期刊文献+

土壤直剪试验的动力学仿真 被引量:31

Dynamics Simulation of Direct Shear Test
在线阅读 下载PDF
导出
摘要 采用ANSYS/LS DYNA仿真软件,利用Lagrange和SPH相结合的方法及修正的Mohr Coulomb屈服准则,建立土壤直剪系统可视化仿真模型,进行4种土壤直剪动力学仿真试验,通过回归分析建立了土壤剪切强度与剪切速度的数学模型,研究了土壤剪切破坏过程及剪切速度对剪切强度的影响规律及机理。结果表明,土壤剪切速度大,剪切强度大,剪切模量小时,剪切强度与剪切速度呈三次方关系,剪切模量大时,剪切强度与剪切速度成对数关系;土壤剪切模量对剪切强度影响大,剪切模量大,剪切强度大。 The direct shear system dynamics simulation model was developed on the basis of the modified MohrCoulomb yield criterion by using ANSYS/LSDYNA and a combination of Lagrange and smoothed particle hydrodynamics(SPH).The dynamics simulation experiments of direct shear on four kinds of soil have been carried out.The mathematic models of soil shear strength and shearing speed were established by regression analysis.The research on soil shear failure process and the influence law and mechanism of shearing speed on shear strength was done.The results showed that with shearing speed increasing,shear strength increased.Third-order relationship exits between shear strength and shearing speed with small shear modulus.Logarithm relationship exits between shear strength and shearing speed with large shear modulus.The effect of shear modulus on shear strength is large.The large shear strength is with large shear modulus.
出处 《农业机械学报》 EI CAS CSCD 北大核心 2011年第7期96-101,共6页 Transactions of the Chinese Society for Agricultural Machinery
基金 国家自然科学基金资助项目(51065003) 广西科技创新能力与条件建设项目(0900705S015)
关键词 土壤 直剪 剪切强度 剪切速度 机理 动力学仿真 Soil Direct shear Shear strength Shearing speed Mechanism Dynamics simulation
作者简介 杨望,博士生,主要从事甘蔗和木薯收获机械动力学仿真及性能优化研究,E-mail:yanghope@163.com 通讯作者:杨坚,教授,主要从事农业机械设计及性能优化研究,E-mail:yangokok@gxu.edu.cn
  • 相关文献

参考文献11

  • 1姬长英,潘君拯.湿软土壤剪切应力—剪切速度—时间关系及其应用(第1报)——湿软土壤剪切变形机理探析[J].农业工程学报,1994,10(4):20-25. 被引量:7
  • 2Blunden B G, McLachlan C B, Kirby J M. A high-speed shear box machine [ J ]. Journal of Agricultural Engineering Research, 1993, 56 (1):81 -87.
  • 3Wheeler P N, Godwin R J. Soil dynamics of single and multiple tines at speeds up to 20 kin/h[J]. Journal of Agricultural Engineering Research, 1996,63 ( 3 ) : 243 - 250.
  • 4Onwualu A P, Watts K C. Draught and vertical forces obtained from dynamic soil cutting by plane tillage tools [ J]. Soil & Tillage Research, 1998, 48 (4) : 239 - 253.
  • 5Mootaz Abo-Elnor, Hamilton R, Boyle J T. 3D dynamic analysis of soil-tool interaction using the finite element method [ J]. Journal of Terramechanics, 2003, 40 ( 1 ) :51 - 62.
  • 6Karmakar S, Ashrafizadeh S R, Kushwaha R L. Experimental validation of computational fluid dynamics modeling for narrow tillage tool draft[ J]. Journal of Terramechanics, 2009, 46(5) : 277 - 283.
  • 7Lewis B A. Manual for LS-DYNA soil material model 147 [ R]. Department of Transportation: Federal Highway Administration, U. S. A. , 2004.
  • 8丁峻宏,金先龙,郭毅之,汤华,杨洪杰.土壤切削大变形的三维数值仿真[J].农业机械学报,2007,38(4):118-121. 被引量:38
  • 9马爱丽,廖庆喜,田波平,黄海东,舒彩霞,周善鑫,林新.基于ANSYS/LS_DYNA的螺旋刀具土壤切削的数值模拟[J].华中农业大学学报,2009,28(2):248-252. 被引量:28
  • 10周明,张国忠,许绮川,夏俊芳.土壤直角切削的有限元仿真[J].华中农业大学学报,2009,28(4):491-494. 被引量:16

二级参考文献35

  • 1徐中华,王建华.有限元法分析土壤切削问题的研究进展[J].农业机械学报,2005,36(1):134-137. 被引量:54
  • 2吕正泮.降低立式螺旋开沟机功率消耗的途径[J].农业机械学报,1994,25(2):78-83. 被引量:12
  • 3丁峻宏,金先龙,郭毅之,汤华,杨洪杰.土壤切削大变形的三维数值仿真[J].农业机械学报,2007,38(4):118-121. 被引量:38
  • 4ARRAYA K, GAO R. A non-linear three-dimensional finite element analysis of subsoiler cutting with pressurized air injection[J]. Agile Ergng Res,1995,61(2):115-128.
  • 5MOUAZEN A M,NEMENYI M. Tillage tool design by the finite element method: Part 1. finite element modeling of soil plastic behaviour[J]. Agrie Engng Res, 1999,72 (1) : 37-51.
  • 6KUSHWAHA R L, SHEN J. Finite element analysis of the dynamic interaction between soil and tillage tool[J]. Transactions of the ASAE, 1995,38(5) : 1315-1319.
  • 7ROSA U A, WULFSOHN D. Constitutive model for high speed tillage using narrow tools[J]. Terra Mechanics, 1999,36 (4) : 221-234.
  • 8MOUAZEN A M,NEMENYI M.Tillage tool design by the finite element method:Part 1.finite element modelling of soil plastic behaviour[J].Agric Engng Res,1999,72(1):37-51.
  • 9WEGNER J L,YAO M M,ZHANG X.Dynamic wave-soilstructure interaction analysis in the time domain[J].Computers and St ructures,2005,83:2206-2214.
  • 10ONATE E,ROJEK J.Combination of discrete element and finite element methods for dynamic analysis of geomechanics problems[J].Computer Methods in Applied Mechanics and Engineering,2004,193:3087-3128.

共引文献91

同被引文献313

引证文献31

二级引证文献193

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部