摘要
在普通热轧机上利用累积叠轧焊工艺对普碳钢Q235进行了实验研究,重点研究了压下量(最大压下量98%)、循环轧制次数等工艺参数对Q235钢组织及性能的影响规律.结果表明:在普通热轧机上应用累积叠轧焊工艺对同种材料进行焊合,不仅可以获得连续、均匀的结合组织,而且使Q235钢的组织得到明显的细化,夹杂物分布更加均匀,材料的强度大幅度提高,抗拉强度达800MPa以上.
Industrial experiments of Q235 plain carbon steel by Accumulitive Roll-Bonding （ARB） process were carried out. The effects of deformation temperature, reduction （the max reduction 98%） and cyclic roling pass on the microstructure and mechanical properties of the steel were investigated. The results showed that a steel with ultrafine grains and higher mechanical properties could be obtained on a plain hot rolling mill by ARB process. It was also proved that the interracial microstructure was continuous and homogeneous because of the same material rolling.
出处
《北京科技大学学报》
EI
CAS
CSCD
北大核心
2005年第4期448-452,共5页
Journal of University of Science and Technology Beijing
基金
国家自然科学基金资助项目(No.50375019)
关键词
普碳钢
累积叠轧焊
组织细化
性能特征
plain carbon steel
accumulative roll-bonding
microstructure evolvement
mechanical properties
作者简介
许荣昌（1972-）,男,博士研究生
