摘要
Fluidized bed granulation is a process by which granules or coated particles are produced in a single piece of equipment by spraying a hinder as solution, suspension, or melt on the fluidized powder bed. Heat and mass transfer correlation useful for designing a granulator has been derived based on the equivalence of evaporation rate of the liquid to the heat transferred from hot gas to particles： （m/A）Dp^2λ/Lmf（1-εmf）（Tg-Tl）Kg=hDp/Kg.This equation is applied to data on granulation experiments by different workers to calculate Reynolds number and Nusselt number to obtain a relation between heat and mass transfer from gas to particles during granulation on a logarithmic scale from which the following empirical relation is obtained： Nu=0.0205Re^1.3876 which is comparable to Kothari＇s correlation Nu=0.03Re^1.3.By using the heat and mass transfer correlation obtained, the entry length, that is the length of granulator up to which effective heat transfer from gas to bed particles takes place, is estimated, which is also validated with experimental study. The correct estimation of entry length is useful in optimal design of a granulator.
Fluidized bed granulation is a process by which granules or coated particles are produced in a single piece of equipment by spraying a hinder as solution, suspension, or melt on the fluidized powder bed. Heat and mass transfer correlation useful for designing a granulator has been derived based on the equivalence of evaporation rate of the liquid to the heat transferred from hot gas to particles： （m/A）Dp^2λ/Lmf（1-εmf）（Tg-Tl）Kg=hDp/Kg.This equation is applied to data on granulation experiments by different workers to calculate Reynolds number and Nusselt number to obtain a relation between heat and mass transfer from gas to particles during granulation on a logarithmic scale from which the following empirical relation is obtained： Nu=0.0205Re^1.3876 which is comparable to Kothari＇s correlation Nu=0.03Re^1.3.By using the heat and mass transfer correlation obtained, the entry length, that is the length of granulator up to which effective heat transfer from gas to bed particles takes place, is estimated, which is also validated with experimental study. The correct estimation of entry length is useful in optimal design of a granulator.
作者简介
Corresponding author. Tel.： ＋91 11 26596174. E-mail address： papiya.roy@gmail.com （P. Roy）.
