Metal-organic frameworks(MOFs)have been extensively considered as one of the most promising types of porous and crystalline organic-inorganic materials,thanks to their large specific surface area,high porosity,tailora...Metal-organic frameworks(MOFs)have been extensively considered as one of the most promising types of porous and crystalline organic-inorganic materials,thanks to their large specific surface area,high porosity,tailorable structures and compositions,diverse functionalities,and well-controlled pore/size distribution.However,most developed MOFs are in powder forms,which still have some technical challenges,including abrasion,dustiness,low packing densities,clogging,mass/heat transfer limitation,environmental pollution,and mechanical instability during the packing process,that restrict their applicability in industrial applications.Therefore,in recent years,attention has focused on techniques to convert MOF powders into macroscopic materials like beads,membranes,monoliths,gel/sponges,and nanofibers to overcome these challenges.Three-dimensional(3D)printing technology has achieved much interest because it can produce many high-resolution macroscopic frameworks with complex shapes and geometries from digital models.Therefore,this review summarizes the combination of different 3D printing strategies with MOFs and MOF-based materials for fabricating 3D-printed MOF monoliths and their environmental applications,emphasizing water treatment and gas adsorption/separation applications.Herein,the various strategies for the fabrication of 3D-printed MOF monoliths,such as direct ink writing,seed-assisted in-situ growth,coordination replication from solid precursors,matrix incorporation,selective laser sintering,and digital light processing,are described with the relevant examples.Finally,future directions and challenges of 3D-printed MOF monoliths are also presented to better plan future trajectories in the shaping of MOF materials with improved control over the structure,composition,and textural properties of 3D-printed MOF monoliths.展开更多
Surveying ionizing radiations of the surrounding with a smartphone provides a low-cost and convenient utility for the general public. We developed a smartphone application(App) that uses the built-in camera with a CMO...Surveying ionizing radiations of the surrounding with a smartphone provides a low-cost and convenient utility for the general public. We developed a smartphone application(App) that uses the built-in camera with a CMOS sensor and a radiation signal extraction algorithm.After a calibration through a series of radiation exposures,the App could display radiation dose rate and cumulative dose in real time without requiring covering the camera lens. A smartphone with this App can be used as a fast survey tool for ionizing radiations.展开更多
COconversion via photocatalysis is a potential solution to address global warming and energy shortage.Photocatalysis can directly utilize the inexhaustible sunlight as an energy source to catalyze the reduction of COt...COconversion via photocatalysis is a potential solution to address global warming and energy shortage.Photocatalysis can directly utilize the inexhaustible sunlight as an energy source to catalyze the reduction of COto useful solar fuels such as CO, CH, CHOH, and CHOH. Among studied formulations, Cubased photocatalysts are the most attractive for COconversion because the Cu-based photocatalysts are low-cost and abundance comparing noble metal-based catalysts. In this literature review, a comprehensive summary of recent progress on Cu-based photocatalysts for COconversion, which includes metallic copper, copper alloy nanoparticles（NPs）, copper oxides, and copper sulfides photocatalysts, can be found. This review also included a detailed discussion on the correlations of morphology, structure, and performance for each type of Cu-based catalysts. The reaction mechanisms and possible pathways for productions of various solar fuels were analyzed, which provide insight into the nature of potential active sites for the catalysts. Finally, the current challenges and perspective future research directions were outlined, holding promise to advance Cu-based photocatalysts for COconversion with much-enhanced energy conversion efficiency and production rates.展开更多
The lithium-sulfur battery has attracted enormous attention as being one of the most significant energy storage technologies due to its high energy density and cost-effectiveness.However,the "shuttle effect"...The lithium-sulfur battery has attracted enormous attention as being one of the most significant energy storage technologies due to its high energy density and cost-effectiveness.However,the "shuttle effect" of polysulfide intermediates represents a formidable challenge towards its wide applications.Herein,we have designed and synthesized two-dimensional Cu,Zn and Sn-based multimetallic sulfide nanosheets to construct multi-active sites for the immobilization and entrapment of polysulfides with offering better performance in liquid Li2S6-based lithium-polysulfide batteries.Both experimental measurements and theoretical computations demonstrate that the interfacial multi-active sites of multimetallic sulfides not only accelerate the multi-chained redox reactions of highly diffusible polysulfides,but also strengthen affinities toward polysulfides.By adopting multimetallic sulfide nanosheets as the sulfur host,the liquid Li2 S6-based cell exhibits an impressive rate capability with 1200 mAh/g and retains 580 mAh/g at 0.5 mA/cm^(2) after 1000 cycles.With high sulfur mass loading conditions,the cell with 2.0 mg/cm^(2) sulfur loading delivers a cell capacity of 1068 mAh/g and maintains 480 mAh/g with 0.8 mA/cm^(2) and 500 cycles.This study provides new insights into the multifunctional material design with multi-active sites for elevated lithium-polysulfide batteries.展开更多
More and more embedded devices, such as mobile phones, tablet PCs and laptops, are used in every field, so huge files need to be stored or backed up into cloud storage. Optimizing the performance of cloud storage is v...More and more embedded devices, such as mobile phones, tablet PCs and laptops, are used in every field, so huge files need to be stored or backed up into cloud storage. Optimizing the performance of cloud storage is very important for Internet development. This paper presents the performance evaluation of the open source distributed storage system, a highly available, distributed, eventually consistent object/blob store from Open Stack cloud computing components. This paper mainly focuses on the mechanism of cloud storage as well as the optimization methods to process different sized files. This work provides two major contributions through comprehensive performance evaluations. First, it provides different configurations for Open Stack Swift system and an analysis of how every component affects the performance. Second, it presents the detailed optimization methods to improve the performance in processing different sized files. The experimental results show that our method improves the performance and the structure. We give the methods to optimize the object-based cloud storage system to deploy the readily available storage system.展开更多
Transparent conducting materials(TCMs)have been widely used in optoelectronic applications such as touchscreens,flat panel displays and thin film solar cells.These applications of TCMs are currently dominated by n-typ...Transparent conducting materials(TCMs)have been widely used in optoelectronic applications such as touchscreens,flat panel displays and thin film solar cells.These applications of TCMs are currently dominated by n-type doped oxides.High-performance p-type TCMs are still lacking due to their low hole mobility or p-type doping bottleneck,which impedes efficient device design and novel applications such as transparent electronics.Here,based on first-principles calculations,we propose chalcogenide perovskite YScS3 as a promising p-type TCM.According to our calculations,its optical absorption onset is above 3 eV,which allows transparency to visible light.Its hole conductivity effective mass is 0.48 m0,which is among the smallest in p-type TCMs,suggesting enhanced hole mobility.It could be doped to p-type by group-Ⅱelements on cation sites,all of which yield shallow acceptors.Combining these properties,YSCS3 holds great promise to enhancing the performance of p-type TCMs toward their n-type counterparts.展开更多
MnFe204 nanoparticles （NPs） with various sizes and tight size-distribution were synthesized by a chemical solution- phase method. The as-synthesized NPs were coated with a silica shell of 4 nm-5 nm in thickness, ena...MnFe204 nanoparticles （NPs） with various sizes and tight size-distribution were synthesized by a chemical solution- phase method. The as-synthesized NPs were coated with a silica shell of 4 nm-5 nm in thickness, enabling the water- solubility and biocompatibility of the NPs. The MnFe204 NPs with a size of less than 18 nm exhibit superparamagnetic behavior with high saturated magnetization. The capacity of the heat production was enhanced by increasing particle sizes and radio frequency （RF） field strengths. MnFe204/SiO2 NPs with 18-nm magnetic cores showed the highest heat- generation ability under an RF field. These MnFe204/SiO2 NPs have great potentiality to cancer treatments, controlled drug releases, and remote controls of single cell functions.展开更多
A new Fe Pt nanostructure with stripe-like patterns has been prepared by direct current（DC） magnetron sputtering on anodic aluminum oxide（AAO） templates. AAO templates anodized under low voltages（7 V） demonstrat...A new Fe Pt nanostructure with stripe-like patterns has been prepared by direct current（DC） magnetron sputtering on anodic aluminum oxide（AAO） templates. AAO templates anodized under low voltages（7 V） demonstrate self-organized,maze-like patterns, different from the conventional porous structures obtained at high voltages. Fe Pt thin films deposited on such templates tend to replicate the morphology of the templates. Although there is no obvious spatial ordering, the dimensions of the Fe Pt nano-stripes are highly uniform, due to the constrained growth along the transverse direction of the AAO pattern. The magnetic properties are strongly influenced by this unique morphology. While continuous films demonstrate strong exchange coupling, the dominant interaction in Fe Pt nano-stripes with the same nominal thickness is magnetostatic. The morphology also dictates the magnetization reversal behaviors, with thin films dominated by domain nucleation; while nano-stripes incline to reverse their magnetization by spin rotation. Our work demonstrates that selforganized AAO templates can be used to control the morphology and magnetic behavior of Fe Pt materials.展开更多
Thanks to the excellent optoelectronic properties,lead halide perovskites(LHPs)have been widely employed in highperformance optoelectronic devices such as solar cells and lightemitting diodes.However,overcoming their ...Thanks to the excellent optoelectronic properties,lead halide perovskites(LHPs)have been widely employed in highperformance optoelectronic devices such as solar cells and lightemitting diodes.However,overcoming their poor stability against water has been one of the biggest challenges for most applications.Herein,we report a novel hot-injection method in a Pb-poor environment combined with a well-designed purification process to synthesize water-dispersible CsPbBr_(3) nanocrystals(NCs).The as-prepared NCs sustain their superior photoluminescence(91%quantum yield in water)for more than 200 days in an aqueous environment,which is attributed to a passivation effect induced by excess CsBr salts.Thanks to the ultra-stability of these LHP NCs,for the first time,we report a new application of LHP NCs,in which they are applied to electrocatalysis of CO_(2) reduction reaction.Noticeably,they show significant electrocatalytic activity(faradaic yield:32%for CH4,40%for CO)and operation stability(>350 h).展开更多
Aprogress towards full deployment in the near future,we have witnessed tremendous growth of smart mobile devices capable of various video streaming and sharing services.Mobile video services account for majority of th...Aprogress towards full deployment in the near future,we have witnessed tremendous growth of smart mobile devices capable of various video streaming and sharing services.Mobile video services account for majority of the current Internet and wireless data services.Unlike other type of data services,the quality of video service is primarily governed by the end users who are watching videos on the receiving display terminals.The perception and experience of the end users should be the true criteria to assess the quality of the video services.For emerging video communication services,it is the quality of experience,or QoE in short,of the users that should be the most important measure for systematic design for next generation mobile communications.展开更多
Industrial thin-film composite(TFC)membranes achieve superior gas separation properties from high-performance selective layer materials,while the success of membrane technology relies on high-performance gutter layers...Industrial thin-film composite(TFC)membranes achieve superior gas separation properties from high-performance selective layer materials,while the success of membrane technology relies on high-performance gutter layers to achieve production scalability and low-cost manufacturing.However,the current literature predominantly focuses on the design of polymer architectures to obtain high permeability and selectivity,while the art of fabricating gutter layers is usually safeguarded by industrial manufacturers and appears lackluster to academic researchers.This is the first report aiming to provide a comprehensive and critical review of state-of-the-art gutter layer materials and their design and modification to enable TFC membranes with superior separation performance.We first elucidate the importance of the gutter layer on membrane performance through modeling and experimental results.Then various gutter layer materials used to obtain high-performance composite membranes are critically reviewed,and the strategies to improve their compatibility with the selective layer are highlighted,such as oxygen plasma treatment,polydopamine deposition,and surface grafting.Finally,we present the opportunities of the gutter layer design for practical applications.展开更多
Tumor lymph node(LN)metastasis seriously affects the treatment prognosis.Studies have shown that nanoparticles with size of sub-50 nm can directly penetrate into LN metastases after intravenous administration.Here,we ...Tumor lymph node(LN)metastasis seriously affects the treatment prognosis.Studies have shown that nanoparticles with size of sub-50 nm can directly penetrate into LN metastases after intravenous administration.Here,we speculate through introducing targeting capacity,the nanoparticle accumulation in LN metastases would be further enhanced for improved local treatment such as photothermal therapy.Trastuzumabtargeted micelles(<50 nm)were formulated using a unique surfactantstripping approach that yielded concentrated phthalocyanines with strong near-infrared absorption.Targeted micellar phthalocyanine(T-MP)was an effective photothermal transducer and ablated HT-29 cells in vitro.A HER2-expressing colorectal cancer cell line(HT-29)was used to establish an orthotopic mouse model that developed metastatic disease in mesenteric sentinel LN.T-MP accumulated more in the LN metastases compared to the micelles conjugated with control IgG.Following surgical resection of the primary tumor,minimally invasive photothermal treatment of the metastatic LN with T-MP,but not the control micelles,extended mouse survival.Our findings demonstrate for the first time that targeted small-sized nanoparticles have potential to enable superior paradigms for dealing with LN metastases.展开更多
With relatively high transmission capacity and usually unconstrained connections, IEEE802.11 WLANs provide the ideal infrastructure for pervasive video content sharing and communications. However, the delivery of high...With relatively high transmission capacity and usually unconstrained connections, IEEE802.11 WLANs provide the ideal infrastructure for pervasive video content sharing and communications. However, the delivery of high-performance video streams over 802.11 WLANs remains a challenging task due to the inherent characteristics of compressed video and dynamic channels. In this paper, we present a brief survey of various recent innovations that have been developed to enhance the Quality of Service (QoS) performance for video over WLANs. Based on the application scenarios, the solutions have focused mainly on three network layers, that is, Application layer (APP), Media Access Control layer (MAC), and Physical layer (PHY). After reviewing the video compression technology, we first examine various single-layer solutions for video over WLANs. We then discuss several cross-layer solutions that take advantage of mutual interactions between different network layers. Finally, several technical issues beyond QoS performance, including energy and security, are also addressed. We conclude that the application of video over WLANs will continue to increase in future.展开更多
文摘Metal-organic frameworks(MOFs)have been extensively considered as one of the most promising types of porous and crystalline organic-inorganic materials,thanks to their large specific surface area,high porosity,tailorable structures and compositions,diverse functionalities,and well-controlled pore/size distribution.However,most developed MOFs are in powder forms,which still have some technical challenges,including abrasion,dustiness,low packing densities,clogging,mass/heat transfer limitation,environmental pollution,and mechanical instability during the packing process,that restrict their applicability in industrial applications.Therefore,in recent years,attention has focused on techniques to convert MOF powders into macroscopic materials like beads,membranes,monoliths,gel/sponges,and nanofibers to overcome these challenges.Three-dimensional(3D)printing technology has achieved much interest because it can produce many high-resolution macroscopic frameworks with complex shapes and geometries from digital models.Therefore,this review summarizes the combination of different 3D printing strategies with MOFs and MOF-based materials for fabricating 3D-printed MOF monoliths and their environmental applications,emphasizing water treatment and gas adsorption/separation applications.Herein,the various strategies for the fabrication of 3D-printed MOF monoliths,such as direct ink writing,seed-assisted in-situ growth,coordination replication from solid precursors,matrix incorporation,selective laser sintering,and digital light processing,are described with the relevant examples.Finally,future directions and challenges of 3D-printed MOF monoliths are also presented to better plan future trajectories in the shaping of MOF materials with improved control over the structure,composition,and textural properties of 3D-printed MOF monoliths.
基金supported in part by Fundamental Research Funds for the Central Universities(No.FRF-TP-15-114A1)the National Natural Science Foundation of China(No.11505300&11605008)
文摘Surveying ionizing radiations of the surrounding with a smartphone provides a low-cost and convenient utility for the general public. We developed a smartphone application(App) that uses the built-in camera with a CMOS sensor and a radiation signal extraction algorithm.After a calibration through a series of radiation exposures,the App could display radiation dose rate and cumulative dose in real time without requiring covering the camera lens. A smartphone with this App can be used as a fast survey tool for ionizing radiations.
基金financial supports from the National 1000 Young Talents Program of Chinathe National Nature Science Foundation of China (21603078)+1 种基金the National Materials Genome Project (2016YFB0700600)financial support from Research and Education in eNergy, Environment and Water (RENEW)Institute at the University at Buffalo, SUNY
文摘COconversion via photocatalysis is a potential solution to address global warming and energy shortage.Photocatalysis can directly utilize the inexhaustible sunlight as an energy source to catalyze the reduction of COto useful solar fuels such as CO, CH, CHOH, and CHOH. Among studied formulations, Cubased photocatalysts are the most attractive for COconversion because the Cu-based photocatalysts are low-cost and abundance comparing noble metal-based catalysts. In this literature review, a comprehensive summary of recent progress on Cu-based photocatalysts for COconversion, which includes metallic copper, copper alloy nanoparticles（NPs）, copper oxides, and copper sulfides photocatalysts, can be found. This review also included a detailed discussion on the correlations of morphology, structure, and performance for each type of Cu-based catalysts. The reaction mechanisms and possible pathways for productions of various solar fuels were analyzed, which provide insight into the nature of potential active sites for the catalysts. Finally, the current challenges and perspective future research directions were outlined, holding promise to advance Cu-based photocatalysts for COconversion with much-enhanced energy conversion efficiency and production rates.
基金supported by the Start-up Foundation of Nanjing Tech Universitythe National Natural Science Foundation of China (61904080, 61801210, 91833302)+3 种基金the Natural Science Foundation of Jiangsu Province (BK20190670, BK20180686)the Natural Science Foundation of Colleges and Universities in Jiangsu Province (19KJB530008)the Innovation Scientists and Technicians Team Construction Projects of Henan Province (CXTD2017002)the funding for “Distinguished professors” and “High-level talents in six industries” of Jiangsu Province and Technology Innovation Project for Overseas Scholar in Nanjing。
文摘The lithium-sulfur battery has attracted enormous attention as being one of the most significant energy storage technologies due to its high energy density and cost-effectiveness.However,the "shuttle effect" of polysulfide intermediates represents a formidable challenge towards its wide applications.Herein,we have designed and synthesized two-dimensional Cu,Zn and Sn-based multimetallic sulfide nanosheets to construct multi-active sites for the immobilization and entrapment of polysulfides with offering better performance in liquid Li2S6-based lithium-polysulfide batteries.Both experimental measurements and theoretical computations demonstrate that the interfacial multi-active sites of multimetallic sulfides not only accelerate the multi-chained redox reactions of highly diffusible polysulfides,but also strengthen affinities toward polysulfides.By adopting multimetallic sulfide nanosheets as the sulfur host,the liquid Li2 S6-based cell exhibits an impressive rate capability with 1200 mAh/g and retains 580 mAh/g at 0.5 mA/cm^(2) after 1000 cycles.With high sulfur mass loading conditions,the cell with 2.0 mg/cm^(2) sulfur loading delivers a cell capacity of 1068 mAh/g and maintains 480 mAh/g with 0.8 mA/cm^(2) and 500 cycles.This study provides new insights into the multifunctional material design with multi-active sites for elevated lithium-polysulfide batteries.
基金performed by key technology of networking media broadcast based on cloud computing in"China Twelfth Five-Year"Plan for Science&Technology Project(Grant No.:2013BAH65F01-2013BAH65F04)NSFC(Grant No.:61472144)+3 种基金National science and technology support plan(Grant No.:2013BAH65F03,2013BAH65F04)GDSTP(Grant No.:2013B010202004,2014A010103012)GDUPS(2011)Research Fund for the Doctoral Program of Higher Education of China(Grant No.:20120172110023)
文摘More and more embedded devices, such as mobile phones, tablet PCs and laptops, are used in every field, so huge files need to be stored or backed up into cloud storage. Optimizing the performance of cloud storage is very important for Internet development. This paper presents the performance evaluation of the open source distributed storage system, a highly available, distributed, eventually consistent object/blob store from Open Stack cloud computing components. This paper mainly focuses on the mechanism of cloud storage as well as the optimization methods to process different sized files. This work provides two major contributions through comprehensive performance evaluations. First, it provides different configurations for Open Stack Swift system and an analysis of how every component affects the performance. Second, it presents the detailed optimization methods to improve the performance in processing different sized files. The experimental results show that our method improves the performance and the structure. We give the methods to optimize the object-based cloud storage system to deploy the readily available storage system.
基金supported by the National Natural Science Foundation of China(Grant No.11774365)supported by the Natural Science Foundation of Shanghai+3 种基金China(Grant No.19ZR1421800)the Science Foundation for Youth Scholar of State Key Laboratory of High Performance Ceramics and Superfine Microstructures(Grant No.SKL 201804)supported by the U.S.NSF(Grant Nos.CBET-1510121 and CBET-1510948)supported by the U.S.DOE(Grant No.DE-SC0002623)。
文摘Transparent conducting materials(TCMs)have been widely used in optoelectronic applications such as touchscreens,flat panel displays and thin film solar cells.These applications of TCMs are currently dominated by n-type doped oxides.High-performance p-type TCMs are still lacking due to their low hole mobility or p-type doping bottleneck,which impedes efficient device design and novel applications such as transparent electronics.Here,based on first-principles calculations,we propose chalcogenide perovskite YScS3 as a promising p-type TCM.According to our calculations,its optical absorption onset is above 3 eV,which allows transparency to visible light.Its hole conductivity effective mass is 0.48 m0,which is among the smallest in p-type TCMs,suggesting enhanced hole mobility.It could be doped to p-type by group-Ⅱelements on cation sites,all of which yield shallow acceptors.Combining these properties,YSCS3 holds great promise to enhancing the performance of p-type TCMs toward their n-type counterparts.
文摘MnFe204 nanoparticles （NPs） with various sizes and tight size-distribution were synthesized by a chemical solution- phase method. The as-synthesized NPs were coated with a silica shell of 4 nm-5 nm in thickness, enabling the water- solubility and biocompatibility of the NPs. The MnFe204 NPs with a size of less than 18 nm exhibit superparamagnetic behavior with high saturated magnetization. The capacity of the heat production was enhanced by increasing particle sizes and radio frequency （RF） field strengths. MnFe204/SiO2 NPs with 18-nm magnetic cores showed the highest heat- generation ability under an RF field. These MnFe204/SiO2 NPs have great potentiality to cancer treatments, controlled drug releases, and remote controls of single cell functions.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51025101,51101095,61434002,11274214,and 51301099)the Program of"One Hundred Talented People"of Shanxi Province,China
文摘A new Fe Pt nanostructure with stripe-like patterns has been prepared by direct current（DC） magnetron sputtering on anodic aluminum oxide（AAO） templates. AAO templates anodized under low voltages（7 V） demonstrate self-organized,maze-like patterns, different from the conventional porous structures obtained at high voltages. Fe Pt thin films deposited on such templates tend to replicate the morphology of the templates. Although there is no obvious spatial ordering, the dimensions of the Fe Pt nano-stripes are highly uniform, due to the constrained growth along the transverse direction of the AAO pattern. The magnetic properties are strongly influenced by this unique morphology. While continuous films demonstrate strong exchange coupling, the dominant interaction in Fe Pt nano-stripes with the same nominal thickness is magnetostatic. The morphology also dictates the magnetization reversal behaviors, with thin films dominated by domain nucleation; while nano-stripes incline to reverse their magnetization by spin rotation. Our work demonstrates that selforganized AAO templates can be used to control the morphology and magnetic behavior of Fe Pt materials.
基金This research was supported by the National Natural Science Foundation of China(Nos.11674258,51602305,51702219,61975134,11904250)Guangdong Basic and Applied Basic Research Foundation(2020B1515020051)+2 种基金the Science and Technology Innovation Commission of Shenzhen(JCYJ20180305125345378)Shenzhen Nanshan District Pilotage Team Program(LHTD20170006)Partial support from The Institute For Lasers,Photonics and Biophotonics at The University at Buffalo is also acknowledged.T.Z.and I.Z.were supported by the U.S.DOE,Office of Science BES,Award No.DE-SC0004890.
文摘Thanks to the excellent optoelectronic properties,lead halide perovskites(LHPs)have been widely employed in highperformance optoelectronic devices such as solar cells and lightemitting diodes.However,overcoming their poor stability against water has been one of the biggest challenges for most applications.Herein,we report a novel hot-injection method in a Pb-poor environment combined with a well-designed purification process to synthesize water-dispersible CsPbBr_(3) nanocrystals(NCs).The as-prepared NCs sustain their superior photoluminescence(91%quantum yield in water)for more than 200 days in an aqueous environment,which is attributed to a passivation effect induced by excess CsBr salts.Thanks to the ultra-stability of these LHP NCs,for the first time,we report a new application of LHP NCs,in which they are applied to electrocatalysis of CO_(2) reduction reaction.Noticeably,they show significant electrocatalytic activity(faradaic yield:32%for CH4,40%for CO)and operation stability(>350 h).
文摘Aprogress towards full deployment in the near future,we have witnessed tremendous growth of smart mobile devices capable of various video streaming and sharing services.Mobile video services account for majority of the current Internet and wireless data services.Unlike other type of data services,the quality of video service is primarily governed by the end users who are watching videos on the receiving display terminals.The perception and experience of the end users should be the true criteria to assess the quality of the video services.For emerging video communication services,it is the quality of experience,or QoE in short,of the users that should be the most important measure for systematic design for next generation mobile communications.
基金support from the U.S.Department of Energy National Energy Technology Laboratory(DE-FE0031736)the New York State Foundation for Science,Technology and Innovation(NYSTAR).
文摘Industrial thin-film composite(TFC)membranes achieve superior gas separation properties from high-performance selective layer materials,while the success of membrane technology relies on high-performance gutter layers to achieve production scalability and low-cost manufacturing.However,the current literature predominantly focuses on the design of polymer architectures to obtain high permeability and selectivity,while the art of fabricating gutter layers is usually safeguarded by industrial manufacturers and appears lackluster to academic researchers.This is the first report aiming to provide a comprehensive and critical review of state-of-the-art gutter layer materials and their design and modification to enable TFC membranes with superior separation performance.We first elucidate the importance of the gutter layer on membrane performance through modeling and experimental results.Then various gutter layer materials used to obtain high-performance composite membranes are critically reviewed,and the strategies to improve their compatibility with the selective layer are highlighted,such as oxygen plasma treatment,polydopamine deposition,and surface grafting.Finally,we present the opportunities of the gutter layer design for practical applications.
基金Hai-Yi Feng and Yihang Yuan contributed equally to this work.We thank Prof.Gang Zheng(University of Toronto)for valuable discussion.We also thank the Core Facility of Basic Medical Sciences(SJTU-SM)for frozen section making and scanningThis work was supported by National Natural Science Foundation of China(81572998,81773274,82073379)+1 种基金Shanghai Municipal Science and Technology Commission(20ZR1451700,16520710700)Shanghai Collaborative Innovation Center for Translational Medicine(TM201731).
文摘Tumor lymph node(LN)metastasis seriously affects the treatment prognosis.Studies have shown that nanoparticles with size of sub-50 nm can directly penetrate into LN metastases after intravenous administration.Here,we speculate through introducing targeting capacity,the nanoparticle accumulation in LN metastases would be further enhanced for improved local treatment such as photothermal therapy.Trastuzumabtargeted micelles(<50 nm)were formulated using a unique surfactantstripping approach that yielded concentrated phthalocyanines with strong near-infrared absorption.Targeted micellar phthalocyanine(T-MP)was an effective photothermal transducer and ablated HT-29 cells in vitro.A HER2-expressing colorectal cancer cell line(HT-29)was used to establish an orthotopic mouse model that developed metastatic disease in mesenteric sentinel LN.T-MP accumulated more in the LN metastases compared to the micelles conjugated with control IgG.Following surgical resection of the primary tumor,minimally invasive photothermal treatment of the metastatic LN with T-MP,but not the control micelles,extended mouse survival.Our findings demonstrate for the first time that targeted small-sized nanoparticles have potential to enable superior paradigms for dealing with LN metastases.
文摘With relatively high transmission capacity and usually unconstrained connections, IEEE802.11 WLANs provide the ideal infrastructure for pervasive video content sharing and communications. However, the delivery of high-performance video streams over 802.11 WLANs remains a challenging task due to the inherent characteristics of compressed video and dynamic channels. In this paper, we present a brief survey of various recent innovations that have been developed to enhance the Quality of Service (QoS) performance for video over WLANs. Based on the application scenarios, the solutions have focused mainly on three network layers, that is, Application layer (APP), Media Access Control layer (MAC), and Physical layer (PHY). After reviewing the video compression technology, we first examine various single-layer solutions for video over WLANs. We then discuss several cross-layer solutions that take advantage of mutual interactions between different network layers. Finally, several technical issues beyond QoS performance, including energy and security, are also addressed. We conclude that the application of video over WLANs will continue to increase in future.
