Effect of Heat Treatment on Microstructure and Mechanical Properties of HB400 Grade High Strength Abrasion Resistant Steel 被引量：6

Effect of Heat Treatment on Microstructure and Mechanical Properties of HB400 Grade High Strength Abrasion Resistant Steel

原文传递

导出

摘要 High strength abrasion resistant steel plates are widely used in mining,construction and agricultural machineries.The plates are,however,usually poor in impact toughness.An attempt is made to improve the impact toughness of HB400 grade abrasion resistant steel by controlling quenching and tempering of the plates.Optimized combination of the strength and the toughness has been achieved by choosing best fit set of quenching and tempering condition.Mechanism underlying the achievement has been investigated in terms of the microstructure consisting of tempered lath martensite,retained austenite and precipitated carbides. High strength abrasion resistant steel plates are widely used in mining,construction and agricultural machineries.The plates are,however,usually poor in impact toughness.An attempt is made to improve the impact toughness of HB400 grade abrasion resistant steel by controlling quenching and tempering of the plates.Optimized combination of the strength and the toughness has been achieved by choosing best fit set of quenching and tempering condition.Mechanism underlying the achievement has been investigated in terms of the microstructure consisting of tempered lath martensite,retained austenite and precipitated carbides.

作者 ZHEN Fan WANG Wei YANG Han CHEN Shao-hui ZHANG Xiao-bing QU Jin-bo

出处《Journal of Iron and Steel Research International》 SCIE CAS CSCD 2011年第S1期637-640,共4页

关键词 abrasion resistant steel heat treatment lath martensite tempered martensite HARDNESS abrasion resistant steel heat treatment lath martensite tempered martensite hardness

分类号 TF-55 [冶金工程]

引文网络
相关文献

参考文献6

1邓想涛,王昭东,袁国,王国栋.HB450低合金超高强耐磨钢组织与性能[J].东北大学学报（自然科学版）,2010,31(7):942-946. 被引量：21
2Li Degang,Zhang Jun,Wang Dong,et al.Development of NM400Abrasion-Resistant Low-Cost Heavy Plate[].Proceeding of theth International Conference on Steel Rolling.2010
3Yuan Guo,Kang Jian,Wang Zhaodong,et al.Effect of Heat Treatment on Microstructure and Mechanical Properties of HSLA Plate Steel[].Proceeding of theth International Conference on Steel Rolling.2010
4Dhua S K,Ray A,Sarma D S.Effect of tempering temperatures on the mechanical properties and microstructures of HSLA100type copper-beating steels[].Materials Science Engineering A Structural Materials Properties Microstructure and Processing.2001
5Leonard E Samuels.Light Microscopy of Carbon Steels[]..2003
6G.Krauss.Steels,Processing,Structure and Performance[]..2005

二级参考文献11

1程巨强,徐振华,康沫狂,李登凯,王新.HB400级高强度准贝氏体耐磨钢板的组织与性能[J].钢铁,2004,39(7):58-60. 被引量：17
2Rawers J C. Wear testing of high Fe-N-C steels[J]. Wear, 2005,258:32 - 39.
3Gunduz S, Acarer M. The effect of heat treatment on high temperature mechanical properties of micmalloyed medium carbon steel [J]. Materials and Design, 2006, 27 : 1076 - 1085.
4Sundstrom A, Rendon J, Olsson M. Wear behaviour of some low alloyed steels under combined impact/abrasion contact conditions[J]. Wear, 2001,250:744 - 754.
5Terra J, Teeri T, Kuokkala V T, et al. Abrasive wear of steel against gravel with different rock steel combinations[J]. Wear, 2009,267(11) : 1821 - 1831.
6Tomita Y, Okabayashi K. Effect of mierostrueture on strength and toughness of heat-treated low alloy structural steels [ J ]. Metallurgical Transactions A, 1986, 17 ( 7 ) : 1203 - 1209.
7Thomas G. Retained austenite and tempered martensite embitterment[J]. Metallurgical Transactions A, 1978, 9 (3):439-447.
8Swarr T, Krauss G. The effect of structure on the deformation of as-quenched and tempered martensite in an Fe0.2 pet C alloy [ J ]. Metallurgical Transactions A, 1976,7(1) :41 -48.
9徐祖耀.钢中的低碳马氏体及条间奥氏体.钢铁,1987,22(3):33-37.
10殷瑞钰.钢的质量现代进展[M].北京：冶金工业出版社,1995..

共引文献20

1王生朝,蔡素莉.HB400耐磨钢的生产工艺研究[J].湖南工业大学学报,2010,24(6):1-4. 被引量：3
2宋红宇,李灿明,周平,兰亮云,赵德文,王国栋.低成本NM400高强低合金耐磨钢的开发[J].轧钢,2012,29(4):1-3. 被引量：16
3赵月强,兰亮云,李灿明,赵德文.微钒Cr-B系NM400耐磨钢的热处理工艺[J].钢铁,2013,48(1):70-74.
4杨超,宋中华,丁翠娇,欧阳德刚,韩斌.明火式热处理炉180℃低温回火试验研究[J].工业炉,2014,36(5):15-17. 被引量：1
5李蒙,李鸿征,张秀领,祝庆,熊博文.多元低合金耐磨钢的强韧化处理[J].金属热处理,2015,40(10):117-122. 被引量：6
6黄夏旭,申炎华,靳舜尧,石博强.NM400/NM500级矿山机械用钢的高温磨损性能及机理[J].工程科学学报,2019,41(6):797-808. 被引量：3
7陈林恒,黄龙,杨柳,邓想涛,王昭东.低合金耐磨钢板NM450焊接性能研究[J].宽厚板,2017,23(6):13-17. 被引量：9
8刘丽敏,王立伟,闫俊霞,赵天亮.吉帕级低合金高强度推土机刀板用钢NM400焊接性能研究[J].河北冶金,2020(6):27-30. 被引量：1
9刘红艳,陈子刚,邓想涛,王昭东.焊接电流对专用车厢体耐磨钢NM500钢板焊接接头组织性能的影响[J].轧钢,2021,38(3):15-21. 被引量：4
10李成儒,邓想涛,梁亮,刘红艳,王昭东.新型耐高温磨损钢板组织性能与高温磨损行为研究[J].钢铁研究学报,2021,33(8):862-870. 被引量：8

同被引文献65

1麻衡.在线直接淬火工艺对低碳马氏体钢组织性能的影响[J].轧钢,2019,36(6):22-28. 被引量：15
2许亚娟,周清跃,陈朝阳,张银花,周镇国.回火工艺对1200MPa级贝氏体钢轨组织性能的影响[J].材料热处理学报,2012,33(S1):72-76. 被引量：20
3WANG Zhao-dong 1,KANG Jian 1,LU Feng 1,2,DENG Xiang-tao 1,WANG Chao 1,WANG Guo-dong 1 (1.State Key Lab of Rolling and Automation,Northeastern University,Shenyang 110004,Liaoning,China,2.Wide Heavy Plate Project Department of Tangshan Iron and Steel Corporation,Tangshan 063000,Hebei,China).Study on Quenching and Tempering Process of Q960 High Strength Steel for Construction Machinery[J].Journal of Iron and Steel Research International,2011,18(S1):432-436. 被引量：14
4雷万庆,杨松,杨文健.压力容器制造行业焊接、热处理技术的发展[J].大型铸锻件,2004(2):44-50. 被引量：7
5Chunfang WANG Maoqiu WANG Jie SHI Weijun HUI Han DONG.Effect of Microstructure Refinement on the Strength and Toughness of Low Alloy Martensitic Steel[J].Journal of Materials Science & Technology,2007,23(5):659-664. 被引量：54
6罗丽军.国外高强度耐磨钢生产概述[J].宽厚板,2008,14(3):46-48. 被引量：28
7王佳,时捷,王存宇,董瀚,周荣锋.新型马氏休耐磨钢的热处理工艺研究[J].矿山机械,2009,37(10):1-4. 被引量：1
8WANG Yong-wei FENG Chun XU Feng-yun BAI Bing-zhe FANG Hong-sheng.Influence of Nb on Microstructure and Property of Low-Carbon Mn-Series Air-Cooled Bainitic Steel[J].Journal of Iron and Steel Research International,2010,17(1):49-53. 被引量：7
9王国栋.TMCP技术的新进展—柔性化在线热处理技术与装备[J].轧钢,2010,27(2):1-6. 被引量：49
10邓想涛,王昭东,袁国,王国栋.HB450低合金超高强耐磨钢组织与性能[J].东北大学学报（自然科学版）,2010,31(7):942-946. 被引量：21

引证文献6

1胡日荣,武会宾,蔡庆伍,唐荻,郭爱民,张永青.Nb含量对NM550耐磨钢组织和力学性能的影响[J].材料热处理学报,2013,34(S2):41-45. 被引量：10
2胡日荣,蔡庆伍,武会宾,唐荻.热处理工艺对NM500耐磨钢组织和力学性能的影响[J].北京科技大学学报,2013,35(8):1015-1020. 被引量：11
3朱震宇,吴志方,吴润.回火温度对NM500耐磨钢组织和性能的影响[J].金属热处理,2022,47(10):154-159. 被引量：5
4镇凡,邵春娟,黄朋,曲锦波.淬火工艺对马氏体高强钢组织和性能的影响[J].钢铁研究学报,2022,34(10):1169-1176. 被引量：6
5赵虎庆,杨有福,俞禄沅,张佳杰,曹洋.SA-336 F11 CL.2与SA-765 Gr.Ⅱ异种钢对接焊工艺研究[J].石油化工设备,2024,53(3):24-32.
6李忠波,吴志方,吴润.低合金马氏体耐磨钢的研究进展[J].金属热处理,2024,49(7):132-138.

二级引证文献32

1王娜娜,刘金祥,熊毅.热处理对NbVTi合金灰铸铁组织和性能的影响[J].材料热处理学报,2015,36(2):114-118. 被引量：3
2黄夏旭,申炎华,靳舜尧,石博强.NM400/NM500级矿山机械用钢的高温磨损性能及机理[J].工程科学学报,2019,41(6):797-808. 被引量：3
3丛菁华,唐荻,武会宾,潘学福,车英建.锰对中锰耐磨钢组织形态及相变的影响[J].工程科学学报,2016,38(1):64-70. 被引量：2
4李军辉,邓想涛,王昭东.热处理工艺对NM400低合金钢板组织性能的影响[J].轧钢,2016,33(4):6-8. 被引量：10
5张拓,曹静,滕铝丹,杨弋涛.Nb对中铬耐磨铸钢组织及力学性能的影响[J].铸造,2017,66(10):1100-1103. 被引量：2
6吴丹,王福明,程锦,李长荣.钒对高铁制动盘钢中碳化物析出及力学性能的影响[J].工程科学学报,2018,40(1):68-75. 被引量：6
7王基月.工程机械用NM500耐磨钢的耐磨性能研究[J].热加工工艺,2018,47(6):103-104. 被引量：1
8吴翔,左秀荣,蔡明晖,赵威威.厚规格NM500耐磨钢板切割延迟裂纹的产生机理[J].材料与冶金学报,2019,18(4):280-285. 被引量：9
9甘平贵,牛刚,袁勤攀,邓深,武会宾.卷取温度对750L大梁钢显微组织和力学性能的影响[J].金属材料与冶金工程,2019,0(6):39-45. 被引量：3
10张家成,金洋帆,赵天天,杨弋涛.Nb对重载车用低合金铸钢组织及力学性能影响[J].铸造,2020,69(1):16-22. 被引量：2

1马智明,徐荣军,姚忠卯,马林海.Data mining techniques在冶金领域的应用[J].河南冶金,2001,9(2):3-8.
2Cun-yu WANG,Ying CHANG,Jie YANG,Wen quan CAO,Han DONG,Yi-de WANG.Work Hardening Behavior and Stability of Retained Austenite for Quenched and Partitioned Steels[J].Journal of Iron and Steel Research International,2016,23(2):130-137. 被引量：15
3De-ning ZOU,Xiao-hua LIU,Ying HAN,Wei ZHANG,Jiao LI,Kun WU.Influence of Heat Treatment Temperature on Microstructure and Property of 00Cr13Ni5Mo2 Supermartensitic Stainless Steel[J].Journal of Iron and Steel Research International,2014,21(3):364-368. 被引量：7
4静水矿业公司三季度铂族金属产量增加[J].中国金属通报,2009(44):13-13.
5姬长征（编译）.静水矿业公司第二季度铂族金属产量下滑18．2％[J].中国贵金属,2010(8):76-77.
6姬长征（编译）.静水矿业公司第三季度铂族金属产量上涨[J].中国贵金属,2009(12):67-67.
7ZHU Shuai,KANG Yong-lin,REN Kang-kang,WANG Chuan (School of Materials Science and Engineering.University of Science and Technology Beijing,Beijing 100083,China).The Effect of Nb on Mechanical Properties of Quenching and Partitioning Steels[J].Journal of Iron and Steel Research International,2011,18(S1):306-309. 被引量：1
8朱远志,尹志民,曾渝,黄继武,李学谦.Effects of heat treatment on microstructure and mechanical properties of Fe-Co-Ni-Cr-Mo-C alloy[J].Journal of Central South University of Technology,2004,11(3):229-234. 被引量：3
9伦丁矿业披露未来三年铅锌产量目标[J].中国金属通报,2012(47):16-16.
10万响亮,吴开明,王红鸿,卢伟煜,成林.Effect of Zr-Ti combined deoxidation on impact toughness of coarse-grained heat-affected zone with high heat input welding[J].China Welding,2014,23(4):56-62.

Journal of Iron and Steel Research International

2011年第S1期

浏览历史

内容加载中请稍等...