期刊文献+

焊接接头力学性能不均匀性对管道裂纹断裂参量的影响分析 被引量:7

Effect of welded mechanical heterogeneity on fracture parameters of pipeline cracks
在线阅读 下载PDF
导出
摘要 以含半椭圆形裂纹的管道焊接接头为研究对象,利用ABAQUS软件实现了焊接接头材料属性的连续性,并在此基础之上模拟计算了焊接接头力学性能不均匀性对不同位置裂纹的应力应变场和J积分的影响。研究结果表明,半椭圆形裂纹中点处的应力应变值和J积分都是最大的,越靠近裂纹表面,其应力应变值越小。位于BM和HAZ的分界处的裂纹最容易开裂,位于WM和HAZ的分界处的裂纹起裂后裂纹倾向于进入焊缝金属。 Based on a numerical simulated approach of the uniform change of material mechanical prop- erty, the effect of the welded mechanical heterogeneity on the stress-strain fields and J-integral along a three dimension crack are simulated and analyzed by using a semi-elliptical crack in welded joints of pipeline in this paper. The results show that the maximal strain and stress and J-integral are located at the middle of the semi-elliptical cracks, and the crack is more susceptible to propagate at the boundaries of base metal and heat affect zone, and the propagating tending direction of the crack on the boundaries of weld metal and heat affect zone is the weld metal.
出处 《西安科技大学学报》 CAS 2013年第2期211-215,共5页 Journal of Xi’an University of Science and Technology
基金 国家自然科学基金(11072191)
关键词 焊接接头 力学性能不均匀性 应力应变场 J积分 welded joint mechanical heterogeneity stress and strain field J-integral
作者简介 通讯作者:龚晓燕(1966-),女,甘肃临洮人,教授,主要从事煤矿通风安全预测与评价方面研究.
  • 相关文献

参考文献7

二级参考文献23

  • 1朱亮,陈剑虹.热影响区软化焊接接头应力分布特征及强度预测[J].焊接学报,2004,25(3):48-51. 被引量:16
  • 2V.库默 周港范等(译).弹塑性断裂分析工程方法[M].北京:国防工业出版社,1985..
  • 3范瑞祥.宏观力学非均质焊接头的断裂行为研究[M].哈尔滨工业大学,1991..
  • 4马维甸.J积分在非均质焊接接头弹塑性断裂研究中的应用[J].机械工程学报,1987,23(4):43-50.
  • 5张朝晖.ANSYS11.0结构分析工程应用实例解析[M].北京:机械工业出版社,2008.
  • 6ZHANG Y M,ZHANG S B.Double-sided arc welding increases weld joint penetration[J].Welding Journal,1998,77(6):57-61.
  • 7LEI Y P,SHI Y W,MURAKAWA H,et al.The effect of mechanical heterogeneity and limit load of a weld joint with longitudinal weld crack on the J-integral and failure assessment curve[J].Int.J.of Pressure Vessels and Pi-ping,1998,75(8):625-632.
  • 8LEI Y,AINSWORTH R A.A J-integral estimation method for cracks in welds with mismatched mechanical pro-perties[J].Int.J.of Pressure Vessels and Piping,1997,70(3):237-245.
  • 9布赖恩匹克林F.钢的组织与性能[M].北京:科学出版社,1999.278-281.
  • 10Joch J, Ainsworth R A, Hyde T H. Limit load and Jestimates for idealized problem of deeply cracked welding joints in plane strain bending and tension [ J ]. Fatigue Fract.engng.Mater.struct, 1993, 16 (10): 1061~1097.

共引文献71

同被引文献52

引证文献7

二级引证文献28

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部