摘要
文章介绍了超细FeCoCu预合金粉末应用于金刚石钻头胎体中的试验研究。通过基础性试验测试表明:在663Cu含量为30%的前提下,在金刚石钻头胎体组成成分中添加FeCoCu预合金粉末,通过调节其与WC粉末的配比关系,能够有效地调节钻头胎体硬度,适应不同的地层。通过回归分析得到了胎体硬度与FeCoCu粉末加量的数学关系式,由此关系式可预测胎体硬度或计算FeCoCu粉末加量。经过野外实际钻进试验证明:添加了FeCoCu粉末的金刚石钻头胎体综合性能具有较大的提高,为后续钻头耐磨性研究提供了经验积累。
This paper introduces the experimental study on the application of ultrafine FeCoCu pre alloy powder in the matrix of diamond bits. According to the experimental data, with 663Cu contents of 30%, adding FeCoCu prealloy powder to the composition of the diamond bit matrix and by adjusting the proportion of FeCoCu powder and WC powder, the hardness of the diamond bit matrix can be effectively adjusted to adapt to different strata. Through the regression analysis, the mathematical relationship between the matrix hardness and FeCoCu contents is obtained, by which, the matrix hardness can be predicted and FeCoCu dosage also can be calculated. The actual drilling tests in field show that the comprehensive performance of the diamond bits matrix with FeCoCu pre-alloy powder is significantly improved, this experimental study provides experiences for further research on wear resistance of diamond bits.
作者
李俊萍
胡立
唐治建
邓伟
LI Jun-ping;HU Li;TANG Zhi-jian;DENG Wei(Institute of Exploration Technology,CAGS,Chengdu Sichuan 611734,China;Technical Center for Geological Hazard Prevention and Control,CGS,Chengdu Sichuan 611734,China)
出处
《探矿工程（岩土钻掘工程）》
2018年第8期19-22,共4页
Exploration Engineering:Rock & Soil Drilling and Tunneling
基金
国土资源部深部地质钻探技术重点实验室2017年度开放课题项目"基于Fe-Co-Cu多元化粘结材料的金刚石钻头研究"(编号:K201704)
中国地质调查局地质调查项目"油气田勘查区砂岩型铀矿调查与勘查示范"(编号:DD20179103)
作者简介
李俊萍，女，汉族，1986年生，硕士，长期从事钻探器具设计与研发工作，四川省成都市郫都区现代工业港（北区）港华路139号，lijunping_xp@163．com。
