摘要
To study the rock breaking method under the free surface induced by disc cutter,the rock breaking simulations were first conducted based on the discrete element method,and the dynamic process of rock breaking under the free surface was studied including stressed zone,crush zone,crack initiation and propagation.Then the crack propagation conditions,specific energy,etc.under different free surface distance(S)were also investigated combined with linear cutting experiments.The results show that the rock breaking process under the free surface induced by disc cutter is dominated by tension failure mode.There exists a critical S to promote crack propagation to free surface effectively.And this rock breaking method can improve the rock breaking force and breaking efficiency significantly when proper.
为了研究临空面下滚刀新型破岩方法,采用离散元法建立了临空面下滚刀破岩模型,模拟了临空面下滚刀作用后密实核形成、裂纹起裂、裂纹扩展等动态过程,并结合线性切割实验研究了不同临空距下裂纹扩展模式、比能耗等变化规律。研究结果表明:临空面下滚刀破碎岩石过程以张拉破坏为主,存在一个临界临空距促使裂纹能有效扩展到临空面。当临空距合理时,临空面下滚刀新型破岩方法能显著降低破岩载荷并提升破岩效率。
作者
ZHANG Xu-hui
XIA Yi-min
ZENG Gui-ying
TAN Qing
GUO Ben
张旭辉;夏毅敏;曾桂英;谭青;郭犇(State Key Laboratory of High Performance Complex Manufacturing(Central South University),Changsha 410083,China;School of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China)
基金
Project(2013CB035401)supported by the National Basic Research Program of China
Project(2012AA041803)supported by the National High-Technology Research and Development Program of China
Project(51475478)supported by the National Natural Science Foundation of China
Project(2015GK1029)supported by the Science and Technology Project of Strategic Emerging Industry in Hunan Province,China
Project(CX2017B048)supported by the Hunan Provincial Innovation Foundation For Postgraduate,China
作者简介
Corresponding author:XIA Yi-min,PhD,Professor,Tel:+86-731-88876926,E-mail:xiaymj@csu.edu.cn,ORCID:0000-0001-6174-0377
