摘要
设计了一种适用于油菜一器多行排种的离心式排种器,分析了离心式油菜排种器的工作原理,确定了排种器的主要结构和性能参数。研究了排种器锥筒转速与排量、各行排量一致性、总排量稳定性、破碎率等的关系;正交试验表明,在排种器锥筒转速为150 r/min、出种孔直径为3.2 mm、出种孔倾角为15°时,单行播量稳定性变异系数最小,为2.38%,播种均匀性变异系数为18.2%。
A centrifugal metering device was designed for rapeseed.Working principle of the centrifugal metering device was analyzed,and its main structural and performance parameters were investigated.The relationship among rotation speed with the delivery capacity,coefficient of variation,stability of total displacement and damage rate was concluded through the captive test of seeding device.The experimental results showed that the rotating speed was 150r/min,the diameter of discharge holes was 3.2mm,the tilt angle of discharge holes was 15°,the delivery coefficient of variation was 2.38% and performance test of the device on the rack demonstrated that seeding uniformity coefficient of variation was 18.2%.
出处
《农业机械学报》
EI
CAS
CSCD
北大核心
2012年第2期48-51,95,共5页
Transactions of the Chinese Society for Agricultural Machinery
基金
高等学校博士学科点专项科研基金资助项目(20090146110016)
国家油菜产业技术体系专项资助项目(CARS-13)
中央高校基本科研业务费资助项目(2011PY021)
关键词
油菜
排种器
离心式
Rapeseed
Metering device
Centrifugal
作者简介
作者简介：廖庆喜，教授，博士生导师，主要从事油菜播种机械和高粗茎秆作物收获机械研究，E-mail：liaoqx@mail.hzau.edu．cn
