摘要
用表面形貌仪,采用平行试验方法,研究FL150型风冷式粉碎机粉碎手机边框板在常温和低温2种条件下,不锈钢304刀具、高速钢(W18Cr4V)刀具、Cr12刀具3种材料刀具的磨损情况。结果表明该粉碎机主要粉碎形式是“磨”,主要磨损形式是磨料磨损,3种材料中Cr12刀具抗磨效果最好;手机边框板经过低温预冷后,刀具磨损加大。
In order to manufacuture pulverizing machine special for waste printed ciruit board and study properties of printed circuit board under cryogenic condition, and optimize the working condition, Talysurf 5P-120 surface measuring system was used to study the reamer wear of FL150 pulverizing machine with air cooling. The wear of reamers made of three kinds of material,which are stainless steel 304, high speed steel（W18Cr4V） and Cr12, under different conditions was studied. Results show that the main crashing stype of the machine is pulverizing or mill, and the dominated wear of reamers is abrasive wear, and reamers made of Cr12 are the best to resist abrasive wear. The printed circuit board for mobile become stronger at cryogenic condition, which makes reamers damage more. So as reamer wear is concerned, cryogenic condition is not good to pulverize printed circuit board.
出处
《润滑与密封》
CAS
CSCD
北大核心
2007年第2期32-35,共4页
Lubrication Engineering
基金
国家"863"资助项目(2002AA644020)
关键词
不锈钢304
高速钢
CR12
磨料磨损
低温粉碎
线路板
stainless steel 304
high speed steel
Cr12
abrasive wear
cryogenic pulverization
printed circuit board
作者简介
李金惠。男，教授，主要从事危险废物、电子废物管理与技术的研究．E-mail：jinhui@tsinghus．edu.cn．
