Microstructure,Properties and Heat Treatment Process of Powder Metallurgy Superalloy FGH95 被引量：27

Microstructure,Properties and Heat Treatment Process of Powder Metallurgy Superalloy FGH95

在线阅读下载PDF

导出

摘要 Microstructure and properties of nickel based powder metallurgy （PM） superalloy were presented. Effects of nonmetallic inclusions and heat treatment on microstructure and properties were. discussed. Development tendency of microstructure and properties of PM superalloy was presented. Microstructure and properties of nickel based powder metallurgy （PM） superalloy were presented. Effects of nonmetallic inclusions and heat treatment on microstructure and properties were. discussed. Development tendency of microstructure and properties of PM superalloy was presented.

作者 GUO Wei-min WU Jian-tao ZHANG Feng-ge ZHAO Ming-han

机构地区 High Temperature Materials Research Institute

出处《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2006年第5期65-68,共4页

基金 Item Sponsored by National Natural Science Foundation of China (50371017)

关键词 MICROSTRUCTURE PROPERTY PM superalloy heat treatment microstructure property PM superalloy heat treatment

分类号 TG132.32 [一般工业技术—材料科学与工程] TF125 [冶金工程—粉末冶金]

作者简介 GUO Wei-min（1965-）, Male, Doctor, Professor; E-mail： imguowm@sina. com;

引文网络
相关文献

同被引文献236

1邹金文,汪武祥.粉末高温合金研究进展与应用[J].航空材料学报,2006,26(3):244-250. 被引量：112
2张国庆,李周,田世藩,颜鸣皋.喷射成形高温合金及其制备技术[J].航空材料学报,2006,26(3):258-264. 被引量：21
3刘洋,田素贵,周晓明,赵忠刚,包宪宇,汪武祥.FGH95粉末镍基合金的组织结构与蠕变特征[J].材料工程,2007,35(z1):27-32. 被引量：7
4张义文,张凤戈,张莹,陶宇.一种消除粉末高温合金中PPB的方法[J].钢铁研究学报,2003,15(z1):513-518. 被引量：10
5邹金文,郭淑平.热处理对FGH95合金组织的影响[J].钢铁研究学报,2003,15(z1):528-532. 被引量：5
6李远士,牛焱,吴维,付广艳.Effect of grain size reduction on high temperature oxidation of binary two-phase alloys[J].中国有色金属学会会刊：英文版,2001,11(5):644-648. 被引量：5
7Guo, Qingmiao, Li, Defu, Peng, Haijian, Guo, Shengli, Hu, Jie, Du, Peng.Nucleation mechanisms of dynamic recrystallization in Inconel 625 superalloy deformed with different strain rates[J].Rare Metals,2012,31(3):215-220. 被引量：8
8王旭青,罗学军.复杂形状FGH95粉末盘形件固溶处理组织及性能研究[J].材料工程,2009,37(S1):61-63. 被引量：6
9胡本芙,陈焕铭,金开生,李慧英.FGH95高温合金的静态再结晶机制[J].中国有色金属学报,2004,14(6):901-906. 被引量：19
10张义文,上官永恒.粉末高温合金的研究与发展[J].粉末冶金工业,2004,14(6):30-43. 被引量：77

引证文献27

1田素贵,刘洋,赵忠刚,包宪宇.FGH95粉末镍基合金热处理后的微观组织与蠕变性能[J].航空材料学报,2009,29(6):33-37. 被引量：7
2NING Yongquan,YAO Zekun,GUO Hongzhen,TAO Yu,ZHANG Yiwen.Effect of Multiple Forging on Microstructure and Mechanical Properties of Powder Metallurgy FGH4096 Superalloy[J].Chinese Journal of Mechanical Engineering,2009,22(6):925-929. 被引量：6
3赵军普,陶宇,袁守谦,贾建,韩寿波.粉末冶金高温合金中的原始颗粒边界(PPB)问题[J].粉末冶金工业,2010,20(4):43-49. 被引量：32
4田素贵,谢君,周晓明,钱本江,伦建伟,于丽丽,汪武祥.固溶温度对FGH95合金组织和持久性能的影响[J].材料热处理学报,2010,31(11):122-127. 被引量：5
5黄炎,王磊,刘杨,付顺明,吴剑涛,燕平.Microstructure evolution of a new directionally solidified Ni-based superalloy after long-term aging at 950 ℃ upto 1 000 h[J].Transactions of Nonferrous Metals Society of China,2011,21(10):2199-2204. 被引量：3
6王晓峰,周晓明,穆松林,邹金文.高温合金熔炼工艺讨论[J].材料导报,2012,26(7):108-113. 被引量：24
7舒琴,葛昌纯,徐轶.喷射成形FGH95环坯的组织和性能[J].粉末冶金技术,2012,30(3):200-205.
8陆波,王旭青,丁建雄,汪武祥.粉末冶金构件疲劳裂纹的扩展寿命[J].钢铁研究学报,2012,24(8):48-52. 被引量：1
9杜劲,刘战强,张入仁,苏国胜.镍基高温合金高速铣削加工表面完整性[J].中南大学学报（自然科学版）,2012,43(7):2593-2600. 被引量：14
10梁燕,贾磊,张晓峰.高致密度Fe-Cr合金的粉末冶金制备工艺研究[J].铸造技术,2012,33(9):1039-1042. 被引量：5

二级引证文献184

1赵满圆,闫晓东,贺金宇,狄崇庆,叶蔚.GH4169双层管填充绕弯畸变的数值模拟研究[J].稀有金属,2023,47(7):967-976. 被引量：2
2田宁,赵国旗,潘玲,张顺科,杨娜,张卫华.定向凝固镍基高温合金的组织结构与中温蠕变行为[J].特种铸造及有色合金,2022,42(7):810-813. 被引量：3
3詹洪飞,黄凯,宋伟伟,唐超,安腾,史维生.冷却速度对GH4710合金凝固过程偏析行为的影响[J].热加工工艺,2020,0(1):37-40.
4郭青苗,李德富,郭胜利,吾志岗,彭海健,胡捷.GH625合金热变形过程的动态再结晶行为研究[J].机械工程学报,2011,47(6):51-56. 被引量：21
5宁永权,姚泽坤,傅明旺,郭鸿镇,李辉,谢兴华.基于热加工图研究粉末高温合金的热变形行为[J].稀有金属材料与工程,2010,39(A01):231-234. 被引量：2
6郭青苗,李德富,彭海健,郭胜利,吾志岗,胡捷,杜鹏.应变速率对GH625合金热变形过程组织演变的影响[J].北京科技大学学报,2011,33(5):587-592. 被引量：5
7谢君,田素贵,周晓明,钱本江,于莉丽,汪武祥.热等静压温度对FGH95合金组织和持久性能的影响[J].中国有色金属学报,2011,21(8):1834-1840. 被引量：6
8谢君,田素贵,周晓明,李柏松.固溶温度对粉末镍基高温合金组织与蠕变行为的影响[J].粉末冶金技术,2011,29(4):263-268. 被引量：3
9谢君,田素贵,周晓明.热等静压温度对FGH95合金组织及点阵常数的影响[J].材料热处理学报,2011,32(11):59-63. 被引量：4
10雷景富,郑勇,余俊,吕学鹏,杜娜.镍基粉末高温合金的研究进展[J].宇航材料工艺,2011,41(6):18-22. 被引量：7

1蔡刚毅,吕广庶,马壮.Effects of heat treatment process on stress corrosion cracking and microstructures of 7A05 Al alloy plate[J].中国有色金属学会会刊：英文版,2006,16(A03):1493-1498.
2YU Wei QIAN Ya-jun WU Hui-bin YANG Yue-hui.Effect of Heat Treatment Process on Properties of 1000 MPa Ultra-High Strength Steel[J].Journal of Iron and Steel Research International,2011,18(2):64-69. 被引量：17
3Pan Jiansheng, Li Yongjun, Cu Jianfeng, Hu Mingjuan Open Research Lab for High Temperature Materials & Testing, SJTU, Shanghai, 200030.Research and Application Prospect of Computer Simulation on Heat Treatment Process[J].Journal of Shanghai Jiaotong university(Science),2000,5(1):1-13. 被引量：19
4TIAN Gaofeng JIA Chengchang WEN Yin LIU Guoquan HU Benfu.Cooling γ′ precipitation behavior and strengthening in powder metallurgy su-peralloy FGH4096[J].Rare Metals,2008,27(4):410-417. 被引量：3
5YANG Ying YAN Qing-zhi MA Rong GE Chang-chun.Effect of Heat Treatment Process on Mechanical Properties and Microstructure of Modified CNS-ⅡF/M Steel[J].Journal of Iron and Steel Research International,2011,18(12):65-70.
6MAO Jian YANG Wanhong WANG Wuxiang ZOU Jinwen ZHOU Ruifa Beijing Institute of Aeronautical Materials,Beijing,China MAO Jian,senior engineer,Beijing Institute of Aeronautical Materials,Beijing 100095,China.PARTICLE BOUNDARIES AND FRACTURE OF A POWDER METALLURGY SUPERALLOY[J].Acta Metallurgica Sinica(English Letters),1993,6(5):346-351.
7Yuan-zhi Zhu,Zhe Zhu,Zhi-min Yin,Zhi-dong Xiang.Evolution of carbides and carbon content in matrix of an ultra-high carbon sintered steel during heat treatment process[J].International Journal of Minerals,Metallurgy and Materials,2009,16(3):299-303. 被引量：3
8胡春宝,许涛.Effect of RE on the Formation and Growth of Granular Carbides of Cast Semi-Steel in Heat Treatment Process[J].Journal of Rare Earths,2003,21(S1):206-209.
9Yuli GU Yuhuai HE Shiyu QU Guodong ZHANG Fei ZHENG Chunhu TAO.Thermo-mechanical fatigue behavior of nickel-base powder metallurgy superalloy FGH96 under tension-tension loading[J].Acta Metallurgica Sinica(English Letters),2010,23(2):147-153. 被引量：2
10ZHOU Min DU Lin-xiu LIU Xiang-hua.Relationship Among Microstructure and Properties and Heat Treatment Process of Ultra-High Strength X120 Pipeline Steel[J].Journal of Iron and Steel Research International,2011,18(3):59-64. 被引量：5

Journal of Iron and Steel Research International

2006年第5期

浏览历史

内容加载中请稍等...

Microstructure,Properties and Heat Treatment Process of Powder Metallurgy Superalloy FGH95 被引量：27

同被引文献236

引证文献27

二级引证文献184

相关作者

相关机构

相关主题

浏览历史