期刊文献+

基于阵列微通道的电磁成形数值模拟及实验研究

Numerical simulation and experimental study based on electromagnetic forming of array of micro channel
在线阅读 下载PDF
导出
摘要 基于ANSYS有限元模拟平台,建立箔板电磁微成形有限元模型,开展阵列通道电磁微成形过程的有限元模拟分析,获得均匀压力线圈电磁力分布规律及箔板电磁微成形过程中零件不同区域典型点动态响应过程.模拟结果显示,电磁微成形过程中均匀压力线圈能够为金属箔板变形区域提供始终保持均匀的电磁力作用,在成形过程中零件不同区域典型点与模具表面高速碰撞后发生不同程度的弹复运动.使用内凹型和外凸型两种形式模具,开展阵列通道电磁微成形实验,微通道高度充填比分别达到93%和100%,微通道最大充填相对误差分别为0.014 8和0.019 6.结果表明,电磁微成形技术能够成形出一致性好的阵列微通道零件. The finite element model of electromagnetic micro forming on metal foil was established based on the finite element simulation platform.The finite element simulation was performed on the array of micro channel formed by electromagnetic micro-forming.The distribution of magnetic stress of uniform stress coil and dynamic response process of typical points in different area were obtained in electromagnetic forming process.The simulation results show that the electromagnetic forming can provide uniform distribution stress on the deformation region.At the same time,various degrees of rebound phenomenon takes place on different typical dots on the component plane area after colliding with die surface.Electromagnetic micro-forming experiment was conducted on the array of micro channels by concave and convex mold.The filling ratio of the micro channels was 93%and 100%respectively.The relative error of filling ratio between micro channels was 0.014 8and 0.019 6respectively.Results show that array channel components with favorable consistency can be formed by the electromagnetic forming.
作者 赵庆娟 徐杰 单德彬 郭斌 ZHAO Qing-juan XU Jie SHAN De-bin GUO Bin(School of Materials Science and Engineering , Harbin Institute of Technology , Harbin 150001 , China Key Laboratory of Micro-systems and Micro-structures Manufacturing , Ministry of Education, Harbin Institute of Technology, Harbin 150080, China)
出处 《浙江大学学报(工学版)》 EI CAS CSCD 北大核心 2017年第1期198-203,共6页 Journal of Zhejiang University:Engineering Science
基金 国家"973"基础研究发展规划资助项目(2012CB934100) 国家青年基金资助项目(51375113)
关键词 微成形 电磁成形 阵列微通道 有限元模拟 micro-forming electromagnetic forming array channel finite element simulation
作者简介 赵庆娟(1982-),女,博士,从事电磁微成形的研究.ORCID:0000-0001-9705-7676.E-mail;lanxi0211@163.com 通信联系人:郭斌,男,教授.ORCID:0000-0002-7093-2677.E-mail:bguo@hit.edu.cn
  • 相关文献

参考文献6

二级参考文献54

  • 1成群林,柯映林,董辉跃.航空铝合金高速铣削加工的有限元模拟[J].浙江大学学报(工学版),2006,40(1):113-117. 被引量:23
  • 2邓将华,李春峰.磁脉冲冲孔试验研究[J].锻压技术,2006,31(5):140-143. 被引量:2
  • 3韩飞,莫健华,黄树槐.电磁成形技术理论与应用的研究进展[J].锻压技术,2006,31(6):4-8. 被引量:11
  • 4Engel U, Eckstein R. Microforming from basic research to its realization [J]. Journal of Materials Processing Technology, 2002, 125-126 (9) : 35-44.
  • 5李政,金先龙,陈向东.柔性储液容器跌落碰撞仿真方法的研究[J].振动与冲击,2007,26(8):72-75. 被引量:5
  • 6HOU Z B,KOMANDURI R.Modeling of thermomechanical shear instability in machining[J].International Journal of Mechanical Sciences,1997,39(11):1273-1314.
  • 7ELBESTAWI M A,SRIVASTAVA A K,ElWARDANY T I.A model for chip formation during machining of hardened steel[J].Annals of CIRP,1996,45(1):71-76.
  • 8GUO Y B,YEN D W.A FEM study on mechanisms of discontinuous chip formation in hard machining[J].Journal of Materials Processing Technology,2004,155-156:1350-1356.
  • 9HKS Inc.ABAQUS analysis user's manual[M].Version6.[s.n.]:[S.l.]:,2005.
  • 10KALPAKJIAN S.Manufacturing process for engineering materials[M].3rd ed.Menlo Park:Addison-Wesley/Long-man,1997.

共引文献26

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部