摘要
利用磷酸铵镁沉降法对氨氮的脱除效果进行了工艺条件探索。以高浓度含氮废水作为研究对象,分别考察了含氮废水的初始pH值、沉淀剂加入方式、反应时间、陈化时间、反应动力条件对磷酸铵镁脱氮率的影响。结果表明,含氮废水的初始pH值为9.5时,磷酸铵镁法对废水中的氨氮去除效果最好,沉淀剂最佳加入方式为配制成溶液逐滴滴加,沉淀陈化20 min是最佳时间,反应30 min、搅拌速率是80 r·min^-1时脱氮率达到最大值。
This study focuses on the application of magnesium ammonium phosphate to the ammonium removal from wastewater.The experimental conditions such as initial value of pH,the adding method of chemicals,aging time,reaction time and stirring rate were investigated in order to obtain the optimized conditions for high removal efficiency.The experimental results show that the optimal initial pH value of solution is 9.5,and the precipitant reagent should be added into wastewater by drop and drop with a stirring rate of 80 r·min^-1 allowing precipitation for 20 minutes and then chemical reaction for 30 minutes.
作者
王芳
徐楠
WANG Fang;XU Nan(School of Chemistry,Biology and Materials Engineering,SUST,Suzhou 215009,China;Jiangsu Key Laboratory of Environmental Functional Materials,Suzhou 215009,China)
出处
《苏州科技大学学报（自然科学版）》
CAS
2019年第3期46-49,共4页
Journal of Suzhou University of Science and Technology（Natural Science Edition）
基金
国家自然科学基金面上项目(21777110)
关键词
磷酸铵镁
脱氮
废水
反应条件
magnesium ammonium phosphate
ammonium removal
wastewater
reaction conditions
作者简介
王芳(1975-),女,新疆昌吉州人,副教授,研究方向:环境功能材料及土壤污染控制;通信作者:徐楠(1976-),女,博士,教授,硕士生导师,E-mail:nanxu@mail.usts.edu.cn。
