摘要
通过立式喷涂生产线考察了航空用柱段结构产品自动喷涂有机硅涂层时的工艺参数。结果表明,喷涂压力为0.4～0.6 MPa,涂料流量为500～600 mL/min,喷涂距离为200～220 mm,喷枪摆动角度为45°～50°时,所得涂层厚度均匀,外观质量较好。
The process parameters for automatic spraying of silicone coating on the products with cylindrical structure used for aviation were studied on a vertical spraying production line. The results showed that the coatings obtained under the following conditions had a uniform thickness and good appearance: spray pressure 0.4-0.6 MPa, paint flow rate500-600 mL/min, nozzle-to-substrate distance 200-220 mm, and swing angle of spray gun 45°-50°.
作者
尚洪帅
邹松华
杨韶
刘会彬
朱盛兴
SHANG Hong-shuai;ZOU Song-hua;YANG Shao;LIU Hui-bin;ZHU Sheng-xing(Tianjin Long March Launch Vehicle Manufacturing Co.,Ltd.,Tianjin 300462,China)
出处
《电镀与涂饰》
CAS
CSCD
北大核心
2019年第6期266-269,共4页
Electroplating & Finishing
关键词
航空
柱段结构
有机硅涂层
自动喷涂
工艺参数
aviation
cylindrical structure
silicone coating
automatic spray
process parameter
作者简介
尚洪帅(1986–),男,山东德州人,硕士,工程师,研究方向为金属材料腐蚀与防护。
