摘要
研究并比较了皇竹草Soda-AQ与KP-AQ法蒸煮制浆综合性能,得出了两种蒸煮方法主要蒸煮工艺参数用碱量A、最高温度C、保温时间T、硫化度S与浆料得率Y和卡伯价K间的回归方程。较佳蒸煮条件和结果分别为A17%、C158℃、T20min、Y49.96%、K15.2和A18%、C160℃、T30min、S15%、Y51.54%、K13.9;两种浆CEpH法均能漂至白度>82%ISO;蒸煮、漂白浆料纤维长度分布小于等于100目的>80%～85%;打浆度43、42°SR时,撕裂指数7.5、7.2mN·m2/g,耐破指数3.28、3.10kPa·m2/g,裂断长5.22、5.17km;两种蒸煮方法均较好地适用于皇竹草,但综合前者更优。
A comparison of the comprehensive performance of Soda-AQ and KP-AQ cooking and pulping of hybrid giant napier was made. The results show that： the regression equations of the major cooking technological parameters such as the alkali charge A （ Na2O in %）, the maximum temperature C （℃）, holding time T（min）, sulphidity S （%） and the pulp yield Y （%） and Kappa number K in the Soda-AQ and KPAQ cooking processes are respectively Y=-10^4.807/（A ^0.192 T^ 0.007 C ^1.305）, K=10^7. 758/（A ^1. 388 T^ 0. 088 C ^2.174） and Y=10^3.194 S ^ 0.004/ （A^ 0. 162 C ^0. 578 T^ 0.003）, K= 10^5. 985/（ S ^0. 007 A^ 0. 591 C ^1.721 T^ 0.141 ）; the preferred conditions of cooking and result were respectively A17%, C158℃, T20min, Y49.96%, K15.2 and A18%, C160℃, T30min, S15%, Y51.54%, K13.9,CEpH process can both bleach the pulp to higher than 82 %ISO in brightness; For the cooked and bleached pulp, fiber with the length distribution over 100- mesh can be more than 80%- 85%; At the beating degree of 42 and 43°SR, the tear index was 7.5, 7.2mN. m^2/g, the bursting index was 3.28, 3.10kPa. m/g, and the breaking length was 5.22, 517km; The two methods can both be applicable to hybrid giant napier but KP-AQ process is better as a whole.
出处
《中华纸业》
CAS
北大核心
2006年第7期51-54,共4页
China Pulp & Paper Industry
基金
华南理工大学制浆造纸工程国家重点实验室开放基金资助项目(编号200308)
作者简介
张辉，高级工程师，副教授，江苏省“333人才工程”培养对象；主要从事新兴造纸原料的开发利用与现代造纸机械在线诊断技术。
