Dynamic Recrystallization Behavior and Microstructure Evolution of AISI 304N Stainless Steel 被引量：11

Dynamic Recrystallization Behavior and Microstructure Evolution of AISI 304N Stainless Steel

导出

摘要 Dynamic recrystallization of 304N stainless steel was investigated at deformation temperatures of 900- 1 300 ℃ and strain rates of 0.01 10 s by a Gleeble-1500 thermo-mechanical simulator. And the microstructure evolu lions of specimens with different deformation temperatures were observed by using a transmission electron micro scope. Results indicated that compared with conventional AISI 304 austenitie stainless steel, 304N stainless steel has higher deformation resistance force and deformation activation energy under similar conditions. In addition, the flow stress constitutive equation of 304N stainless steel was obtained by regression analysis of experimental stress strain data, and the calculated values proposed by the mathematical model agree well with the experimental results. Dynamic recrystallization of 304N stainless steel was investigated at deformation temperatures of 900- 1 300 ℃ and strain rates of 0.01 10 s by a Gleeble-1500 thermo-mechanical simulator. And the microstructure evolu lions of specimens with different deformation temperatures were observed by using a transmission electron micro scope. Results indicated that compared with conventional AISI 304 austenitie stainless steel, 304N stainless steel has higher deformation resistance force and deformation activation energy under similar conditions. In addition, the flow stress constitutive equation of 304N stainless steel was obtained by regression analysis of experimental stress strain data, and the calculated values proposed by the mathematical model agree well with the experimental results.

作者 WANG Chang-jun FENG Han ZHENG Wen-jie SONG Zhi-gang YONG Qi-long

机构地区 Central Iron and Steel Research Institute

出处《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2013年第10期107-112,共6页

基金 Item Sponsored by High-Tech Research and Development Program(863 Program)of China(2006AA03Z525)

关键词 304N stainless steel dynamic recrystallization constitutive equation microstructure evolution 304N stainless steel dynamic recrystallization constitutive equation microstructure evolution

分类号 TG142.71 [金属学及工艺—金属材料]

作者简介 Biography：WANG Chang- jun（1984- ）, Male, Doctor Candidate; E-mail： dajun198451@163.com

引文网络
相关文献

参考文献24

1LU Shi-ying , ZHANG Ting-kai , YANG Chang-qiang , et a1. Stainless Steel [M]. Beijing: Atomic Energy Press. 1995 (in Chinese).
2Uggowitzer P J. Magdowski R. Speidel M O. Nickel Free High Nitrogen Austenitic Steels [n. IS1]Int. 1996.36(7): 901.
3Newman R C. Shahrabi T. The Effect of Alloyed Nitrogen or Dissolved Nitrate Ions on the Anodic Behaviour of Austenitic Stainless Steel in Hydrochloric Acid [n. Corros Sci. 1987. 27 (8): 827.
4Sadough- Vanini A. Audouard J P. Marcus P. The Role of Nitrogen in the Passivity of Austenitic Stainless Steels [J]. Corros Sci. 1994.36(11): 1825.
5Olefjord I. Wegrelius L. The Influence of Nitrogen on the Passivation of Stainless Steels [n. Corros Sci. 1996. 38(7): 1203.
6Iargelius-Pettersson R F A. Electrochemical Investigation of the influence of Nitrogen Alloying on Pitting Corrosion of Austenitic Stainless Steels [J]. Corros Sci. 1999.41(8): 1639.
7Cho S H. Yoo Y C. Hot Rolling Simulations of Austenitic Stainless Steel [J]. J Mater Sci. 2001. 36(7): 4267.
8Ebrahimi G R. Keshmiri H. Momeni A. et al. Dynamic Recrystallization Behavior of a Superaustenitic Stainless Steel Containing 16% Cr and 25% Ni [J]. Mater Sci Eng. 2011. 528A(25): 7488.
9Elwahabi M. Gavard L. Montheillet F. et al. Effect of Initial Grain Size on Dynamic Recrystallization in High Purity Austenitic Stainless Steels [J]. Acta Mater. 2005. 53(7): 4605.
10Dehghan-Manshadi A. Barnett MR. Hodgson P D. Recrystallization in AISI 304 Austenitic Stainless Steel During and After Hot Deformation [J]. Mater Sci Eng. 2008. 485A(l/ 2): 664.

同被引文献63

1H.Q.Chen J.S.Liu H.G.Guo.RESEARCH ON HOT FORMING PROCESS OF A RETAINING RING OF HIGH-NITROGEN STEEL[J].Acta Metallurgica Sinica(English Letters),2004,17(5):767-770. 被引量：4
2张北江,赵光普,焦兰英,胥国华,秦鹤勇,冯涤.热加工工艺对GH4586合金微观组织的影响[J].金属学报,2005,41(4):351-356. 被引量：37
3王艳,王明家,蔡大勇,熊良银,王青峰.高强度奥氏体不锈钢的热变形行为及其热加工图[J].材料热处理学报,2005,26(4):65-68. 被引量：35
4鞠泉,李殿国,刘国权.15Cr-25Ni-Fe基合金高温塑性变形行为的加工图[J].金属学报,2006,42(2):218-224. 被引量：57
5潘红波,唐荻,胡水平,王潇潇.平面应变压缩技术的研究[J].锻压技术,2008,33(2):75-79. 被引量：8
6孟亚惠,季根顺,樊丁,张建斌.不锈钢高温组织与高温力学性能研究进展[J].热加工工艺,2009,38(4):12-16. 被引量：9
7王静宜,谈育煦,马增海.奥氏体不锈钢在恒应变疲劳过程中的组织结构研究[J].金属学报,1990,26(2). 被引量：5
8姜周华,刘喜海,张颖,尹立新,赵林,金东国.电渣重熔Mn18Cr18N钢铸态热塑性与组织的关系[J].钢铁研究学报,1998,10(6):37-40. 被引量：5
9郭银芳,刘建生,何文武.Mn18Cr18N护环钢的动态再结晶行为及功率耗散图[J].机械工程材料,2010,34(3):5-8. 被引量：7
10张传滨,刘洁,张进学,范光伟.核电用304不锈钢动态再结晶数学模型的建立[J].铸造设备与工艺,2011(1):16-19. 被引量：10

引证文献11

1王稳,罗锐,苗现华,桂香,杨雨童,陈乐利,王威.超超临界火电用奥氏体耐热钢的热变形行为[J].塑性工程学报,2018,25(6):154-160. 被引量：8
2陈慧琴,wang zhenxing,qin fengming,jia peijie,zhao xiaodong.Hot Deformation Behavior and Processing Maps of As-cast Mn18Cr18N Steel[J].Journal of Wuhan University of Technology(Materials Science),2017,32(4):935-943. 被引量：5
3庄海华,杨柱,刘运腾,周吉学,马百常,王金伟.AZ31镁合金无缝管挤压动态再结晶数值模拟研究[J].山东科学,2017,30(5):45-49. 被引量：2
4廖喜平,谢其军,胡成亮,赵震.304奥氏体不锈钢热变形行为及热加工图[J].锻压技术,2017,42(12):150-156. 被引量：21
5Rui Luo,Qi Zheng,Jing-Jing Zhu,Shun Guo,Dong-Sheng Li,Gui-Fang Xu,Xiao-Nong Cheng.Dynamic recrystallization behavior of Fe–20Cr–30Ni–0.6Nb–2Al–Mo alloy[J].Rare Metals,2019,38(2):181-188. 被引量：2
6程晓农,桂香,罗锐,徐桂芳,袁志钟,周宇森,高佩.新型奥氏体耐热钢CHDG-A的动态再结晶行为及其动力学模型[J].材料研究学报,2020,34(8):611-620. 被引量：1
7张学瑞,秦凤明,何文武,陈慧琴.电渣重熔Mn18Cr18N钢的热变形行为与本构方程[J].太原科技大学学报,2020,41(6):488-494. 被引量：2
8罗锐,谭莉,陈乐利,陈佳宇,刘玉,高佩,程晓农.核电厂反应堆压力容器O型密封管用GH4169合金的热加工性能及组织演变[J].压力容器,2022,39(6):7-14. 被引量：1
9李昌义,王行,王爱琴,谢敬佩,禹兴胜,石如星,王文焱.大型奥氏体不锈钢锻件的晶粒尺寸控制[J].锻压技术,2022,47(8):22-28. 被引量：4
10王行,王爱琴,李昌义,谢敬佩,禹兴胜,宋玉冰.核电阀门用不锈钢热变形行为研究及应用[J].锻压技术,2022,47(12):221-226. 被引量：1

二级引证文献47

1王稳,罗锐,苗现华,桂香,杨雨童,陈乐利,王威.超超临界火电用奥氏体耐热钢的热变形行为[J].塑性工程学报,2018,25(6):154-160. 被引量：8
2侯旭,姚毅,胡鑫帅.320系列链板节直切直冲工艺[J].锻压技术,2019,44(1):22-26.
3王雪,于秀涛.Mn含量对车梁用高锰奥氏体TWIP钢拉伸变形行为的影响[J].锻压技术,2019,44(9):151-155. 被引量：2
4刘盼,魏燕,胡昌义,蔡宏中,李旭铭,潘新东.压力和温度对铱铑合金热等静压致密化的影响[J].贵金属,2019,40(S01):11-15. 被引量：1
5王鑫田,武会宾,刘贺,牛刚,顾洋,王超.奥氏体不锈钢热变形行为的研究[J].热加工工艺,2019,48(22):31-34. 被引量：2
6罗登,赵菲,刘丹,张青学,王莲芳,李红英.工程机械用Q1100钢的J-C本构修正模型[J].塑性工程学报,2020,27(6):155-164. 被引量：3
7李新生,王广春,丁明琦,田晨晟,谷国超,吕宇鹏.芯轴拔长过程中翻转组合对变形均匀性的影响[J].塑性工程学报,2020,27(8):18-24. 被引量：2
8万志鹏,王涛,李钊,李佩桓,张勇,孙宇,胡连喜.绝热升温与摩擦效应对合金热压缩变形流动应力的影响[J].塑性工程学报,2020,27(8):166-171. 被引量：7
9孟令威,孟令玺.耐热钢热扭转变形行为研究[J].兵器材料科学与工程,2020,43(6):38-41. 被引量：1
10赵卫东,何建丽,何进,吕刚.基于Matlab镁合金热加工图建立与分析[J].智能计算机与应用,2020,10(5):139-142.

1Xu WANG,Sigen WANG and Lixian HUA (Dept. of Materials Science and Engineering, University of Science and Technology Beijing, Beijing, 100083, China).Transformation Behaviour of Austenite in Steel under Condition of Stress-strain and Its Application[J].Journal of Materials Science & Technology,1995,11(6):440-442.
2LI Miaoquan,LUO Jiao,and PAN Hongsi School of Materials Science and Engineering,Northwestern Polytechnical University,Xi’an 710072,China.Microstructure evolution in the high temperature compression of Ti-5.6Al-4.8Sn-2.0Zr alloy[J].Rare Metals,2010,29(5):533-537. 被引量：2
3ZHANG Tong-bo,SHEN Yong,LIU Pan,YONG Qi-long,BAO Yao-zong.New Type Austenite Dynamic Recrystallization of Microalloyed Forging Steels 38MnVS During Forging Process[J].Journal of Iron and Steel Research International,2013,20(5):57-60.
4李静波,张维敬,李长荣,杜振民.Thermodynamic Assessments of Ternary Ga-As-P,Ga-P-Sb,In-As-P and In-P-Sb Systems[J].Rare Metals,2000,19(4):248-254.
5Ali Reza Hosein Zadeh,Iman Danaee,Mohamad Hosein Maddahy.Thermodynamic and Adsorption Behaviour of Medicinal Nitramine as a Corrosion Inhibitor for AISI Steel Alloy in HCl Solution[J].Journal of Materials Science & Technology,2013,29(9):884-892. 被引量：5
6Y. Huo,Y. Chen,X. Zu and M. Tu( Department of Metal Materials, Sichuan University, Chengdu 610065, China)( Department of Metal Materials, Sichuan University, Chengdu 610065, China)( Department of Metal Materials, Sichuan University, Chengdu 610065, China.STRESS-STRAIN HYSTERESIS OF POLYCRYSTALLINE SMAs─Ⅰ:A MODEL[J].Acta Metallurgica Sinica(English Letters),1999,12(3):205-210. 被引量：2
7Vitaly Petrovsky.Electrical Response on Microstructure Evolution of Multicomponent Ceramic Matrix Materials[J].材料科学与工程（中英文版）,2010,4(2):39-51.
8Zhongbing L UO Jie ZHAO Junshan ZHANG Lai WANG.Tensile behavior of Sn-0.7Cu with Zn addition at various deformation temperatures[J].Acta Metallurgica Sinica(English Letters),2011,24(2):155-160.
9W.Blum,J.Dvorak,P.Kral,P.Eisenlohr,V.Sklenicka.Effects of Grain Refinement by ECAP on the Deformation Resistance of Al Interpreted in Terms of Boundary-Mediated Processes[J].Journal of Materials Science & Technology,2016,32(12):1309-1320.
10J.H.Liu 1) and S.H.Jiang 1) and M.Yao 2) 1) Department of mechanical Engineering, Engineering college, Yangzhou University, Yangzhou 225009, China 2) Department of Material Science, Yanshan University, Qinhuangdao 066000, China.INFLUENCE OF TOP- TEMPERATURE OF THERMAL CYCLE ON THERMAL STRESS/STRAIN AND THERMAL FATIGUE BEHAVIOR OF PURE IRON[J].Acta Metallurgica Sinica(English Letters),1999,12(5):852-855.

Journal of Iron and Steel Research International

2013年第10期

浏览历史

内容加载中请稍等...

Dynamic Recrystallization Behavior and Microstructure Evolution of AISI 304N Stainless Steel 被引量：11

参考文献24

同被引文献63

引证文献11

二级引证文献47

相关作者

相关机构

相关主题

浏览历史