期刊文献+

基于星载高速调制器的预失真算法研究 被引量:6

Study on Predistortion Algorithm of Spaceborne High Rate Modulator
在线阅读 下载PDF
导出
摘要 在卫星高速数传系统中,为满足高速率通信业务的需求,新型数字调制体制(如OFDM,M-QAM等)被越来越多地采用,但由此带来的功率放大器的非线性效应也日益严重,对解调器性能造成很大影响.传统的数字预失算法因其收敛速度慢和计算复杂度大的特点不适用于资源严格受限的星载高速数传系统.本文中提出了一种基于QR分解的递归最小二乘算法(QRD-RLS),对该算法进行了理论分析和性能仿真.相比传统的预失真算法,该算法具有稳态误差小、收敛速度快和计算复杂度低的优势.并基于该算法设计了带有预失真器的高速调制器结构,对16QAM信号的实测效果显示,基于QRD-RLS的预失真方案对失真信号补偿效果显著,误差向量幅度(EVM)从7.4%降低到2.5%,带外干扰抑制提升10 dB. In order to meet the demand of high rate communication services in the spaceborne high rate data transmission system,the new digital modulation systems(such as OFDM,M-QAM,etc.)are increasingly used,but the resulting nonlinear effect of the power amplifier is also becoming more serious,which has a great impact on the performance of the demodulator.The traditional digital predistortion algorithm is not suitable for the spaceborne high rate data transmission system with strict resource limitation due to its slow convergence speed and higher computational complexity.In this study,a recursive least squares algorithm based on QR decomposition(QRD-RLS)was proposed.The theoretical analysis and performance simulation of the algorithm were carried out.Compared with the traditional predistortion algorithm,the algorithm has the advantages of small steady-state error,fast convergence speed and low computational complexity.Based on the algorithm,a high rate modulator structure with predistorter was designed.The test results of 16QAM signal show that the predistortion scheme based on QRD-RLS can provide a significant compensation effect on the distortion signal,and the error vector magnitude(EVM)can be reduced from 7.4%to 2.5%,the out of band interference suppression can be increased by 10 dB.
作者 王长红 高飞 杜伟 WANG Chang-hong;GAO Fei;DU Wei(School of Information and Electronics, Beijing Institute of Technology,Beijing 100081, China;The 28th Research Institute of China Electronics Technology Group Corporation,Nanjing,Jiangsu 210007, China)
出处 《北京理工大学学报》 EI CAS CSCD 北大核心 2020年第9期988-993,共6页 Transactions of Beijing Institute of Technology
基金 国家自然科学基金资助项目(U1836201)。
关键词 卫星通信 自适应算法 数字预失真 QR分解 satellite communication adaptive algorithm digital predistortion QR-decomposition
作者简介 王长红(1992—),男,博士生,E-mail:wangchanghong@bit.edu.cn;通讯作者:高飞(1959—),女,教授,博士生导师,E-mail:gaofei@bit.edu.cn。
  • 相关文献

参考文献4

二级参考文献29

  • 1沈英杰,刘郁林,胡中豫.自适应数字预失真方法在功放线性化中的应用[J].重庆邮电学院学报(自然科学版),2005,17(6):687-690. 被引量:4
  • 2盖儒虎.微波放大器的非线性失真分析及线性化技术[J].信息与电子工程,2007,5(1):36-39. 被引量:7
  • 3ZHOU Dayong, VICTOR E. DeBrunner. Novel Adaptive Nonlinear Predistorters Based on the Direct Learning Algorithm [J]. IEEE Transactions on Signal Processing, 2007, 55(01): 120-133.
  • 4WU Shanying, HAU S F S, WONG Y M. The Use of Nonlinear Curve Fitting in Digital Predistortion for Linearizing RF Power Amplifiers[C]. Beijing: Springer, 2005: 960-963.
  • 5JIN M L, KIM S Y, OH D. A Novel Predistorter for Power Amplifier[C]//EEE.3rd International Conference on Microwave and Millimeter Wave Technology. Beijing : IEEE, 2002 : 1129-1133.
  • 6SALEH A. Frequency Independent and Frequency Dependent Nonlinear Models of TWT Amplifiers[J]. IEEE Transactions on Communications, 1981, 29(11): 1715-1720.
  • 7SUNG W, KANG S, KIM P. Performance analysis of APSK modulation for DVB-S2 transmission over nonlinear channels [ J ]. International Journal on Satellite Communications and Networking, 2009, 27(6) : 295-311.
  • 8DING L. Digital predistortion of power amplifiers for wireless applications [ D ]. Atlanta : Georgia Institute of Technology, 2004.
  • 9ZHOU Yu-guang, MCLANE P J, LOO C. Performance of predistorted APK modulation for one-and two-link nonlinear power amplifier satellite communication channels [ J ]. IEEE Transactions on Vehiclar Technology, 2005, 54 (2) : 629-638.
  • 10GIUGNO L, LUISE M, LOTTICI V. Adaptive pre-and post-compensation of nonlinear distortions for high-level data modulations [ J ]. IEEE Transactions on Communications,2004, 5(3) : 1490-1495.

共引文献37

同被引文献41

引证文献6

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部