期刊文献+

三种氧化锆瓷块透光率与色度值的线性关系分析 被引量:1

Analysis of linearity between light transmittance and color value of three different brands of zirconia ceramics
在线阅读 下载PDF
导出
摘要 目的分析3种不同厚度、不同颜色氧化锆瓷材料的透光率与色度值的关系,为全瓷修复体颜色复现引入透光率系数提供依据,以更好地模拟天然牙本质的光学特性。方法利用X-rite color i7分光光度仪分别对三种品牌(Lava、Upcera、Doceram)不同颜色、不同厚度(0.9、0.6、0.3 mm)的氧化锆瓷片进行透光率和反射率(L*、a*、b*)的测量,采用SPSS18.0软件对结果进行多元线性分析,探讨透光率与厚度及色度值的线性关系。结果 3种品牌的氧化锆瓷片的透光率差异无统计学意义(P〉0.05)。0.9、0.6、0.3 mm 3种厚度的氧化锆瓷片的透光率范围分别为13.63%~27.47%、18.05%~33.96%、25.24%~39.73%,差异有统计学意义(P〈0.05)。Upcera、Doceram、Lava 3种品牌的氧化锆瓷片透光率与厚度、色度值之间存在线性关系,回归方程分别为:TT=0.366×L*-0.661×厚度-b*×0.280,TT=0.524×L*-0.536×厚度-0.237×b*,TT=0.210×L*-0.610×厚度-0.164×b*。结论 3种品牌的氧化锆瓷片透光率范围无明显差异;随着瓷片厚度的增加,透光率逐渐减小;随着瓷片亮度的增加,透光率逐渐升高;瓷片越偏蓝色,透光率越高。因此,在全瓷修复过程中,引入透光率系数这一比色指标从而重新定义天然牙颜色的认知和表述形式是十分必要的。 Objective To analyze the relationship between the light transmittance and the color value of 3 different brands of zireonia dental ceramic materials of various thicknesses and colors, so as to provide evidence for a new indicator to the Colorimetric system to better simulate the natural dentin color. Methods X-rite color i7 spectrophotometer was used to measure the transmittance and reflectance (L* , a* , b* ) of three brands (Lava, Upcera, Doceram) of zirconia ceramic materials of different colors and different thicknesses (0. 9, 0. 6 and 0. 3 ram). The results were analyzed by SPSS18. 0 software to investigate the linearity of transmittance with thickness and color values of the materials. Results The transmittance was not significantly different among the three brands of zirconia ceramic materials (P〉0.05); the transmittance ranges of different thicknesses of zirconia ceramic (0. 9, 0. 6 and 0.3 mm) were 13.63%-27.47%, 18. 05%-33. 96%, and 25. 24%-39. 73%, respectively, showing significant difference (P〈0.05). There was a linear relation of the transmittance with the thickness and color values of the three brands of zirconia ceramic materials: Upcera: TT = 0. 366 × L* -- thickness × 0. 661 -- 0. 280 ×b* Doceram: TT=0.524×L* -- 0. 536 )4 thickness-- 0. 237 × b* ; Lava: TT=0.210×L* -- 0. 610 × thickness-- 0. 164×b*. Conclusion The transmittance ranges of the three brands of zirconia ceramic material are similar. The transmittance decreases with increase of its thickness and increases with luminance increase. Bluer zirconia ceramic has higher transmittance. Therefore, introduction of transmittance value for ceramic restoration process is important to redefine the natural tooth color perception and representation.
出处 《第二军医大学学报》 CAS CSCD 北大核心 2015年第1期54-57,共4页 Academic Journal of Second Military Medical University
基金 国家自然科学基金(81271177)~~
关键词 义齿 氧化锆全瓷 透光率 颜色 dentures zirconia ceramic transmittance color
作者简介 李晨,硕士生.E-mail:runlcmx@qq.com Tel:021-83663679,Email:wang-dento@163.com
  • 相关文献

参考文献17

  • 1McLean J W.Evolution of dental ceramics in the twentieth century[J].J Prosthet Dent,2001,85:61-66.
  • 2Conrad H J, Seong W J, Pesun I J.Current ceramic materials and systems with clinical recommendations: a systematic review[J].J Prosthet Dent, 2007, 98:389-404.
  • 3Griggs J A.Recent advances in materials for all-ceramic restorations[J].Dent Clin North Am,2007,51:713-727.
  • 4Bona A D, Kelly J R.The clinical success of all-ceramic restorations[J].J Am Dent Assoc,2008,139 Suppl:8S-13S.
  • 5Xiong F, Chao Y, Zhu Z.Translucency of newly extracted maxillary central incisors at nine locations[J].J Prosthet Dent,2008,100:11-17.
  • 6Yu B, Ahn J S, Lee Y K.Measurement of translucency of tooth enamel and dentin[J].Acta Odontol Scand,2009,67:57-64.
  • 7苏亚丽,韩建国,王少海,杨锋.牙釉质与牙本质的透光率分析[J].口腔医学研究,2014,30(1):40-43. 被引量:4
  • 8Kelly J R, Nishimura I, Campbell S D.Ceramics in dentistry: historical roots and current perspectives[J].J Prosthet Dent, 1996,75:18-32.
  • 9Wang F, Takahashi H, Iwasaki N.Translucency of dental ceramics with different thicknesses[J].J Prosthet Dent,2013,110:14-20.
  • 10Agustín-Panadero R, Román-Rodríguez J L, Ferreiroa A, Solá-Ruíz M F, Fons-Font A.Zirconia in fixed prosthesis.A literature review[J].J Clin Exp Dent, 2014,6: 66-73.

二级参考文献36

  • 1[1]Chong KH, Chai J, Takahashi Y, et al. Flexural strength of In-Ceram alumina and In-ceram zirconia core materials[J]. Int J Prosthodont, 2002, 15:183 ~ 188
  • 2[2]Tinschert J, Zwez D, Marx R, et al. Structural reliability of alumina-, feldspar-, leucite-, mica and zirconia-based ceramics[J]. J Dent, 2000, 28(7):529 ~ 535
  • 3[3]Seghi RR, Sorensen JA. Relative flexural strength of six new ceramic materials[J]. Int J Prosthodont, 1995, 8(3):239 ~ 246
  • 4[5]Heffernan M J, Aquilino SA, Diaz-Arnold AM, et al. Relative translucency of six all-ceramic systems. Part Ⅰ:core materials[J]. J Prosthet Dent, 2002, 88(1):4 ~ 9
  • 5[7]Douglas RD, Przybylska M.Predicting porcelain thickness required for dental shade matches[J].J Prosthet Dent,1999, 82(2):143 ~ 149
  • 6Pippin DJ,Mixson JM,Soldan-els AP.Clinical evaluation of restored maxillary incisors:Veneers vs PFM crowns[J].J Am Dent Assoc,1995,126(11):1523-1529.
  • 7Cattell MJ,Clarke RL,Lynch EJ.The transverse strength,reliability and microstructural features of four dental ceramicsPart Ⅰ[J].J Dent,1997,25 (5):399-407.
  • 8Cattell MJ,Clarke RL,Lynch EJ.The biaxial flexural strength and reliability of four dental ceramics--Part Ⅱ[J].J Dent,1997,25 (5):409-414.
  • 9Shang X,Mu Y.Clinical application and effective assessment of cerinate porcelain laminate veneers[J].Chin Med J (Engl),2002,115(11):1739-1740.
  • 10Christensen GJ,Christensen RP.Clinical observations of porcelain veneers:A three-year report[J].J Esthet Dent,1991,3(5):174-179.

共引文献13

同被引文献7

引证文献1

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部