期刊文献+

掺杂Nb_2O_5对自生Al_2O_3强化TiAl复合材料结构的影响 被引量:2

Effect of Doping Nb_2O_5 on Microstructure of Autogeny Al_2O_3 Reinforced of TiAl Composite
在线阅读 下载PDF
导出
摘要 采用原位反应热压法制备了自生Al2O3增强TiAl间金属化合物复合材料,通过第三元素(氧化铌)掺杂的形式,对其进行强化研究。采用DTA结合XRD分析对其反应过程进行了探讨。SEM,XRD及其它测试分析显示,引入氧化铌使铝热反应生成了更高的热能,材料能够在较低的温度下烧结。同时,Nb2O5的掺入对基体相生成比例(TiAl:Ti3Al)有一定的调控作用,也使材料中的自生氧化铝成分增强,对材料结构及性能产生了较大影响。 Spontaneous Al2O3 reinforced TiAI composite was prepared by reaction synthesis with hot pressing. The effect of doping Nb2O5 on microstructure was investigated as well. Adopting DTA, XRD analysis, their reaction courses were analysed and discussed. SEM, XRD, metallography analysis and other test showed that it is niobium oxide improved aluminium thermal reaction and released much higher energy which made the composite could be sintered under lower temperature. Meanwhile, the doping of Nb2O5 has a function to control and alter the proportion of the matrix (TiAl: Ti3Al)phase, strengthen the forming of spontaneous alumina composition in the material, and produce greater influence on the microstructure.
出处 《稀有金属材料与工程》 SCIE EI CAS CSCD 北大核心 2006年第11期1744-1747,共4页 Rare Metal Materials and Engineering
基金 国家自然科学基金资助项目(50432010 0372037) 陕西科技大学创新基金(SUST-B14)
关键词 掺杂Nb2O5 自生Al2O3 TIAL复合材料 强韧化 doping Nb2O5 spontaneous alumina TiAl composite reinforcing and toughening
作者简介 王芬,女,1959年生,教授,陕西科技大学材料科学与工程学院,陕西咸阳712081,电话:0910-3579137,E-mail:wangf@sust.edu.cn
  • 相关文献

参考文献11

  • 1Powell P W, Reynolds G H. Proceedings of the 3rd International Conference on Powder Metallurgy in Aerospace[C].San diego: Defense and Demanding Application, 1993:291
  • 2Yoshihara M, Tanaka R et al. In High Temperature Ordered Intermetallicas Alloys Ⅳ[C]. Pittsburgh, P A: MRS, 1991 : 975
  • 3Zhang Yonggang(张永刚),Han Yafang(韩雅芳),Chen Guoliang(陈国良).Structural Intermetallics(金属间化合物结构材料)[M].Beijing:Defence Industry Press,2001:231
  • 4Germann L, Banerjee D et al. Intermetallics[J], 2005, 13(9):920
  • 5Zhang W J, Appel F. Materials Science and Engineering[J],2002, A329-331:649
  • 6Liu Z C, Lin J P, Li S J et al. Intermetallics[J], 2002, 10:653
  • 7李书江,王艳丽,林均品,林志,陈国良.高铌钛铝合金的制备工艺[J].航空材料学报,2004,24(1):12-16. 被引量:16
  • 8Tuo Xiangmeng, Li Nan. Rear Materials[J], 1999, 18(2): 149
  • 9孔凡涛,陈子勇,田竞,陈玉勇.提高TiAl基合金室温塑性的方法[J].稀有金属材料与工程,2003,32(2):81-86. 被引量:61
  • 10王志,许坤,候宪钦,沈强.Nb对Ti/Al_2O_3界面微观结构与显微硬度的影响[J].济南大学学报(自然科学版),2003,17(4):305-308. 被引量:10

二级参考文献27

  • 1Liu Yong(刘咏)et al.Rare Metal Materials and Engineering(稀有金属材料与工程)[J],2000,29(4):251-254.
  • 2Fu Lianfeng(付连峰)et al.Rare Metal Materials and En gineering(稀有金属材料与工程)[J],2001,30(6):178-182.
  • 3YAMAGUCHI M, INUI H. TiA1 compounds for structural applications[A]. Darolia R. Liu C T Martin P L, et al. Structural Intermetallics, TMS , 1993: 127 142.
  • 4KIM Y W . Microstructual evolution and mechanical properties of a forged gamma titanium aluminide alloy[J]. Acta Metall Mater , 1992 , 40 : 1121 - 1134.
  • 5KIM Y W. Ordered intermetallic alloys , Part Ⅲ:Gamma Titanium Aluminides[J]. JOM , 1994 , 7 :30 - 39.
  • 6KIM Y W. Effects of microstructue on the deformation and fracture of γ-TiAl Alloys [J]. Mater Sci Eng ,1995,A192/193 : 519-533.
  • 7KIM Y W, DIMIDUK D. Designing gamma TiA1 alloys : Fundamentals , Strategy and Production [A].NATHAL M V, DAROLIA R, LIU C T, et al.Structural Intermetallies[M]. TMS, Warrendale PA,1997:531 - 544.
  • 8SEMIATIN S L. Wrought processing of ingot-metallurgy Gamma Titanium Aluminide alloys[A]. KIM Y W, WAGNER, YAMAGUCHI M. Gamma Titanium Aluminides[M]. TMS, 1995 : 509.
  • 9CHEN G L, ZHANG W, WANG Y, et al. Ti-AI-Nb intermetallic alloys based on the ternary intermetallic compound[A]. DAROLIA R, LIU C T, MARTIN P L,et al. Structural Intermetallics [ M ]. TMS, Warrendale PA, 1993. 319 - 324.
  • 10CHEN Guo-liang , ZHANG Wei-jun , LIU Zi-cheng,et al. Microstructure and properties of high-Nb containig TiAl-based alloys[A]. TMS. Gamma Titanium Aluminides Ⅱ, ISGTA' 99[C]. San Diego ,28 Feb-4 Mar ,1999. 371 - 380.

共引文献88

同被引文献115

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部