期刊文献+

Flow separation control by using bowed blade in highly loaded turbine cascades 被引量:3

Flow separation control by using bowed blade in highly loaded turbine cascades
原文传递
导出
摘要 Due to the serious flow separations and centralized vortices,there are high secondary losses in highly loaded turbines.It is imperative to find measures to control the flow separation and vortices hence improve the turbine performance.This paper reports our recent progress on flow separation and vor-tices control in highly loaded turbine cascades by using bowed blades.Two sets of highly loaded tur-bine cascades with the turning angles of 113° and 160°,and each with 7 bowed blade angles 0°(straight),±10°,±20° and ±30° were experimentally investigated.Both internal flow field measurement and flow visualization on the blade surfaces were conducted,and the effects of blade bowing on the flow topology,distribution of vorticity and the flow energy loss were discussed.The results show that,for the cascade with the turning angle of 113°,the appropriately positive bow angle could reduce the flow energy loss;whereas for the cascade with the turning angle of 160°,the well selected negative bow angle can give the better aerodynamic performance. Due to the serious flow separations and centralized vortices, there are high secondary losses in highly loaded turbines. It is imperative to find measures to control the flow separation and vortices hence improve the turbine performance. This paper reports our recent progress on flow separation and vortices control in highly loaded turbine cascades by using bowed blades. Two sets of highly loaded turbine cascades with the turning angles of 113° and 160°, and each with 7 bowed blade angles 0° (straight), ±10°, ±20° and ±30° were experimentally investigated. Both internal flow field measurement and flow visualization on the blade surfaces were conducted, and the effects of blade bowing on the flow topology, distribution of vorticity and the flow energy loss were discussed. The results show that, for the cascade with the turning angle of 113°, the appropriately positive bow angle could reduce the flow energy loss; whereas for the cascade with the turning angle of 160°, the well selected negative bow angle can give the better aerodynamic performance.
出处 《Science China(Technological Sciences)》 SCIE EI CAS 2009年第6期1471-1477,共7页 中国科学(技术科学英文版)
基金 Supported by the National Natural Science Foundation of China(Grant No.10577019)
关键词 TURBINE CASCADE TURNING ANGLE flow SEPARATION bowed BLADE turbine cascade turning angle flow separation bowed blade
  • 相关文献

参考文献10

  • 1Wang Z,Lai S,Xu W.Aerodynamic calculation of turbine stator cascades with curvilinear leaned blades and some experimental results. Symposium Paper of 5th ISABE . 1981
  • 2Tan C,Yamamoto A,Chen H.Flowfield and aerodynamic perform- ance of a turbine stator cascade with bowed blades. AIAA Journal . 2004
  • 3Moustapha,S.H.Secondary Flows in Cascades of Highly Loaded Turbine Blades. ASME Journal of Engineering for Gas Turbines and Power . 1985
  • 4Moustapha S H,Okapuu U,Williamson R G.Influence ofRotor Blade Aerodynamic Loading on the Performance ofa Highly Loaded Turbine Stage. ASME Journal of Tur-bomachinery . 1987
  • 5Lisa W G,Frank W H.Advancement of Turbine Aerody-namic Design Techniques. ASME 93-GT-370 . 1993
  • 6Yamamoto A,Matsunuma T,Outa E.Three dimensional flows and losses in an ultra-highly loaded turbine [ R ]. Proceeding of the 7 th international symposium on transport phenom ena and dynam ics of rotating machinery . 1998
  • 7Yamamoto A.Some Current Studies on Turbine Aerody-namics at NAL. Proceedings of Colloquium on Turbo-machinery . 1996
  • 8Yamamoto A,Usui H,Tan C,et al.Research on Ultra-Highly Loaded Turbine. 2nd Japan ESPR Meeting . 2004
  • 9W Han,Z Wang,C Tan,H Shi,M Zhou.Effects of leaning and curving of blades with high turning angles on the aerodynamic characteristics of turbine rectangular cascades. J Turbomach . 1994
  • 10Tan C.Yamamoto A,Mizuki S,et al.Influences of blade bowing on flow fields of turbine stator cascades. AIAA Journal . 2003

同被引文献24

  • 1Kerrebrock J L,Drela M A,Merchant Aet al.A family of designs for aspirated compressors. ASME Paper 98-GT-196 . 1998
  • 2Song Y,Chen F,Jun Y,et al.A numerical investigation of boundary layer suction in compound lean compressor cascades. ASME PaperGT 2005-68441 . 2005
  • 3Semiu A G,Nicholas A C,Tom P H.Control of three-dimensional separations in axial compressors by tailored boundary layer suction. J Turbomach . 2008
  • 4Loughery R,Horn R A.Single stage experimentalevaluation of boundary layer blowing and bleed techniquesfor high lift stator blades. NASA,CR-54573 . 1971
  • 5A. J. Wennerstrom.Highly Loaded Axial Flow Compressor: History and Current Development. Trans. of the ASME, J. of Turbomachinery . 1990
  • 6J. L. Kerrebrock,,D. P. Reijnan,,W. S. Ziminsky,,L. M. Smilg.AspiratedCompressors. ASME Paper 97-GT-52 . 1997
  • 7Reijnen D P.Experimental study of boundary layer suc-tion in a trasonic compressor. . 1997
  • 8Ali Merchant,Jack L.Kerrebrock.Experimental Investigation of a High Preessure Ratio Aspirated Fan Stage. Proceedings of ASME Turbo Expo . 2004
  • 9Merchant A A,Drela M,Kerrebrock J L,et al.Aerodynamic Design and Analysis of a High Pressure Ratio Aspirated Compressor Stage. ASME Paper 2000-GT-619 . 2000
  • 10Merchant A A,Drela M,Kerrebrock J L,et al.Aerodynamic Design and Analysis of a High Pressure Ratio Aspirated Compressor Stage. ASME Paper 2000-GT-619 . 2000

引证文献3

二级引证文献18

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部