期刊文献+

非球面齐明透镜的设计 被引量:5

Design of aplanatic lens with aspheric surface
在线阅读 下载PDF
导出
摘要 鉴于过去文献只对非球面消球差透镜做了分析,根据初级像差理论给出了非球面齐明透镜(同时消球差和彗差)初始结构的求解方法,包括非球面齐明单透镜和非球面齐明双透镜的求解方法;并利用Zemax光学设计软件验证了这种求解方法的正确性。通过大量的计算给出了各种关系曲线,并分析了相对口径与透镜球差的变化关系,这些分析对光学系统的设计都是有益的。 Previously only lens with aspheric surface for correcting spherical aberration was analyzed. Based on the third-order aberration theory, a method is put forward to gain initial data of the aplanatic lens (including singlet and doublet)with aspheric surface. Its validity is validated by the optical design software Zemax. Several curves are given based on lots of calculations. Curve of the relative aperture and spherical aberration is analyzed. All these analyses are beneficial to optical design.
出处 《量子电子学报》 CAS CSCD 北大核心 2006年第2期159-163,共5页 Chinese Journal of Quantum Electronics
关键词 几何光学 非球面设计 齐明透镜 像差理论 赛德系数 geometric optics aspheric design aplanatic lens aberration theory Seidel coefficients
作者简介 袁立银(1981-),女,安徽宣城人,同济大学物理系非球面光学实验室在读硕士生,主要方向为光学系统的设计、加工、检验和分析。E-mail:yly256@sohu.com
  • 相关文献

参考文献8

  • 1Sm.ith W J.Modern Optical Engineering[M].New York:McGraw Hill Book Company,2000.439-447.
  • 2光学非球面的设计、加工与检验[M].Beijing:Science Press,1994.54 (in Chinese).
  • 3郝沛明,王鹏,王占山,鲁鸿雁.高倍率及大孔径扩束器的光学系统设计[J].中国激光,2003,30(6):494-496. 被引量:24
  • 4工程光学系统设计[M].Beijing:Press of Mechanical Industry,1987.41-84 (in Chinese).
  • 5应用光学[M].Beijing:Press of Mechanical Industry,1987.520-522 (in Chinese).
  • 6郝沛明,纪玉峰,冯玉萍,查来宾,丁厚月.伽里略非球面透镜扩束器[J].量子电子学报,1997,14(4):380-384. 被引量:5
  • 7胡明勇,郝沛明,王鹏,赵文才,张海洪.非球面扩束器的设计[J].量子电子学报,2002,19(5):418-424. 被引量:9
  • 8先进光学制造技术[M].Beijing:Science Press,2001.46-47 (in Chinese).

二级参考文献14

  • 1潘君骅 郝沛明.两个二次曲面反射镜组成的光学系统的一般研究[J].天文学报,1965,13(1):46-56.
  • 2HaoPeiming.The eyepieces of aspherical surface[J].光学学报,1997,17(10):1389-1393.
  • 3Pan Junhua Hao Peiming.A general study of the opticalsystem with two aspherical mirrors .天文学报,1965,13(1):46-56.
  • 4Warren J. Smith. Modem Optical Engineering[M].New York: McGraw. Hill Book Company. 2000. 439-447, 62-72.
  • 5Editors group. Optical Design Manual [M]. Beijing..National Defence Industry Press. 1971. 217-226. 282-304 (in Chinese).
  • 6Lin Dajin. Optical Engineering System Design [M].Beijing: Mechanic Industry Press. 1987. 41 - 71 ( inChinese).
  • 7郝沛明,光学学报,1993年,11卷,10期,931页
  • 8潘君骅,天文学报,1993年,13卷,1期,46页
  • 9团体著者,光学仪器设计手册.上,1970年
  • 10王之江,光学设计理论基础,1965年,95页

共引文献30

同被引文献25

  • 1王宝.用Zemax设计非球面补偿系统[J].光学仪器,2006,28(1):39-43. 被引量:4
  • 2郝沛明,付联效,袁立银,李韦韦.反射镜补偿检验[J].光学学报,2006,26(6):831-835. 被引量:8
  • 3普里亚耶夫дг.光学非球面检验[M].北京:科学出版社,1982:114-134.
  • 4JOSEPH M G. Lens design with practical Zemax examples[M]. Virginia: Willmann-Bell Ine, 2002:85-93.
  • 5Lin Dajian.Design of Engineering Optical System (工程光学系统设计)[M].Beijing:Press of Mechanical Industry,1987.41-84.
  • 6Pan Junhua.Design,Machining and Test of Aspheric Lens (光学非球面的设计、加工与检验)[M].Beijing:Publishing Company of Science,1994.180-189.
  • 7Smith W J.Modern Optical Engineering[M].New York:McGraw Hill Book Company,2000.548.
  • 8Geary J M.Lens Design[M].Richmond:Willmann-Bell,Inc.,2002.159-165.
  • 9Smith W.J.Modern Optical Engineering[M].New York:McGraw Hill Book Company,2000.439-447.
  • 10钟兴,贾继强.空间相机消杂光设计及仿真[J].光学精密工程,2009,17(3):621-625. 被引量:28

引证文献5

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部