期刊文献+

天然气水合物准三维地震勘探电缆动态定位精度研究 被引量:9

Investigation on Streamer Dynamic Positioning Precision on Gas-Hydrate Semi-Three Dimension Seismic Survey
在线阅读 下载PDF
导出
摘要 在我国某海域对天然气水合物研究过程中,使用了单源单缆准三维地震勘探方法,获得了较好的天然气水合物矿体三维成像效果。影响天然气水合物矿体三维成像的因素很多,其中,电缆动态定位精度是最直接的影响因素之一。在大量试验数据的基础上,研究了罗盘对电缆动态定位精度的影响,研究结果与海试资料及国内外资料非常吻合,这对天然气水合物准三维调查具有一定的指导意义。根据该研究结果,在保证一定定位误差的前提下,最终确定了电缆的排列长度为2400 m(192道),获得了较高的动态定位精度。2007年在该海域实施了钻探,国内首次发现了水合物样品。钻探结果与地震资料的吻合证实了准三维地震方法定位精度已达到较高的程度。 During the gas-hydrate investigation on the some China Sea, the method named "single source Single streamer semi-three dimension seismic survey" was used to get a satisfying 3D imaging of gas-hydrate mineral body. There are many factors influence the effect of 3D imaging, and streamer dynamic positioning precision is a most important and direct one. Based on a large amount of test data, the authors discussed the influence of compasses on the streamer dynamic positioning precision. And the results were accorded well with sea test data and domestic and overseas seismic data. This will provide a guiding significance for gas-hydrate semi three dimension seismic survey. According to the result, and with a certainpositioning error, the authors confirmed that a streamer array length of 2 400 meters (192 channels) could achieve higher dynamic positioning precision. From the drilling in this area in 2007, the gas-hydrate sample was first found in China. The accordant result of drilling with the seismic data confirmed that the positioning precision had reached a higher level on semi-three dimension seismic survey.
出处 《吉林大学学报(地球科学版)》 EI CAS CSCD 北大核心 2009年第5期936-941,共6页 Journal of Jilin University:Earth Science Edition
基金 国家'863'计划项目(2006AA09A202-01)
关键词 准三维地震 动态定位精度 网络三节点法 罗盘定位精度 电缆羽角 semi three dimension seismic dynamic positioning precision network three-nodes method compass positioning precision streamer feather
作者简介 赵庆献(1971-),男。山东郓城人,高级工程师,主要从事石油和天然气水合物的地球物理勘探研究,Email:zhqx@hydz.cn。
  • 相关文献

参考文献12

  • 1张光学.《天然气水合物地震识别技术》课题研究报告[R].广州:广州海洋地质调查局,2005.
  • 2凌云,吴琳,陈波,林吉祥.宽/窄方位角勘探实例分析与评价(二)[J].石油地球物理勘探,2005,40(4):423-427. 被引量:40
  • 3张光学,耿建华,刘学伟.天然气水合物地震识别技术[R].广州:广州海洋地质调查局,2005:1-3.
  • 4曹占全,杨思勤.多源多缆震源电缆定位传感器配置方法[C].//中国海洋石油“三新、三化”优秀论文集.1999.
  • 5高祁,刘玉班,刘峰,等.勘探监督手册:物探分册[M].修订版.北京:石油工业出版社,2002.
  • 6阎增芳,周冀康,王照华,等.石油、天然气地震勘查技术规范[S].//中华人民共和国地质矿产部.DZ/T0180-1997.中华人民共和国地质矿产行业标准.北京:中国标准出版社,1997:1-8.
  • 7Um J, Thurber C H. A fast algorithm for two-point seismic tracing[J]. Bull Seis Soc Am,2002,77: 972 - 986.
  • 8Yan P, Zhou D, Liu Z. A crustal structure profile across the northern continental margin of the South China Sea[J]. Tectonophysics, 2004,338 : 1 - 21.
  • 9曾宝宏.多源多缆深海三维地震勘探技术[C]//中国海洋石油南海东部公司勘探开发部.中国海洋石油“三新、三化”优秀论文集.天津:中国石油学会,1997:71-75.
  • 10Cordsen A. Narrow-versus wide-azimuth land 3D seismic surveys [J]. The Leading Edge, 2002, 21 (8):764 - 770.

二级参考文献9

  • 1凌云,高军,孙德胜,吴琳.宽/窄方位角勘探实例分析与评价(一)[J].石油地球物理勘探,2005,40(3):305-308. 被引量:56
  • 2Thomsen L. Understanding seismic anisotropy in exploration and exploitation. 2002 DISC Distinguished Instructor Series, 5 : 2 - 43.
  • 3Sigernes L T W et al. Seismic fault imaging. Expanded Abstracts of 72nd SEG Mtg,2002,516-519.
  • 4Fagin S W. Solving the fault shadow problem in the Wilcox Trend of South Texas. Expanded Abstracts of 65th SEG Mtg,1995,1182-l185.
  • 5Liu Wei et al. Mitigation of uncertainty in velocity and anisotropy estimation for prestack depth imaging. Expanded Abstracts of 74th SEG Mtg,2004,2387-2390.
  • 6Williams Met al. Interpreting seismic data in the presence of azimuthal anisotropy or azimuthal anisotropy in the presence of the seismic interpretation. The Leading Edge, 2002,21 (8) : 771 - 774.
  • 7Cordsen A. Narrow-versus wide-azimuth land 3D seismic surveys. The Leading Edge, 2002, 21 (8) : 76477O.
  • 8Hall S Aet al. Fractured reservoir characterization using P-wave AVOA analysis of 3D OBC data. The Leading Edge, 2002,21(8) :777-781.
  • 9凌云研究小组.宽方位角地震勘探应用研究[J].石油地球物理勘探,2003,38(4):350-357. 被引量:91

共引文献39

同被引文献96

引证文献9

二级引证文献22

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部