摘要
在空间漂浮平台上,两自由度转台在跟踪指向空间目标的过程中对平台会产生姿态扰动,使平台姿态发生变化,从而影响转台末端的空间指向,降低指向跟踪精度,因此转台与平台间存在耦合关系.当指向机构的转动惯量相对较大或快速精密指向时这种耦合关系变得不可忽视.为改善这一情况下的跟踪控制精度,提出了耦合补偿方法,加入平台实时姿态来修正转台跟踪的目标,并使用结合反馈线性化的状态反馈控制方法,最终通过仿真实验与传统PD控制方法进行对比,结果表明结合反馈线性化的状态反馈控制方法有效提高了跟踪精度.
2-DOF（ degree of freedom） gimbal mounted on floating space platform caused attitude disturbance to the platform while pointing and tracking a space object. Therefore the attitude of platform was affected then the pointing direction of the end of the gimbal changed and the pointing accuracy was reduced. So the gimbal and the platform were dynamically coupled. This problem could not be ignored especially when the inertia of the gimbal was not small enough compared to that of the platform or when the gimbal was rotating fast. In order to solve this problem,a coupling compensation method was put forward. In this method,attitude motion of platform caused by the rotation of gimbal was considered to revise the tracking target of the gimbal.Furthermore,feedback linearized state feedback was used as control method. At last a simulation was carried out to compare the pointing accuracy between traditional PD control method and the method put forward. It is verified that the pointing accuracy is efficiently improved by using linearization and state feedback as control method.
出处
《北京航空航天大学学报》
EI
CAS
CSCD
北大核心
2015年第9期1567-1573,共7页
Journal of Beijing University of Aeronautics and Astronautics
关键词
漂浮基
跟踪控制
耦合关系
反馈线性化
状态反馈
floating platforms
tracking control
coupling
feedback linearization
state feedback
作者简介
通讯作者：赵国伟（1976-），男，甘肃景泰人，副教授，zhaoguowei@buaa．edu．cn，主要研究方向为航天飞行器设计、航天器结构机构动力学与控制．
