期刊文献+

航空发动机应急滑油系统持续供油特性研究 被引量:3

Characteristics of Continuous Oil Supply in Emergency Lubrication System of Aeroengine
在线阅读 下载PDF
导出
摘要 为探究发动机应急滑油系统工作特性,以某型发动机空气引射式应急滑油系统为对象,将数值模拟与实验研究方法相结合,分析了应急滑油系统工作过程。通过非稳态计算获得了不同时刻应急油箱及引射油管内滑油相分布以及滑油消耗量、空气流量和持续供油时间,并分析了引射结构进出口压差对应急滑油系统工作特性的影响。通过对比给定油箱储油量情况下系统供油时间计算值与实验结果,验证了所采用分析方法的可靠性,为同类型航空发动机应急润滑系统的整体研究设计提供了参考思路和解决方案,具有重要的工程应用价值。 In order to explore the operating characteristics of the emergency engine lubrication oil system,we take a certain engine air-ejector emergency lubrication oil system as the object,and combine the numerical simulation and experimental research methods to analyze the working process of the emergency lubrication oil system.The distribution of lubricating oil phase in emergency fuel tank and ejector tubing at different times,as well as the consumption of lubricating oil,air flow rate and continuous oil supply time are obtained through unsteady calculation.The reliability of the analysis method is verified by comparing the calculated value of system oil supply time with the experimental results under the given tank oil storage capacity,which provides a reference and a solution for the overall research and design of emergency lubrication system of the same type of aeroengine,and has important engineering application value.
作者 周琳 曹逸韬 汪峰 ZHOU Lin;CAO Yi-tao;WANG Feng(AECC Hunan Aviation Powerplant Research Institute,Zhuzhou,Hunan 412002;School of Power and Energy,Northwestern Polytechnical University,Xi an,Shaanxi 710072)
出处 《液压与气动》 北大核心 2020年第4期177-182,共6页 Chinese Hydraulics & Pneumatics
关键词 航空发动机 应急滑油系统 两相流模型 持续供油时间 工作特性 aeroengine emergency lubrication oil system two phase flow model continuous oil supply time operating characteristics
作者简介 周琳(1965-),女,陕西西安人,高级工程师,研究方向为航空发动机机械系统润滑、传动等方面。
  • 相关文献

参考文献8

二级参考文献36

  • 1邓斌,李欣,陶文铨.多孔介质模型在管壳式换热器数值模拟中的应用[J].工程热物理学报,2004,25(S1):167-169. 被引量:35
  • 2贺小峰,黄国勤,杨友胜,李壮云.球阀阀口流量特性的试验研究[J].机械工程学报,2004,40(8):30-33. 被引量:41
  • 3毋俊生,康惠宝,李瑞波.蒸气喷射真空泵的计算机辅助设计[J].北京理工大学学报,1996,16(2):211-214. 被引量:3
  • 4吴金星,魏新利,董其伍,刘敏珊.杆支撑换热器壳程的单元流道模型及流场分布[J].化工进展,2007,26(1):69-72. 被引量:8
  • 5李立国,张靖周.航空用引射混合器[M].北京:国防工业出版社,2007.
  • 6Yinhai Zhu, Wenjian Cai. Numerical investigation of geometry parameters for design of high performance ejectors[ J]. Applied Thermal Engineering ,2009,29: 898-905.
  • 7Myoungkuk Ji, Tony Utomo. CFD investigation on the flow structure inside thermo vapor compressor[J].Energy, 2010 : 2694-2702.
  • 8Randheer L. Yadav, Ashwin W. Patwardhan. Design aspects of ejectors_ Effects of suction chamber geometry [ J ]. Chemical Engineering Science, 2008,63 : 3886- 3897.
  • 9Kanjanapon Chunnanond, Satha Aphornratana. An experimental investigation of a steam ejector refrigerator - the analysis of the pressure profile along the ejector [ J ]. Applied Thermal engineering , 2004, 24: 311- 322.
  • 10Huang B J, Chang J M . Empirical correlation for ejector design [ J ]. International Journal of Refrigeration , 1999,22:379-388.

共引文献86

同被引文献23

引证文献3

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部