期刊文献+

热处理对高钒高速钢中残余奥氏体量的影响 被引量:6

Effect of Heat Treatment on Residual Austenite of High Vanadium High Speed Steel
在线阅读 下载PDF
导出
摘要 采用铁磁性法测定了高钒高速钢中残余奥氏体量。研究了淬火温度和回火温度对高钒高速钢残余奥氏体量的影响。结果表明:淬火加热温度升高,残余奥氏体量增加;回火温度升高,残余奥氏体量降低。在试验淬火温度范围(900~1100℃)内450℃以下回火,奥氏体含量变化不明显;回火温度达到550℃时,残余奥氏体含量迅速降低。 The amount of residual austenite in high vanadium high speed steel was measured by ferromagnetism method.The effect of heat treatment technique on the amount of residual austenite was studied.The results show that the amount of residual austenite rise when the quenching temperature increase,but the amount of residual austenite decrease when the tempering temperature increase;At the quenching temperature (900~1100℃)when the tempering temperature is lower than 450℃,the amount of residual austenite has slight variation.But the amount of residual austenite sharply decreases if the tempering temperature reaches 550℃.
出处 《热加工工艺》 CSCD 北大核心 2004年第12期31-32,35,共3页 Hot Working Technology
基金 河南省重大科技攻关资助项目(0322020300)
关键词 高钒高速钢 热处理 铁磁性法 残余奥氏体 high vanadium high speed steel heat treatment ferromagnet method residual austenite
  • 相关文献

参考文献12

  • 1Sano Y,Hattori T,Haga M.Characteristics of high carbon high speed steel rolls for hot strip mill[J]. ISIJ International,1992,32(11):1194-1201.
  • 2Keun Chul Hwang, Sunghak Lee, Hui Choon Lee. Effects of alloying elements on microstructure and fracture properties of cast high speed steel rolls Part I: Microstructural analysis[J].Materials Science and Engineering,1998,A254:282-295.
  • 3Goto T ,Matsuda Y,Sakamoto K,et al. Basic characteristics and microstructure of high-carbon high speed steel rolls for hot rolling mill[J]. ISIJ International, 1992, 32(11): 1184-1189.
  • 4龙锐,魏世忠,刘亚民,倪锋,徐流杰.高钒高耐磨合金的组织与性能[J].矿山机械,2001,29(12):54-56. 被引量:32
  • 5徐流杰,魏世忠,龙锐,倪锋,刘亚民,王守成.高钒高速钢中碳化钒的形态分布研究[J].铸造,2003,52(11):1069-1073. 被引量:36
  • 6魏世忠,龙锐.高钒高耐磨合金锤头的研制及使用  [J].水泥,2001(8):31-33. 被引量:27
  • 7Kenji Ichino, Yoshihiro Kataoka,Tomoya Koseki. Development of centrifugal cast roll with high wear resistance for finishing sta-nds of hot strip mill[J].Kawasaki Steel.Technical Report,1997,37(10):13-18.
  • 8刘海峰,刘耀辉,于思荣.高碳高钒系高速钢的耐磨性研究[J].摩擦学学报,2000,20(6):401-406. 被引量:66
  • 9徐流杰,魏世忠,龙锐,王守诚.高钒高速钢的磨粒磨损行为研究[J].矿山机械,2003,31(11):77-79. 被引量:17
  • 10Kawashima, Suguru. Development of monobloc type high-carbon high-alloyed rolls for hot rolling mills[J]. ISIJ International, 1992, 32 (11):1190-1193.

二级参考文献33

共引文献120

同被引文献35

引证文献6

二级引证文献22

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部