期刊文献+

氧杂环丁烷/丙烯酸酯混杂体系的光固化性能研究 被引量:3

Study on the Properties of Oxetane/Acrylate UV-cured Hybrid System
在线阅读 下载PDF
导出
摘要 以氧杂环丁烷和丙烯酸酯为主要原料,加入一定量光引发剂配制成一种新型的光固化混杂体系。研究了混杂体系中引发剂的协同作用,结果显示自由基引发剂对阳离子引发剂有增感作用。通过吸水性测试、红外光谱(FTIR)、热重分析(TGA)、扫描电镜(SEM)等手段研究了固化膜的性能,结果显示混杂固化膜的力学性能、耐溶剂性能和热稳定性要优于自由基固化膜,这是由于混杂体系在固化过程中形成了高分子互穿网络结构(IPN),其中混杂固化膜的拉伸强度为10.34 MPa,断裂伸长率为10.13%,冲击强度为15 kg·cm,附着力为1级,柔韧性小于3mm,耐丙酮来回擦拭次数为200次。 A novel UV-cured hybrid system was prepared by using oxetane and acrylate as main materials,a certain amount of photoinitiator was added into hybrid system.The synergistic effect of photoinitiators was researched,result showed cationic photoinitiator was sensitized by free radical photoinitiators.Properties of UV-cured films were studied by water absorption test,FTIR,TGA and SEM.The results showed that mechanical property,thermal stability and solvent resistance property of hybrid films were better than those of free radical films because of the formation of interpenetrating polymer network(IPN) during the curing process of hybrid system.The tensile strength of hybrid film was 10.34 MPa,elongation at break was 10.13%,impact strength was 15 cm· kg,adhesion grade was 1,flexibility was less than 3 mm,double acetone rubs was 200.
出处 《影像科学与光化学》 CAS CSCD 北大核心 2014年第3期289-299,共11页 Imaging Science and Photochemistry
基金 江西省教育厅基金项目(GJJ12037) 南昌市科技局基金项目(2013HZCG007)资助
关键词 氧杂环丁烷 混杂体系 光引发剂 高分子互穿网络 力学性能 oxetane hybrid system photoinitiator interpenetrating polymer network mechanical properties
作者简介 通讯作者,E-mail:hbwjxnc@sina.com
  • 相关文献

参考文献15

二级参考文献158

共引文献49

同被引文献20

  • 1赵晓霞,魏文珑,常宏宏,王志忠.碳酸二乙酯合成3-羟甲基-3-乙基氧杂环丁烷的工艺研究[J].太原理工大学学报,2008(S1):159-161. 被引量:1
  • 2Decker C. Kinetic study and new applications of UV radia- tion curing [J]. Macromolecular Rapid Communications, 2003, 23(18) : 1067-1093.
  • 3Golden R. Lower-emission technologies: a path to greener industry[J]. RadTech Report, 2005, 19(3).. 14-18.
  • 4Valet A. Outdoor applications of UV curable clearcoats--a real alternative to thermally cured clearcoats[J]. Progress in Organic Coatings, 1999, 35(1-4) : 223-233.
  • 5Kuo K H, Chiu W Y, Don T NL Synthesis of UV-curable/ alkali-soluble dispersants used for black photoresist with a high loading of carbon black[J]. Journal of Applied Poly- mer Science, 2010, 115(3): 1803-1813.
  • 6Pappas S. Radiation Curing Science and Technology [M]. New York: Plenum Press, 1992.
  • 7Moon J H, Shul Y G, Hart H S, Hong SY, Choi Y S, Kim H T. A study on UV-curable adhesives for optical pick-up: I. Photo-initiator effects[J]. International Journal of Ad- hesion and Adhesives, 2005, 25(4): 301-312.
  • 8Moon J H, Han H S, Shul Y G, Jang D H, Ro M D, Yun D S. A study on UV-curable coatings for HD-DVD: Primer and top coats[J]. Progress in Organic Coatings, 2007, 59 (2) : 106-114.
  • 9Scalera F, Corcione C E, Montagna F, Sannino A, Maffez- zoli A. Development and characterization of UV curable epoxy/hydroxyapatite suspensions for stereolithography applied to bone tissue engineering [J]. Ceramics Interna- tional, 2014, 40(10) : 15455-15462.
  • 10Gaston A, Khokhar A Z, Bilbao L, S ez-Mart nez V, Cortes A, Obieta I, Gadegaard N. Nanopatterned UV cur- able hydrogels for biomedical applieations[J]. Microelec- tronic Engineering, 2010, 87(5-8) : 1057-1061.

引证文献3

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部