期刊文献+

五羰基铁气相爆轰法合成纳米碳胶囊

Synthesis of Nanocarbon Capsules by Vapor Detonation of Pentacarbonyl Iron
在线阅读 下载PDF
导出
摘要 采用气相爆轰法,以乙炔气体、氧气和五羰基铁为原料成功地合成了比表面积为253.857m^2/g的胶囊状碳纳米材料。对反应的前置实验九羰基二铁的热分解反应的研究表明,在60~140℃之间,九羰基二铁热分解为五羰基铁和十二羰基三铁。对爆轰产物进行了XRD、TEM和BET物理吸附实验,结果表明:产物XRD图谱石墨峰明显,产物主要为具有石墨化倾向的薄层胶囊状无定形碳结构;实验产物比表面积为253.857m^2/g,孔体积为0.940cm^3/g,平均孔径为2.731nm;吸附-脱附曲线回滞环类型为H3型,孔结构主要为颗粒堆积而形成的狭缝孔;爆轰产物比表面积较大,具有较强的吸附能力。证实了同样采用铁作为触媒,乙炔在不添加惰性气体作为缓冲剂的情况下,由于爆速过高而无法用于合成碳纳米管。 In this study,the capsular carbon nanomaterials with large specific surface area are synthesized using gas phase detonation method doped with acetylene gas,oxygen and pentacarbonyl iron.The pre-experimental of the reaction for the thermal decomposition reaction of carbonyldiiron showed that the iron octacarbonyl diketones were thermally decomposed according to nine carbonyldiiron decomposed into iron pentacarbonyl and tricarbonyl dodecylcarbonyl between 60 and 140℃.The morphology and components of the synthesized nanoparticles were characterized through X-ray diffraction studies,transmission electron microscopy and physical adsorption instrument analyses.Results showed that the graphite peaks can be clearly observed in XRD pattern and the product is mainly with a structure that capsular amorphous carbon with thin layer which has graphitization tendency.The experimental product has a specific surface area of 253.857 m 2/g,a pore volume of 0.940 cm 3/g and an average pore size of 2.731 nm,type of the hysteresis loop of the adsorption&desorption curve is H3.The pore structure is mainly formed by the accumulation of granules and has a large specific surface area and a strong adsorption capacity.The article confirms that iron is also used as a catalyst.Acetylene cannot be used to synthesize carbon nanotubes without adding an inert gas as a buffering agent due to its high detonation velocity.
作者 李雪琪 李晓杰 闫鸿浩 王小红 潘训岑 LI Xueqi;LI Xiaojie;YAN Honghao;WANG Xiaohong;PAN Xuncen(Department of Engineering Mechanics,Dalian University of Technology,Dalian 116024,China)
出处 《高压物理学报》 EI CAS CSCD 北大核心 2018年第6期31-37,共7页 Chinese Journal of High Pressure Physics
基金 国家自然科学基金(11272081 11672067 11672068)
关键词 气相爆轰合成 纳米材料 胶囊状碳 比表面积 gaseous detonation synthesis nanomaterials capsular carbon specific surface area
作者简介 李雪琪(1992—),女,博士研究生,主要从事爆轰法合成纳米材料研究.E-mail:348379150@qq.com;通信作者:李晓杰(1963—),男,博士,教授,主要从事爆轰及其效应研究.E-mail:Lixq@mail.dlut.edu.cn。
  • 相关文献

参考文献9

二级参考文献81

  • 1罗宁,李晓杰,闫鸿浩,王小红,王立鹤.爆轰合成碳包覆钴、镍磁性纳米颗粒的探索[J].高压物理学报,2009,23(6):415-420. 被引量:8
  • 2李忠全,李玉莲.气体吸附法测定粉末比表面[J].粉末冶金技术,1993,11(4):289-294. 被引量:5
  • 3李先红,崔萍,刘榛榛.双端羧基聚乙二醇的合成[J].化学与生物工程,2005,22(10):42-43. 被引量:10
  • 4Brunauer S, Emmett P H, Teller E. Journal of The American Chemical Society[J], 1938, 60:309
  • 5Institute of Bali Nonferrous Metal Research(宝鸡有色金属研究所).PM Porous Materials Vol.2(粉末冶金多孔材料)[M].Beijing:Metallurgical Industry Press,1979:1
  • 6ASM(美国金属学会).Han Fenglin(韩风麟),Lai Heyi(赖和怡).Metals Handbook Vol 7:Powder Metallurgy,9^th Ed(金属手册:粉末冶金)[M].Beijing:Machinery Industry Press,1994358
  • 7Lowell S, Shieds J E. Powder Surface Area and Porosity, 2 ed[M]. London, New York: Chapman and Hall, 1984
  • 8Langlois S, Coeuret F. Journal of Applied Electrochemistry [J],1989, 19:43
  • 9Huang Peiyun(黄培云).Principle of Powder Metallurgy(粉末冶金原理)[M].Beijing:Metallurgical Industry Press,1997:370
  • 10Montillet A. Comiti J, Legrand J. Journal of Materials Science[J], 1992, 27:4460

共引文献44

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部