摘要
采用相场模型模拟了烧结后期陶瓷微观组织演化过程。在二维模拟系统中分别设置不同大小、含量以及数量的气孔,分析了气孔的脱钩现象,研究了烧结后期气孔对陶瓷晶粒生长动力学的影响规律。模拟结果表明,陶瓷晶粒尺寸与气孔率和气孔数量成反比,与气孔尺寸成正比。
We use the phase field model to describe the microstructural evolution during the final stage of sintering.Sections 1 and 2 of the full paper explain the phase field model mentioned in the title.Section 1 presents the phase field model;Fig.1 in section 1 gives the schematic diagram for obtaining the order parameters across the grain boundaries and the pores.Section 2 presents the initial conditions for the simulation,which are given in Table 1;Fig.2 shows the discretized shape of a pore for simulation;Fig.3 shows the morphology of the initial microstructure of the sintering ceramics.Section 3 discusses the simulation results;their core consists of：（1） we set the parameters,different pore sizes and numbers of pores in a 2D simulation system;（2） we observe the entrapment of pores inside grains;（3） we analyze the effects of the pore of ceramics on grain growth kinetics during the final stage of sintering;（4） the simulation results,given in Figs.4 and 6,and their analysis show preliminarily that the grain size is proportional to the pore size and the number of pores and inversely proportional to the porosity rate.
出处
《西北工业大学学报》
EI
CAS
CSCD
北大核心
2012年第2期234-238,共5页
Journal of Northwestern Polytechnical University
基金
航空科学基金(09G53063)
西北工业大学基础研究基金(G9KY101902)资助
关键词
相场法
烧结
气孔
晶界
analysis
ceramic materials
effects
grain boundaries
grain growth
initial value problems
microstructure
models
numerical methods
porosity
scanning electron microscopy
simulation
sintering
phase field model
pore size
作者简介
刘亮亮（1985-），西北工业大学博士研究生，主要从事功能材料研究。
