摘要
施工张拉控制是索穹顶结构的关键技术之一,但是现有文献描述的施工方法往往过于复杂。为了促进索穹顶结构在实际工程中的成功应用,简化其施工过程非常必要。基于机构分析原理,本文以一直径为5m的葵花型索穹顶结构模型为研究对象,考察了索穹顶结构的三种施工张拉方法:张拉最外圈斜索成形法、张拉最外圈脊索成形法及张拉最外圈环索成形法。文中对上述三种施工方法进行了详细的试验研究,并将其与理论计算结果进行了对比分析,发现试验结果和理论分析吻合较好,证明了上述三种施工张拉方法是可行的。本文的试验研究有助于对该类结构的进一步研究和工程应用。
Construction control is a key technique in cable dome design, but the methods described in the available literatures are always very complicated. For successful application of cable domes to engineering projects, it is necessary to simplify its construction process. Based on mechanism analysis of a 5m-diameter Levy type cable dome model, this paper presents three construction methods： the first method is to construct the dome by only pulling the outmost diagonal cable, the second one is to construct it by only pulling the outmost ridge cable and the last one is to construct it by only pulling the outmost hoop cable. The experiments of the three methods are all performed in more detail, and are compared with theoretical analysis results. The experimental results agree well with the theoretical analysis, which shows that all these construction methods are feasible. And the construction research provided in this paper may be of help to further research and application of cable domes.
出处
《建筑结构学报》
EI
CAS
CSCD
北大核心
2006年第1期112-116,共5页
Journal of Building Structures
基金
国家自然科学基金资助项目(50278086)
高等学校博士学科点专项科研基金资助课题(20020335036)
关键词
索穹顶结构
施工张拉
试验研究
机构分析
cable dome
construction process
experimental research
mechanism analysis
作者简介
郑君华（1978-），女，浙江台州人，博士研究生。
