摘要
射孔密度、孔眼直径和射孔相位角等射孔参数的优化对于海上稠油热采水平井高效、稳定的生产有着重要的作用。以水平井射孔完井产能预测模型和射孔后热采井套管强度损失计算模型为理论基础,通过数值计算对水平井相关射孔参数进行了敏感性分析;在保证套管强度损失在安全生产允许范围内,利用三因素四水平正交试验方法对现场生产井常规射孔参数进行优选,使热采井能够在长期稳定生产的前提下实现产能的最大化。优选分析结果表明,孔径18 mm、孔密60孔/m、相位45°等射孔参数组合可确保热采井生命周期内套管完整,并获得较高的油井产能。本文研究结果对海上稠油热采水平井套管射孔参数的优选具有借鉴意义。
The optimization of perforation parameters,such as shot density,hole diameter and phase angle,is very important to the efficient and stable production of offshore heavy oil thermal recovery horizontal wells.In this paper,based on the theoretical basis of productivity prediction model for the perforation completion of horizontal wells and the strength loss calculation model for casings in thermal recovery wells after perforation,sensitivity analysis on relevant perforation parameters of horizontal wells is carried out through numerical calculation.On the premise of ensuring the casing strength loss within the allowable range for safe production,the conventional perforation parameters of field production wells are optimized by using the“three-factor”and“four-level”orthogonal test method to enable thermal production wells to achieve the maximum production capacity and long-term stable production.The result of optimization analysis shows that the perforation parameter combination of hole diameter 18 mm,shot density 60 holes/m and perforation phase angle 45°can ensure the integrity of casing in the life cycle of thermal production well and obtain high productivity.The results of study provide reference for selecting the casing perforating parameters of offshore heavy oil thermal recovery horizontal wells.
作者
许杰
贾立新
陈毅
张启龙
刘鹏
XU Jie;JIA Lixin;CHEN Yi;ZHANG Qilong;LIU Peng(CNOOC China Limited,Tianjin Branch,Tianjin 300459,China;State Key Laboratory Offshore Oil Exploitation,Tianjin 300459,China)
出处
《中国海上油气》
CAS
CSCD
北大核心
2020年第3期118-123,共6页
China Offshore Oil and Gas
基金
中海石油(中国)有限公司科技项目“渤海油田3000万吨持续稳产关键技术研究”子课题“稠油规模化热采有效开发技术(编号:CNOOC-KJ 135 ZDXM 36 TJ04TJ)”部分研究成果。
关键词
稠油热采
水平井
射孔参数
套管强度
产能
heavy oil thermal recovery
horizontal well
perforation parameter
casing strength
productivity
作者简介
第一作者:许杰,男,高级工程师,2015年毕业于中国石油大学(北京)油气井工程专业,获硕士学位,主要从事钻完井技术研究。地址:天津市滨海新区海川路2121号渤海石油管理局大厦A座(邮编:300459)。E-mail:xujie@cnooc.com.cn。
