期刊文献+

毫米波空空弹紧缩场式目标角位置模拟技术 被引量:2

Study on Compact Field Target Angle Location Simulator for MMW Air-to-Air Missile
在线阅读 下载PDF
导出
摘要 介绍了毫米波紧缩场目标角位置模拟技术,以及它在空空弹制导与控制半实物仿真系统中的应用,分析了模拟器研制中反射面和馈源设计等关键技术的解决方法,具体介绍了Ka波段目标模拟器的研制。同时就紧缩场在五轴转台内应用遇到的实际问题进行了分析。利用该模拟器已经实现了Ka波段导弹制导与控制系统半实物仿真试验。 A compact field millimeter wave target angle position simulation technology was introduced, its application in air-to-air missile guidance and control hardware-in-the-loop simulation, and resolutions of key problems such as parabolic reflector optimization design and source feed design were analyzed. A Ka-band compact field simulator was produced. Some practices in integrating with 5-axis turntable were discussed. The simulator has applied to the guidance and control HWIL simulation of Ka-band missile.
出处 《微波学报》 CSCD 北大核心 2013年第1期14-17,29,共5页 Journal of Microwaves
关键词 紧缩场 目标角位置模拟器 半实物仿真 抛物面反射器 馈源 compact field, target's angle location simulator, hardware-in-the-loop simulation( HWIL), parabolic re-flector, feed source
作者简介 吴自禄 男,1981年生,工程师。主要从事射频制导与控制系统半实物仿真技术研究。E—mail:1uis2008@126.com 张兴利 男,1979年生,工程师。主要从事射频制导与控制系统半实物仿真技术研究。 马逸超 男,1982年生,工程师。主要从事射频制导与控制系统半实物仿真技术研究。
  • 相关文献

参考文献4

  • 1庄钊文;袁乃昌.雷达散射截面测量-紧凑场理论与技术[M]长沙:国防科技大学出版社,2000.
  • 2林昌禄.天线工程手册[M]北京:电子工业出版社,2002.
  • 3王善进,张莉,杨鸿生.圆形槽波导-波纹圆形槽波导模式变换器的仿真设计[J].微波学报,2010,26(2):70-73. 被引量:2
  • 4熊继衮;蔡澜.防空导弹制导雷达天馈系统与微波器件[M]北京:宇航出版社,1994.

二级参考文献14

  • 1严红辉,圆形波纹槽波导传输和辐射特性的研究[D].南京:东南大学,1999.
  • 2Daniele V G, Montrosset I, Zich R S. Wiener-Hopf solution for the junction between a smooth and a corrugated cylindrical waveguide[J]. Radio Sci, 1979,14(6) :943- 955.
  • 3James G L. Analysis and design of TE11-to-HE11 corrugated cylindrical waveguide mode converters [ J ]. IEEE Trans Microwave Theory Tech, 1981,29(10) :1059-1066.
  • 4James G L. TE11-to-HE11 mode convers for small-angle corrugated horns [ J ]. IEEE Trans Antennas Propag, 1982 ,30(4) : 1057-1062.
  • 5Kadri P P, et al. Accurate and efficient numerical method for the analysis -of mnltimode waveguide discontinuities [J]. IEEE Trans Microwave Theory Tech, 2000,48(2) : 295 -304.
  • 6Derudder B P, et al, Analysis of cylindrical waveguide discontinuities using vectorial eigenmodes and perfectly matched layers [ J ]. IEEE Trans Microwave Theory Tech, 2001,49(2) : 349-354.
  • 7Wang S J, Yang H S. Attenuation characteristics of corrugated circular groove waveguides [ J ]. International Journal of Infrared and Millimeter Waves, 2001, 22 (4) : 615-625.
  • 8Ise K, Inoue K, Koshiba M. Three-dimensional finite-element method with edge elements for electromagnetic waveguide discontinuities [ J ]. IEEE Trans Microwave Theory Tech. 1991. 39 ( 8 ) : 1289-1295.
  • 9Wexler A. Solution of waveguide discontinuities by modal analysis[ J]. IEEE Trans Microwave Theory Tech, 1967, 15(9) :508-517.
  • 10Cooper D N. Complex propagation coefficients and the step discontinuity in corrugated cylindrical waveguides [J]. Electron Lett, 1971,7(5) :135-136.

共引文献1

同被引文献17

  • 1赵希梅,郭庆鼎.永磁直线同步电动机的变增益零相位H_∞鲁棒跟踪控制[J].中国电机工程学报,2005,25(20):132-136. 被引量:28
  • 2曲永印,赵希梅,郭庆鼎.基于零相位误差跟踪控制器的轮廓误差交叉耦合控制[J].中国机械工程,2006,17(11):1135-1137. 被引量:15
  • 3赵希梅,郭庆鼎,陈冬兰.通过直线伺服鲁棒跟踪控制方法提高轮廓加工精度[J].机械工程学报,2006,42(6):166-169. 被引量:4
  • 4肖卫国,尔联洁.雷达制导半实物仿真误差分析[J].系统仿真学报,2007,19(11):2461-2463. 被引量:17
  • 5Shin D J, Ryu H S, Huh U Y. Fuzzy logic control for the contouring accuracy of XY positioning system[ C l// Proceedings of IEEE International Symposium on Industrial Electronics, Pusan: IEEE, 2001, 2: 1248-1252.
  • 6Mezouki R, Davila J A, Fridman L, et al. Backlash phenomenon observation and identification in electromechanical system [ J ]. Control Engineering Practice, 2007,15 (4) :447-457.
  • 7Su K H, Cheng M Y. Contouring accuracy improvement using cross-coupled control and position error compensator[ J~. International Journal of Machine Tools and Manufacture, 2008,48(12-13) : 1444-1453.
  • 8Narendra K S, Mukhopadhyay S. Intelligent control using neural networks [ J ]. Control Systems, IEEE, 1992,12(2) : 11-18.
  • 9Koren Y. Cross-coupled biaxial computer control for manufacturing systems [ J ]. Journal of Dynamic Systems, Measurement, and Control, 1980,102(4) :265-272.
  • 10Koren Y, Lo C C. Variable-gain cross-coupling controller for contouring [ J ]. CIRP Annals-Manufacturing Technology, 1991,40( 1 ) :371-374.

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部