期刊文献+

吸附法制备CuO/SiO_2纳米复合材料 被引量:3

Synthesis of CuO/SiO_2 nanocomposite material using adsorption method
在线阅读 下载PDF
导出
摘要 为了研究和控制CuO粒子的生长,提出了一种利用吸附相纳米反应器制备纳米粒子的新方法.在SiO2表面的吸附层反应器中得到CuO纳米粒子,由络合滴定法测定了Cu离子的吸附速度,利用XRD、TEM、EDX和溶剂置换的方法研究了反应和吸附过程的特性.结果表明,Cu离子的吸附在1 h内达到平衡,60%的Cu离子被吸附到SiO2表面.随着温度的升高,吸附层体积会减小且络合吸附作用得到加强.由于吸附层度的限制,CuO晶粒粒径会减小.反庆在吸附层内发生,随水量的增加,SiO2表面环境发生突变,Cu量迅速达到最大值并不再改变. To research and control the CuO particle growth, a novel preparation method using adsorption phase nanoreactor technique was proposed. CuO nanoparticles were synthesized in a nanoreactor formed by adsorption layer on SiO2 surface. The adsorption rate of copper ion was measured by complexo-metric titration. The characteristics of reaction and adsorption process were investigated by XRD, TEM, EDX and solvent-substituted. The results indicate that the adsorption of copper ion achieves equilibrium in less than 1 h and more than 60% copper ions are adsorbed on the SiO2 surface. The adsorption layer volume decreases and the complexation adsorption enhances with the increasing temperature. The grain size of CuO decreases owing to the limit of adsorption layer. The reaction occurs in the adsorption layer, and the copper quantity reaches the maximum rapidly and does not change with increasing water due to a saltation of SiO2 surface environment.
出处 《浙江大学学报(工学版)》 EI CAS CSCD 北大核心 2005年第12期1866-1870,共5页 Journal of Zhejiang University:Engineering Science
基金 国家自然科学基金资助项目(20476088) 浙江科技计划资助项目(2004C31057)
关键词 吸附层 纳米反应器 CuO/SiO2复合材料 温度影响 adsorption layer nanoreactor CuO/SiO2 composite material temperature effect
作者简介 李元朴(1981-),男,山东青岛人,硕士生,从事纳米粒子制备、应用研究.E—mail:sporterlee@zjuem.zju.edu.cn 通讯联系人:蒋新,男,副教授,E—mail:jiangx@zjuem.zju.edu.cn
  • 相关文献

参考文献9

二级参考文献29

共引文献147

同被引文献23

  • 1蒋新,李元朴,王挺.微尺度反应技术及其在纳米材料制备中的应用[J].硅酸盐通报,2004,23(5):61-65. 被引量:4
  • 2毛从文,蒋新.吸附法原位制备Ag/SiO_2纳米复合材料[J].复合材料学报,2006,23(4):88-94. 被引量:10
  • 3王挺,蒋新,李希.吸附相反应技术制备纳米TiO_2的反应过程[J].化学反应工程与工艺,2007,23(1):24-29. 被引量:2
  • 4葛睿,黄燕,尹鹏程,魏先文.纳米过渡金属催化剂在有机合成中的应用进展[J].有机化学,2007,27(6):724-732. 被引量:4
  • 5Staufer U, Akiyama T, Gullo M R, et al. Micro-and nanosystems for biology and medicine [ J ]. Microelectronic Engineering,2007,84 (5) :1681-1684.
  • 6Chen J S, Liu M C, Zhang L, et al. Application of nano TiO2 towards polluted water treatment combined with electro-photochemical method [ J ]. Water Research. 2003,37(16) :3815-3820.
  • 7Kiraly Z, Dekany I, Masralir A, Bartok M. In situ generation of palladium nanoparticles in smectite clays [ J ]. Journal of Catalysis, 1996,161 ( 1 ) : 401-408.
  • 8Dekany I ,Turi L. Preparation of semiconductor and transition metal nanoparticles on colloidal solid supports[ J]. Colloid and Surfaces, 1998,141 (3) :405-417.
  • 9Berger F, Dekany I. Variable thickness of the liquid sorption layers on solid surfaces [ J ]. Colloids and Surfaces A : Physicochemical and Engineering Aspects, 1998,141 ( 3 ) : 305-317.
  • 10Toth J, Berger F, Dekany I. Separation of the first adsorbed layer from others and calculation of the BET compatible surface area from type II isotherms [ J ]. Journal of Colloid and lnterface Science, 1999,212 ( 2 ) :411-418.

引证文献3

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部