摘要
根据鹤岗富力矿含中位厚夹矸煤层地质条件及煤的赋存状况,应用RFPA2D数值模拟软件分别对-450南18-2工作面含0.5、1.0、1.5 m厚夹矸开采煤体的运移情况进行数值模拟。结果表明,采动过程中,上部顶煤垂直方向的位移量均大于下部,而下部顶煤始动点距工作面的距离均大于上部。夹矸层强度与煤层强度既定情况下,工作面顶煤的运移规律及破碎程度均与含夹矸层的厚度相关。含1.0 m厚夹矸顶煤总位移量大于含0.5、1.5 m厚夹矸顶煤总位移量;含1.0 m厚夹矸顶煤比含0.5、1.5 m厚夹矸顶煤破碎充分。该研究为含夹矸条件下厚煤层综放开采冒放工艺的确定提供了依据。
This paper builds on thick coal seam of geological conditions and occurrence status of Fuli coal mine in Hegang and describes the use of RFPA^2D numerical simulation software to simulate the mov- ing regularity of -450 south 18 -2 working face, with different gangue thickness 0.5, 1.0, 1.5 m re- spectively. The results show that the upper top coal has larger vertical displacement than the lower in mining process, and the starting point of the lower top coal is more distant than that of the upper top coal from working face. With certain strength of gangue and coal seam, top coal in the working face shows the moving regularity and the degree of crushing, depending on gangue thickness, the top coal with 1.0 m gangue thickness gives a greater displacement and better crushing than that with 0. 5 m or 1.5 m. The re- search could provide a better basis for the caving process of thick coal seam with gangue in fully mecha- nized top coal caving.
出处
《黑龙江科技学院学报》
CAS
2012年第5期456-460,共5页
Journal of Heilongjiang Institute of Science and Technology
基金
黑龙江省教育厅科学技术研究项目(12511482)
关键词
含夹矸厚煤层
综放开采
顶煤运移规律
数值模拟
thick coal seam with gangue
fully mechanized top coal caving
movement regularity oftop coal
numerical simulation
作者简介
第一作者简介：陈海波（1972-），男，黑龙江省五大连池人，副教授，硕士，研究方向：放顶煤开采，E-mail：chenhaib08@163．com。
