Copper is a strategic metal that plays an important role in many industries.In copper metallurgy,electrolytic refining is essential to obtain high-purity copper.However,during the electrolytic refining process,impurit...Copper is a strategic metal that plays an important role in many industries.In copper metallurgy,electrolytic refining is essential to obtain high-purity copper.However,during the electrolytic refining process,impurities such as arsenic are introduced into the electrolyte,which significantly affect the subsequent production and quality of copper products.This paper first discusses the sources,forms,and transformation pathways of arsenic in copper electrolyte during the electrolytic process,then reviews various arsenic removal technologies in detail,including electrowinning,adsorption,solvent extraction,ion exchange,membrane filtration,and precipitation.Particular emphasis is placed on electrowinning,which is the most widely used and mature among these arsenic removal techniques.The paper evaluates these methods based on arsenic removal efficiency,cost effectiveness,technical maturity,environmental friendliness,and operation simplicity.In addition,the paper explores future trends in copper electrolyte purification,focusing on waste reduction at source,resource utilization,intelligent digitalization,and innovations in materials and processes.This review aims to provide researchers and practitioners with a comprehensive and in-depth reference on arsenic removal methods in copper electrolytes.展开更多
Di-n-butyl phthalate (DBP),one of phthalate acid esters (PAEs),was investigated to determine its biodegradation rate using Xiangjiang River sediment and find potential DBP degraders in the enrichment culture of the se...Di-n-butyl phthalate (DBP),one of phthalate acid esters (PAEs),was investigated to determine its biodegradation rate using Xiangjiang River sediment and find potential DBP degraders in the enrichment culture of the sediment. The sediment sample was incubated with an initial concentration of DBP of 100 mg/L for 5 d. The biodegradation rate of DBP was detected using HPLC and the degraded products were analyzed by GC/MS. Subsequently,the microbial diversity of the enrichment culture was analyzed by polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). The results reveal that almost 100% of DBP is degraded after merely 3 d,generating two main degraded products:mono-butyl phthalate (MBP) and 9-octadecenoic acid. After a six-month enrichment period under the pressure of DBP,the dominant family in the final enrichment culture is clustered with the Comamonas sp.,the remaining are affiliated with Sphingomonas sp.,Hydrogenophaga sp.,Rhizobium sp.,and Acidovorax sp. The results show the potential of these bacteria to be used in the bioremediation of DBP in the environment.展开更多
Factors on degradation of chlorothalonil(CLT) in water by high frequency ultrasonic irradiation were investigated.The effects of initial concentration of chlorothalonil,dosages of tertiary butyl alcohol,humic acid and...Factors on degradation of chlorothalonil(CLT) in water by high frequency ultrasonic irradiation were investigated.The effects of initial concentration of chlorothalonil,dosages of tertiary butyl alcohol,humic acid and initial pH value on degradation of chlorothalonil,as well as the reaction mechanism were studied.The results reveal that chlorothalonil could be effectively degradated by ultrasonic irradiation.The reaction constant value kapp decreased from 0.014 1 to 0.010 2 min-1 with the initial concentration increasing from 50 to 400 μg/L during 180 min irradiation.Tertiary butyl alcohol had negative effect on chlorothalonil degradation,while lower concentration of humic acid promoted the sonolysis,and kapp declined with the further concentration increasing.The kapp varied little when the pH value ranged from 3.10 to 10.28.It may be concluded that mechanical and pyrolysis process played main roles on the degradation of chlorothalonil in ultrasonic irradiation rather than ·OH attack.The electrical energy per order(EEo) values for sonolysis degradation of CLT were also calculated to evaluate the cost of the process.展开更多
Activated carbon(AC) was prepared from surplus sludge using chemical activation method with the assistance of ZnCl2. The influences of process parameters on the AC's specific surface area and adsorption capacity f...Activated carbon(AC) was prepared from surplus sludge using chemical activation method with the assistance of ZnCl2. The influences of process parameters on the AC's specific surface area and adsorption capacity for Pb2+ were examined to optimize these parameters. The optimal conditions for the preparation of AC were determined to be activation temperature of 500 °C, activation time of 1 h, impregnation ratio of 1:1(solid-to-liquid volume) with the 30% ZnCl2 solution(mass fraction), giving the BET surface area of 393.85 m2/g and yield of 30.14% with 33.45% ash. Also, the pyrolysis temperature was found to be the most important parameter in chemical activation. FTIR spectra provided the evidence of some surface structures such as C=C and C—O—C. In the adsorption studies, a rise in solution pH led to a significant increase in adsorption capacity when the pH value varied from 3.0 to 7.0, and the optimal pH for removal of Pb2+ was 7.0. It was observed that the pseudo-second-order equation provided better correlation for the adsorption rate than the pseudo-first-order and the Langmuir model fitted better than the Freundlich model for adsorption isotherm. The adsorption capacity of AC to Pb2+ was 11.75 mg/L at solution pH 7.0, the equilibrium time 480 min and 25 °C. Moreover, the adsorption process is endothermic according to the value of enthalpy change.展开更多
基金Project(52174385)supported by the National Natural Science Foundation of ChinaProjects(2023YFC3904003,2023YFC3904004,2023YFC390400501)supported by the National Key R&D Program of China。
文摘Copper is a strategic metal that plays an important role in many industries.In copper metallurgy,electrolytic refining is essential to obtain high-purity copper.However,during the electrolytic refining process,impurities such as arsenic are introduced into the electrolyte,which significantly affect the subsequent production and quality of copper products.This paper first discusses the sources,forms,and transformation pathways of arsenic in copper electrolyte during the electrolytic process,then reviews various arsenic removal technologies in detail,including electrowinning,adsorption,solvent extraction,ion exchange,membrane filtration,and precipitation.Particular emphasis is placed on electrowinning,which is the most widely used and mature among these arsenic removal techniques.The paper evaluates these methods based on arsenic removal efficiency,cost effectiveness,technical maturity,environmental friendliness,and operation simplicity.In addition,the paper explores future trends in copper electrolyte purification,focusing on waste reduction at source,resource utilization,intelligent digitalization,and innovations in materials and processes.This review aims to provide researchers and practitioners with a comprehensive and in-depth reference on arsenic removal methods in copper electrolytes.
基金Project(50621063) supported by the National Nature Science Foundation of ChinaProject(NCET-06-0691) supported by the Program for New Century Excellent Talents in University
文摘Di-n-butyl phthalate (DBP),one of phthalate acid esters (PAEs),was investigated to determine its biodegradation rate using Xiangjiang River sediment and find potential DBP degraders in the enrichment culture of the sediment. The sediment sample was incubated with an initial concentration of DBP of 100 mg/L for 5 d. The biodegradation rate of DBP was detected using HPLC and the degraded products were analyzed by GC/MS. Subsequently,the microbial diversity of the enrichment culture was analyzed by polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). The results reveal that almost 100% of DBP is degraded after merely 3 d,generating two main degraded products:mono-butyl phthalate (MBP) and 9-octadecenoic acid. After a six-month enrichment period under the pressure of DBP,the dominant family in the final enrichment culture is clustered with the Comamonas sp.,the remaining are affiliated with Sphingomonas sp.,Hydrogenophaga sp.,Rhizobium sp.,and Acidovorax sp. The results show the potential of these bacteria to be used in the bioremediation of DBP in the environment.
基金Project(2008ZX07421-002) supported by the National Major Project of Science & Technology Ministry of ChinaProject(2008AA06A412) supported by the National High Technology Research and Development Program of ChinaProject(20009-K7-4) supported by the Research and Development of Ministry of Housing and Urban-Rural Development of China
文摘Factors on degradation of chlorothalonil(CLT) in water by high frequency ultrasonic irradiation were investigated.The effects of initial concentration of chlorothalonil,dosages of tertiary butyl alcohol,humic acid and initial pH value on degradation of chlorothalonil,as well as the reaction mechanism were studied.The results reveal that chlorothalonil could be effectively degradated by ultrasonic irradiation.The reaction constant value kapp decreased from 0.014 1 to 0.010 2 min-1 with the initial concentration increasing from 50 to 400 μg/L during 180 min irradiation.Tertiary butyl alcohol had negative effect on chlorothalonil degradation,while lower concentration of humic acid promoted the sonolysis,and kapp declined with the further concentration increasing.The kapp varied little when the pH value ranged from 3.10 to 10.28.It may be concluded that mechanical and pyrolysis process played main roles on the degradation of chlorothalonil in ultrasonic irradiation rather than ·OH attack.The electrical energy per order(EEo) values for sonolysis degradation of CLT were also calculated to evaluate the cost of the process.
基金Project supported by the Open Fund of State Key Laboratory of Photocatalysis,China
文摘Activated carbon(AC) was prepared from surplus sludge using chemical activation method with the assistance of ZnCl2. The influences of process parameters on the AC's specific surface area and adsorption capacity for Pb2+ were examined to optimize these parameters. The optimal conditions for the preparation of AC were determined to be activation temperature of 500 °C, activation time of 1 h, impregnation ratio of 1:1(solid-to-liquid volume) with the 30% ZnCl2 solution(mass fraction), giving the BET surface area of 393.85 m2/g and yield of 30.14% with 33.45% ash. Also, the pyrolysis temperature was found to be the most important parameter in chemical activation. FTIR spectra provided the evidence of some surface structures such as C=C and C—O—C. In the adsorption studies, a rise in solution pH led to a significant increase in adsorption capacity when the pH value varied from 3.0 to 7.0, and the optimal pH for removal of Pb2+ was 7.0. It was observed that the pseudo-second-order equation provided better correlation for the adsorption rate than the pseudo-first-order and the Langmuir model fitted better than the Freundlich model for adsorption isotherm. The adsorption capacity of AC to Pb2+ was 11.75 mg/L at solution pH 7.0, the equilibrium time 480 min and 25 °C. Moreover, the adsorption process is endothermic according to the value of enthalpy change.
