摘要
在电磁搅拌作用下用A356-Zr(CO3)2组元通过熔体反应法原位合成了Al2O3、Al3Zr颗粒增强铝基复合材料,扫描电镜观察试样凝固组织发现:复合材料中内生增强颗粒粒度为1~3μm,并随着搅拌强度的增加,增强颗粒在基体中的体积分数和弥散度显著提高,原因是电磁搅拌促进了传热和传质扩散,改善了原位合成动力学条件;同时Si相形貌由片状初晶硅向针状、细棒状共晶Si转变,随搅拌强度的增加硅相变质,这是电磁搅拌和内生颗粒共同作用的结果.
(Al_2O_3+Al_3Zr)p/A356 composites were synthesized by melt-reaction in A356-Zr(CO_3) system with electromagnetic stirring.Observation of solidified microstructure by SEM show that the volume fraction and dispersity of reinforced particulate with the size of 1~3 μm in matrix can be improved with the stirring intensity increasing due to the electromagnetic stirring promoting heat transfer and solute diffusion to improve in-situ synthesized kinetics.Meanwhile,co-action of electromagnetic stirring and in-situ particulate results in the transformation of Si phase from sheet primary Si to needle-like or fine-rod eutectic Si.
出处
《特种铸造及有色合金》
CAS
CSCD
北大核心
2005年第8期502-504,共3页
Special Casting & Nonferrous Alloys
基金
国家自然科学基金资助项目(50471050)
江苏省高校自然科学基金资助项目(04BJK430022)
作者简介
李桂荣,女,1976年出生,博士研究生,江苏大学材料科学与工程学院,江苏镇江(212013),电话:0511—5814516,E—mail:whmlgr@ujs.adu.cn