期刊文献+

三级增压级试验件性能试验研究 被引量:6

Experimental investigation of the performance in a three stage booster rig
在线阅读 下载PDF
导出
摘要 本文针对大涵道比涡扇发动机增压级部件关键设计技术,对某型三级增压级试验件进行了总性能试验、级间参数测量试验、进气压力畸变试验以及声学测量试验等多项研究,深入分析了其试验数据。试验结果表明:增压级性能在全工况下达到或超过设计要求,级间匹配性能良好;综合畸变指数随着进口马赫数的增加而增加,跟均匀进气时相比,畸变时稳定工作边界向右下方偏移,喘振裕度相应减小;低转速时,增压级噪声的主要成分是叶片通过频率(BPF)及其谐波,但在低频区间上,许多离散的非BPF谐波分量也具有很大幅值,随着转速的提高,噪声频谱中的主要成分更加集中到BPF及其谐波分量上。 In order to deal with the key technology of the booster component design in the high bypass ratio engine, a series of experiments of a three stage booster rig were carried out at a single stage and multistage compressor test facility. The experimental items included overall performance, parameters of stages, inlet total pressure distortion and acoustics. Aerodynamic performance and acoustic characteristics were also analyzed in detail. The experimental results show that the performance of the booster successfully reaches the design goal. With the ascent of the inlet Mach number, the multiple distortion index increases. The stability limit of the booster is moved down due to the inlet pressure distortion, and the surge margin reduces accordingly.The main elements of the booster noise are blade passing frequency( BPF)and harmonic frequencies, but the non - BPF magnitudes of noise are also large in the low frequency segment at low speed. The main elements of noise spectrum more concentrate on the BPF and harmonic frequencies with the increase of the speed.
出处 《燃气轮机技术》 2009年第2期19-22,25,共5页 Gas Turbine Technology
基金 国家APTD计划资助项目
关键词 增压级试验件 性能 进气压力畸变 噪声 试验研究 booster rig performance inlet pressure distortion noise experimental investigation
作者简介 向宏辉(1979-),男,湖南沅陵人,工程师,在读工程硕士,主要从事压气机试验与数值模拟研究。
  • 相关文献

参考文献4

二级参考文献9

  • 1方昌德.军用涡喷/涡扇发动机和通用推进技术.迈向21世纪的航空科学技术[M].北京:航空工业出版社,1994..
  • 2王定勇.民用涡扇发动机技术.迈向21世纪的航空科学技术[M].北京:航空工业出版社,1994..
  • 3艾青.涡桨/涡轴发动机技术.迈向21世纪的航空科学技术[M].北京:航空工业出版社,1994..
  • 4李军.涡扇发动机进气总压畸变及稳定性试验研究.空军工程大学博士后学位报告[R].西安,2001..
  • 5程邦勤.[D].西安:空军工程大学,2000.
  • 6Lakshminarayana B. An Axial Flow Research Compressor Facility Designed for Measurement in Rotor Passages [J].ASME Journal of Engineering for Power, 1981,103: 58 -65.
  • 7Dring R P,Joslyn H D,Hardin L W. An Investigation of Axial Compressor Rotor Aerodynamics [J]. ASME Journal of Engineering for Power,1982,104:103- 111.
  • 8李文峰,王永生,王建华.发动机稳定性试验研究VXI总线测试系统[J].航空计测技术,2002,22(3):28-31. 被引量:3
  • 9蒋浩康,李雨春,赵全春,徐祺祥.高速多级风扇转子后流场测量[J].航空动力学报,1992,7(2):159-163. 被引量:6

共引文献116

同被引文献37

  • 1袁巍,陆亚钧,周盛,李志平.数据采集技术在叶轮机械实验中的应用[J].航空动力学报,2004,19(3):402-407. 被引量:5
  • 2袁巍,陆亚钧,周盛.高负荷风扇级的特性实验与流场分析[J].推进技术,2004,25(4):377-380. 被引量:5
  • 3顾杨,崔健,夏联,陈英.压气机带静叶优化的引气试验研究[J].燃气涡轮试验与研究,2004,17(4):15-19. 被引量:9
  • 4Wing F.Ng.The role of AVDR in linear cascade testing[J].航空动力学报,2007,22(6):933-944. 被引量:3
  • 5航空航天工业部高效节能发动机文集编委会.高效节能发动机文集:第三分册--风扇、压气机设计与试验[M].北京:航空工业出版社,1991.
  • 6Lecheler S,Schne11 R,Stubert B. Experimental and Nu- merical Investigation of the Flow in a 5-Stage Transonic Compressor Rig [R]. ASME 2001-GT-0344,2001.
  • 7Grosjean L, Hiemaux S, Vriendt O D. Vital Highly Loaded Direct Drive Turbofan Low Compressor Booster [R]. ISABE 2009,1102,2009.
  • 8Martensson H,Langer P,Johansson T,et al. Design and Performance of an Efficient High Specific Power Compressor[R]. ISABE 2009-1265,2009.
  • 9Luo J. Analysis of 3D Numerical Simulation for an Airfoil Probe in a Compressor [J]. ICCEE,2009,(2):560-562.
  • 10Lecheler S, Schnell R, Stubert B. Experimental and numerical investigation of the flow in a 5 - stage transonic compressor rig [ R ]. ASME GT2001 -0344,2001.

引证文献6

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部