期刊文献+

基于失效模式的SRC框架-RC核心筒混合结构三水准抗震优化设计 被引量:3

Failure modes-based three-level aseismic optimal design for a SRC frame-RC core wall hybrid structure
在线阅读 下载PDF
导出
摘要 以SRC框架-RC核心筒混合结构多目标优化设计为研究背景,通过引入损伤函数,将结构的工程造价和损伤量最小定为优化目标,并根据建筑结构"三水准"抗震设防的目标要求,以及结构在不同受力阶段各类构件的受力特点,提出三水准优化设计的方法:小震作用下,认为混凝土处于开裂的临近状态,假定钢材未发挥作用,仅有混凝土发挥作用,据此对结构构件的截面尺寸与混凝土用量进行优化;在中震作用下,框架与剪力墙处于协同工作状态,据此对整个结构满足层间位移差最小之目标的钢材用量进行优化;在大震作用下,结构处于塑性状态,剪力墙基本退出工作,据此对满足结构损伤值最小之目标的钢材用量进行进一步的优化。从而将一个多目标优化问题转化为多个单目标优化问题求解。综合考虑各种约束条件,运用遗传算法与准则优化法的结合(亦即OC-GA混合算法),实施SRC框架-RC核心筒混合结构基于失效模式的三水准优化求解。通过引入一个24层SRC框架-RC核心筒混合结构的设计实例,对结构优化后的有限元模拟结果进行分析,证实了该优化设计思路是有效、可行的。 Multi-objective design of a SRC frame-RC core wall hybrid structure was taken as an example, minimizing its project cost and damage was taken as optimization objectives by introducing a damage function. According to the three-level aseismic fortification criterion, and the mechanical characteristics of the structure, a three-level aseismic fortification criterion optimization design method was presented. The optimization of the cross-section sizes of the structural components and concrete volume was actualized by assuming that only concrete works under a minor earthquake. The optimization of steel volume was performed to meet the requirement of the minimum displacement difference between two adjacent storeies under a moderate earthquake, while the frame and shear wall were in a collaborative working state. The optimization of steel volume was implemented further to meet the requirement of the minimum structural damage under a severe earthquake, while the structure was in a plastic state and the shear wall was out of work. So, a multi-objective optimization problem was converted into several single-objective optimization problems. Taking various constraints into consideration, a failure modes-based three-level aseismic optimal design of a SRC frame-RC core wall hybrid structure was actualized by using the combination of the genetic algorithm and the optimization criterion, i. e., the OC-GA algorithm. A numerical example of a 24-storey SRC frame-RC core wall structure was analyzed to verify the rationality of the proposed method.
出处 《振动与冲击》 EI CSCD 北大核心 2013年第19期44-50,共7页 Journal of Vibration and Shock
基金 国家自然科学基金项目(50978218 51108376)
关键词 SRC框架-RC核心筒混合结构 失效模式 三水准抗震设防准则 OC-GA算法 多目标优化 Concretes Earthquakes Failure modes Genetic algorithms Military engineering Multiobjective optimization Optimal systems Shape optimization Shear walls
  • 相关文献

参考文献5

二级参考文献33

共引文献40

同被引文献33

  • 1白久林,杨乐,欧进萍.基于等损伤的钢框架结构抗震性能优化[J].工程力学,2015,32(6):76-83. 被引量:12
  • 2刘霞,易伟建,沈蒲生.钢筋混凝土深梁的拓扑优化模型[J].工程力学,2006,23(9):93-97. 被引量:8
  • 3JGJ138-2001.型钢混凝土组合结构技术规程[S].2001.
  • 4GB50011-2010,建筑抗震设计规范[S].
  • 5尚晓江,邱峰.ANSYS结构有限元高级分析方法与范例应用[M].北京:中国水利水电出版社,2005.
  • 6中华人民共和国住房和城乡建设部.GB 50010-2010混凝土结构设计规范[S].北京:建筑工业出版社,2010.
  • 7Polajnar M, Drazumeric R, Kosel F. Geometry optimization of a slender cantilever beam subjected to lateral buckling [J]. Struct Multidisc Optim, 2013,47 : 809-- 819.
  • 8Liu Xia, Yi Weijian. Michelblike 2D layouts generated by genetic ESO [J]. Struct Multidisc Optim, 2010, 42 (1) :111--123.
  • 9Sauter M, Kress G, Giger M, et al. Complex-shaped beamelement and graph-based optimization of compliant mecha nisms [J]. Struct Multidisc Optim, 2008,36:429--442.
  • 10Drazumeric R, Kosel F. Shape optimization of beam due to lateral buckling problem [J]. Int J Non-Linear Meeh, 2012, 47:65--74.

引证文献3

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部