期刊文献+

原位自生TiB_2/A356复合材料组织及性能的研究

Effect of TiB_2 Content on Microstructure and Mechanical Properties of TiB_2/A356 Composites
原文传递
导出
摘要 采用原位自生的方法成功制备了TiB2/A356复合材料,研究了不同TiB2颗粒含量对TiB2/A356复合材料组织及力学性能的影响。结果表明,TiB2颗粒的尺寸为150~560nm时对复合材料有显著地细化、抑制枝晶长大的作用。随着TiB2颗粒含量的增加,复合材料的强度随之升高而伸长率降低。复合材料的屈服强度为242~265 MPa,抗拉强度为270~297 MPa,伸长率为4.2%~5.8%。 The in-situ TiB2/A356 was synthesised successfully to understand effects of different TiB2 addition on the microstructure and mechanical properties of TiB2/A356 composites.The results indicate that with the reinforced TiB2 particles of 150~560nm,grain size in the composites is refined obviously,meanwhile,dendrite growth is inhibited.The strength of the composites is increased while elongation is decreased with the increase of TiB2 addition.The yield strength,tensile strength and elongation of TiB2/A356 composites reach 242~265 MPa,270~297 MPa and 4.2%~5.8%,respectively.
出处 《特种铸造及有色合金》 CAS CSCD 北大核心 2016年第9期913-917,共5页 Special Casting & Nonferrous Alloys
关键词 原位自生 复合材料 颗粒增强 TIB2颗粒 A356合金 In-Situ Composites Particulate Reinforcements TiB2 Particles A356Alloy
作者简介 徐佐,男,1965年出生,高级经济师,中信戴卡股份有限公司,河北秦皇岛(066000),电话:03355358588,E—mail:dieter.dai@dicastal.com 通信作者:刘春海,男,1963年出生,教授级高级工程师,中信戴卡股份有限公司工程技术研究院,河北秦皇岛(066000),电话:03355358286,E-mail:liuchunhai@dicastal.com
  • 相关文献

参考文献19

  • 1张建平,乐永康,毛建伟.原位自生TiB_2/7055复合材料的组织与力学性能[J].特种铸造及有色合金,2009,29(3):249-251. 被引量:7
  • 2WOOD J V, DAVIES P, KELLIE J L F. Properties of reactivelycast aluminum-TiB;j alloys[J]. Mater Sci. and Tech.,1993 (9):833-840.
  • 3MIRACL E D H. Metal matrix composites-From science to techno-logical significance[J], Compos. Sci. Technol. , 2005, 65(15-16):2 526-2 540.
  • 4KACZMAR J W,PIETR2AK K,WOSISKI W. The productionand application of metal matrix composite materials[J]. J. Mater.Process Technol.,2000, 106(1-3): 58-67.
  • 5克莱因,威瑟斯.金属基复合材料导论[M].北京:冶金工业出版社,1996.
  • 6NAKATA H, CHOH T, KANETAKE N. Fabrication and me-chanical properties of in-situ formed carbide particulate reinforcedaluminum composite[J]. J. Mater. Sci.,1995 30 (7): 1 719-1 727.
  • 7WEIRAUCH DA, KRAFICK WJ, ACKARTG, et al. The wet-tability of titanium diboride by molten aluminum drops[J]. j. Ma-ter. Sci.,2005, 40(9): 2 301-2 306.
  • 8KENNEDY A R, KARANTZALIS A E,WYATT S M. The mi-crostructure and mechanical properties of 丁iC and T1B2-reinforcedcast metal matrix composites[J]. J. Mater. Sci. , 1999, 34(5):933-940.
  • 9WOOD J V, DAVIES P, KELLIE J L F. Properties of reactivelycast aluminium-TiB2 alloys[J]. Mater. Sci. Technol. , 1993, 9(10): 833-840.
  • 10FENG C F, FROYEN L. Microstructures of in situ Al/TtB2MMCs prepared by a casting route[J], J. Mater. Sci.,2000,35(4): 837-850.

二级参考文献10

共引文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部