期刊文献+

TiB_2-TiB/Fe金属陶瓷复合涂层原位合成及显微分析 被引量:42

In-situ synthesis and microanalysis of TiB_2-TiB/Fe metal-ceramics composite coating
在线阅读 下载PDF
导出
摘要 利用激光熔覆工艺在中碳钢表面制备出原位自生TiB2-TiB/Fe复相金属陶瓷复合涂层,以改善常规材料表面综合使用性能.采用XRD、SEM、EDS、EPMA等手段对复合涂层进行了研究.结果表明:复合涂层主要由(Fe,C)固溶体胞状树枝晶及分布于晶间的TiB2/Fe或TiB/Fe共晶组成,部分Fe2B相也会出现在晶间.涂层成分不同时,陶瓷增强相的含量将发生变化.涂层力学性能较基体有显著提高. In-situ synthesized TiB_2-TiB/Fe multiphase metal-ceramics composite coating has been fabricated on medium carbon steel surface by laser cladding in order to improve the comprehensive practical properties of the conventional material. Studies of composite coating were carried out by means of XRD, SEM, EDS, EPMA. Results show that the main phase in the coating is (Fe,C) solid solution dendrite with eutectic structure of TiB_2/Fe or TiB/Fe distributing in intergranular. Part of Fe_2B phase appears in intergranular too. The amount of reinforcement ceramic phase varies with chemical composition of the coating. Mechanics property of the coating increases prominently compared to the substrate.
出处 《大连理工大学学报》 EI CAS CSCD 北大核心 2004年第6期798-801,共4页 Journal of Dalian University of Technology
基金 国家自然科学基金资助项目(59701001).
关键词 金属陶瓷复合涂层 TIB2 Fe2B 激光熔覆工艺 共晶 显微分析 中碳钢 原位自生 原位合成 材料表面 metal-ceramics coating in-situ synthesis microstructure
  • 相关文献

参考文献8

  • 1SUN R L, MAO J F, YANG D Z. Microscopic morphology and distribution of TiC phase in laser clad Ni-Cr-B-Si-C/TiC layer on titanium alloy substrate [J]. Surface and Coatings Technol, 2002, 155(5): 203-207.
  • 2OUYANG J H, NOWOTNY S, RICHTER A, et al. Laser cladding of yttria partially stabilized ZrO2 (YPSZ) ceramic coatings on aluminum alloys [J]. Ceramics Int, 2001, 27(2): 15-24.
  • 3LI Y X, YAO J K, LIU Y. Synthesis and cladding of Al2O3 ceramic coatings on steel substrates by a laser controlled thermite reaction [J]. Surface and Coatings Technol, 2003,172(5): 57-64.
  • 4LIM L C. Microstructures of laser-clad Ni-base hardfacing alloys [J]. Surface and Coatings Technol, 1998, 106(3): 183-192.
  • 5KOOI B J, PEI Y T, DE HOSSON J Th M. The evolution of microstructure in a laser clad TiB-Ti composite coating [J]. Acta Mater, 2003, 51(2): 831-845.
  • 6GORSSE S, MIRACLE D B. Mechanical properties of Ti-6Al-4V/TiB composites with randomly oriented and aligned TiB reinforcements [J]. Acta Mater, 2003, 51(5): 2427-2442.
  • 7BAT B V R, SUBRAMANYAM J, PRASAD V V B. Preparation of Ti-TiB-TiC and Ti-TiB composites by in-situ reaction hot pressing [J]. Mater Sci and Eng, 2002, A325(2): 126-130.
  • 8LI Q. Study of laser cladding Ni-Cr-B-Si-C alloy coatings microstructure by TEM [J]. Chin J of Lasers, 1999,26(4): 374-377.

共引文献1

同被引文献648

引证文献42

二级引证文献445

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部