期刊文献+

多轴载荷下ZL101铝合金的低周疲劳行为 被引量:4

Low cycle fatigue behavior of cast aluminum alloy ZL101 under multi-axial loading
在线阅读 下载PDF
导出
摘要 研究不同等效应变幅下ZL101铝合金在多轴比例和非比例载荷下的低周疲劳行为,并用透射电镜观察合金的疲劳行为中的位错结构。结果表明:合金在两种加载方式下均表现为循环硬化;在非比例载荷下合金表现出附加强化,但程度不明显;合金的疲劳寿命随等效应变幅的增加而降低,合金在非比例加载下的疲劳寿命低于比例加载时的疲劳寿命。对位错结构的观察表明,随等效应变幅度的提高,合金的低周疲劳位错结构从交叉位错带转化为位错胞,合金在非比例加载下更易形成位错胞结构。 Multi-axial low cycle fatigue behavior of cast aluminum alloys ZL101 at different equivalent strain ranges under proportional and non-proportional loadings were studied, the dislocation substructures of ZL 101 were observed by TEM. The results show that the aluminum alloy shows cyclic hardening both under multi-axial proportional and non-proportional loadings, while the cyclic additional hardening is shown under non-proportional loading, but the level is low. The multi-axial fatigue life decreases as the equivalent strain amplitude increases under both of multi-axial loadings. The fatigue life under non-proportional loading is less than that under proportional loading at the same equivalent strain amplitude. The deformation substructure examination reveals that with increasing equivalent strain amplitude, the dislocation structure tends to change from cross dislocation bands to dislocation cells. It is easier to form dislocation ceils under non-proportional loading.
出处 《中国有色金属学报》 EI CAS CSCD 北大核心 2007年第6期916-921,共6页 The Chinese Journal of Nonferrous Metals
基金 国家自然科学基金资助项目(50371063) 教育部新世纪优秀人才支持计划基金资助项目(NCET-05-0388) 牵引力国家重点实验室开放课题基金资助项目(TPL0501)
关键词 ZL101铝合金 多轴低周疲劳 非比例载荷 循环硬化 位错 cast aluminum alloys ZL101 multi-axial low cycle fatigue non-proportional loading cyclic hardening dislocation
作者简介 通讯作者:朱正宇,博士:电话:021-65982463;E-mail:julien_yu@hotmail.com
  • 相关文献

参考文献18

  • 1丁向群,何国求,陈成澍,张卫华.轿车用铝合金的研究应用进展[J].同济大学学报(自然科学版),2005,33(11):1504-1508. 被引量:18
  • 2Kimberley W.The light heavyweight[J].Automotive Engineer,2003,4:54-56.
  • 3Engler O,Hirsch J.Texture control by thermo-mechanical processing of AA6xxx Al-Mg-Si sheet alloys for automotive applications-a Review[J].Mater Sci Eng A,2002,40(2):249-262.
  • 4Wang Q G,Apelian D,Lados D A.Fatigue behavior of A356-T6 aluminum cast alloys-Part Ⅰ:Effect of casting defects[J].Journal of Light Metals,2001,1:73-84.
  • 5Wang Q G,Apelian D,Lados D A.Fatigue behavior of A356-T6 aluminum cast alloys-Part Ⅱ:Effect of microstructural constituents[J].Journal of Light Metals,2001,1:85-97.
  • 6刘忠侠,宋谋胜,李继文,翁永刚,王明星,宋天福.A356合金的低周疲劳行为及塑性应变能[J].中国有色金属学报,2006,16(2):260-267. 被引量:12
  • 7Stolarz J,Madelaine-Dupuich O,Magnin T.Microstructural fators of low cycle fatigue damage in low phase Al-Si alloys[J].Mater Sci Eng A,2001,A229:275-286.
  • 8Wang Q G,Cáceres C H,Griffiths J R.Microstructural effects on the tensile and fracture behavior of aluminum casting alloys A356/357[J].Metall Mater Trans A,2003,A34:2887-2899.
  • 9Dighe M D,Gokhale A M,Horstemeyer M F.Effect of loading condition and stress state on damage evolution of silicon particles in an Al-Si-Mg-base cast alloy[J].Metall Mater Trans A,2002,A33:555-565.
  • 10Kumai S A,Han S S,Sato A.Effect of dendrite cell size and eutectic Si particle morphology on fatigue crack growth in cast and HIPed AC4CH alloys[J].Mater Trans JIM,1999,40:685-691.

二级参考文献70

  • 1姚磊江,童小燕,吕胜利.关于疲劳能量理论若干问题的讨论[J].机械强度,2004,26(z1):278-281. 被引量:10
  • 2宋谋胜,刘忠侠,李继文,宋天福,王明星,谢敬佩,翁永刚.加钛方式与钛含量对A356合金组织和性能的影响[J].中国有色金属学报,2004,14(10):1729-1735. 被引量:23
  • 3桂满昌,王殿斌,张洪.颗粒增强铝基复合材料在汽车上的应用[J].机械工程材料,1996,20(6):30-33. 被引量:44
  • 4赵鸿.铝在汽车上的应用[J].汽车工艺与材料,1997(1):19-24. 被引量:34
  • 5何国求.材料微结构对单轴及多轴非比例加载低周疲劳特性的影响(博士学位论文)[M].西南交通大学,1995..
  • 6Kliman V,Bily M.Hysteresis energy of cyclic loading[J].Mater Sci Eng A,1984,68(1):11-18.
  • 7Prasad N E,Vogt D,Bidlingmaier T,et al.High temperature,low cycle fatigue behaviour of an aluminium alloy(Al-12Si-CuMgNi)[J].Mater Sci Eng A,2000,A276(1-2):283-287.
  • 8Avalle M,Belingardi G,Cavatorta M P,et al.Casting defects and fatigue strength of a die cast aluminium alloy:a comparison between standard specimens and production components[J].International Journal of Fatigue,2002,24(1):1-9.
  • 9Buffiere J Y.Experimental study of porosity and its relation to fatigue mechanisms of model Al-Si7-Mg0.3 cast alloys[J].Mater Sci Eng A,2001,A316(1-2):115-126.
  • 10FAN Jing-hong,McDowell D L,Mark F,et al.Cyclic plasticity at porosities and inclusions in cast Al-Si alloys[J].Engineering Fracture Mechanics,2003,70(10):1281-1302.

共引文献68

同被引文献65

引证文献4

二级引证文献27

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部