Coal mine belt fire develops very rapidly and is difficult to control. If not suppressed quickly, a belt fire could easily lead to airflow disorder and undermine the ventilation system. However, belt fire can be preve...Coal mine belt fire develops very rapidly and is difficult to control. If not suppressed quickly, a belt fire could easily lead to airflow disorder and undermine the ventilation system. However, belt fire can be prevented effectively by establishing fire airflow control system. In this work, the 5th belt roadway of Kongzhuang coal mine was taken as the object of investigation, where geometrical models of this roadway were established firstly. Then, based on mathematical model of fire smoke flow, the CO volume fraction, smoke density distribution, air temperature and pollutant velocity vector in the roadway before and after taking airflow control measures were simulated by using Fluent software. It can be known from the simulation that with the normal ventilation status in 5th belt roadway, the countercurrent of smoke does not happen when a fire occurs; the roadway's section is almost filled with CO at 10 m downstream from the fire source, and with air velocity getting stable gradually, the CO concentration reaches about 15 %. After taking airflow control measures, the effect range of temperature field which are harmful to the miners decreases from 69 m to 30 m; and the distance of the roadway fully filled with CO is 5 m farther than that before taking measures. Finally, according to the numerical simulation results and the actual condition of the belt roadway, the warning and automatic remote airflow control system with short-circuit method for the 5th belt roadway was designed to guarantee the safety production.展开更多
Roof pre-splitting is an effective method to control the roof with potential rock burst risk.In this study,three-point bending tests were carried out by using fine sandstone specimens with different pre-cracked length...Roof pre-splitting is an effective method to control the roof with potential rock burst risk.In this study,three-point bending tests were carried out by using fine sandstone specimens with different pre-cracked lengths as test objects,and digital speckle correlation method(DSCM)and acoustic emission(AE)technology were used to track the entire process of crack propagation.The effect of pre-cracks on the fracture of rock beams was evaluated,and the mechanical mechanism of the rock beam fracture process was analyzed.The rock beam pre-splitting design method was developed,and the application effect of the method was proved by the microseismic monitoring data obtained from the 10303 working face of Jining No.2 coal mine in China.The results show that the loading time history curve of pre-cracked beams exhibits obvious residual characteristics.Compared with the intact rock beam,the tensile strength,and maximum tensile strain of 35 mm pre-cracked rock beam are decreased by 32.4% and 33.1%,respectively and the acoustic emission b value is increased by 30.2%.According to the pre-splitting design method of rock beam,the maximum and average microseismic energy of the 10303 working face after pre-splitting construction are reduced by 25.6% and 6.4%,respectively,with excellent prevention and control effect of thick roof.展开更多
During the construction and operation of the abandoned mine pumped storage power station,the underground space surrounding rock body faces the complex stress environment under the action of mining disturbance,frequent...During the construction and operation of the abandoned mine pumped storage power station,the underground space surrounding rock body faces the complex stress environment under the action of mining disturbance,frequent pumping,water storage and other dynamic disturbances.The stability of the abandoned mine surrounding rock body is the basis for guaranteeing the safety and effectiveness of water storage in the underground space of the abandoned mine.By considering the two main factors of different stress levels and disturbance amplitudes,the mechanical properties,damage characteristics and acoustic emission characteristics of the abandoned mine perimeter rock body under dynamic disturbance were investigated using a creep-disturbed dynamic impact loading system.The experimental results show that:1)The stress level is considered to be the major contributing factor of the failure of muddy sandstone,followed by the amplitude of the disturbances;2)The time required for the destruction of muddy sandstone decreases with the increase of amplitude.When the stress level is 80%,the sandstone specimens have a decreasing number of cycles as the disturbance amplitude increases.The disturbance amplitude is sequentially increased from 4 MPa to 5,6,7,and 8 MPa,the number of cycles required for specimen destruction decreases significantly by 96.71%,99.13%,99.60%,and 99.93%,respectively;3)Disturbance amplitude and stress level have a significant effect on muddy sandstone damage and damage occurs only after a certain threshold is reached.With the increase of stress level and disturbance amplitude,the macroscopic damage of muddy sandstone is mainly conical,with obvious flake spalling and poor damage integrity;4)According to the time-dependent changes in AE energy and ringing counts,the acoustic emission activity during the failure process could be divided into three phases,namely,weakening period,smooth period,and surge period,corresponding to the compaction phase,elastic rise phase and post-peak damage phase.The research results are of reference significance for the damage evolution analysis of muddy sandstone under dynamic disturbance and the safety and stability of abandoned mine perimeter rock body.展开更多
In practical engineering applications,rock mass are often found to be subjected to a triaxial stress state.Concurrently,defects like joints and fractures have a notable impact on the mechanical behavior of rock mass.S...In practical engineering applications,rock mass are often found to be subjected to a triaxial stress state.Concurrently,defects like joints and fractures have a notable impact on the mechanical behavior of rock mass.Such defects are identified as crucial contributors to the failure and instability of the surrounding rock,subsequently impacting the engineering stability.The study aimed to investigate the impact of fracture geometry and confining pressure on the deformation,failure characteristics,and strength of specimens using sand powder 3D printing technology and conventional triaxial compression tests.The results indicate that the number of fractures present considerably influences the peak strength,axial peak strain and elastic modulus of the specimens.Confining pressure is an important factor affecting the failure pattern of the specimen,under which the specimen is more prone to shear failure,but the initiation,expansion and penetration processes of secondary cracks in different fracture specimens are different.This study confirmed the feasibility of using sand powder 3D printing specimens as soft rock analogs for triaxial compression research.The insights from this research are deemed essential for a deeper understanding of the mechanical behavior of fractured surrounding rocks when under triaxial stress state.展开更多
In actual production,deep coal mine roadways are often under typical static-dynamic coupling stress(SDCS)conditions with high ground stress and strong dynamic disturbances.With the increasing number of disasters and a...In actual production,deep coal mine roadways are often under typical static-dynamic coupling stress(SDCS)conditions with high ground stress and strong dynamic disturbances.With the increasing number of disasters and accidents induced by SDCS conditions,the safe and efficient production of coal mines is seriously threatened.Therefore,it is of great practical significance to study the deformation and failure characteristics of the roadway surrounding rock under SDCS.In this paper,the effects of different in-situ stress fields and dynamic load conditions on the surrounding rock are studied by numerical simulations,and the deformation and failure characteristics are obtained.According to the simulation results,the horizontal stress,vertical stress and dynamic disturbance have a positive correlation with the plastic failure of the surrounding rock.Among these factors,the influence of the dynamic disturbance is the most substantial.Under the same stress conditions,the extents of deformation and plastic failure of the roof and ribs are always greater than those of the floor.The effect of horizontal stresses on the roadway deformation is more notable than that of vertical stresses.The results indicate that for the roadway under high-stress conditions,the in-situ stress test must be strengthened first.After determining the magnitude of the in-situ stress,the location of the roadway should be reasonably arranged in the design to optimize the mining sequence.For roadways that are strongly disturbed by dynamic loads,rock supports(rebar/cable bolts,steel set etc.)that are capable of maintaining their effectiveness without failure after certain dynamic loads are required.The results of this study contribute to understanding the characteristics of the roadway deformation and failure under SDCS,and can be used to provide a basis for the support design and optimization under similar geological and geotechnical circumstances.展开更多
The deformation and failure of coal and rock is energy-driving results according to thermodynamics.It is important to study the strain energy characteristics of coal-rock composite samples to better understand the def...The deformation and failure of coal and rock is energy-driving results according to thermodynamics.It is important to study the strain energy characteristics of coal-rock composite samples to better understand the deformation and failure mechanism of of coal-rock composite structures.In this research,laboratory tests and numerical simulation of uniaxial compressions of coal-rock composite samples were carried out with five different loading rates.The test results show that strength,deformation,acoustic emission(AE)and energy evolution of coal-rock composite sample all have obvious loading rate effects.The uniaxial compressive strength and elastic modulus increase with the increase of loading rate.And with the increase of loading rate,the AE energy at the peak strength of coal-rock composites increases first,then decreases,and then increases.With the increase of loading rate,the AE cumulative count first decreases and then increases.And the total absorption energy and dissipation energy of coal-rock composite samples show non-linear increasing trends,while release elastic strain energy increases first and then decreases.The laboratory experiments conducted on coal-rock composite samples were simulated numerically using the particle flow code(PFC).With careful selection of suitable material constitutive models for coal and rock,and accurate estimation and calibration of mechanical parameters of coal-rock composite sample,it was possible to obtain a good agreement between the laboratory experimental and numerical results.This research can provide references for understanding failure of underground coalrock composite structure by using energy related measuring methods.展开更多
The stability control of surrounding rock for large or super-large section chamber is a difficult technical problem in deep mining condition.Based on the in-site geological conditions of Longgu coal mine,this paper us...The stability control of surrounding rock for large or super-large section chamber is a difficult technical problem in deep mining condition.Based on the in-site geological conditions of Longgu coal mine,this paper used the dynamic module of FLAC3D to study the response characteristics of deep super-large section chamber under dynamic and static combined loading condition.Results showed that under the static loading condition,the maximum vertical stress,deformation and failure range are large,where the stress concentration coefficient is 1.64.The maximum roof-to-floor and two-sides deformations are 54.6 mm and 53.1 mm,respectively.Then,under the dynamic and static combined loading condition:(1)The influence of dynamic load frequency on the two-sides is more obvious;(2)The dynamic load amplitude has the greatest influence on the stress concentration degree,and the plastic failure tends to develop to the deeper;(3)With the dynamic load source distance increase,the response of surrounding rock is gradually attenuated.On this basis,empirical equations for each dynamic load conditions were obtained by using regression analysis method,and all correlation coefficients are greater than 0.99.This research provided reference for the supporting design of deep super-large section chamber under same or similar conditions.展开更多
To research the anchoring effect of large deformation bolt,tensile and drawing models are established.Then,the evolution laws of drawing force,bolt axial force and interfacial shear stress are analyzed.Additionally,th...To research the anchoring effect of large deformation bolt,tensile and drawing models are established.Then,the evolution laws of drawing force,bolt axial force and interfacial shear stress are analyzed.Additionally,the influence of structure element position on the anchoring effect of large deformation bolt is discussed.At last,the energy-absorbing support mechanism is discussed.Results show that during the drawing process of normal bolt,drawing force,bolt axial force and interfacial shear stress all gradually increase as increasing the drawing displacement,but when the large deformation bolt enters the structural deformation stage,these three values will keep stable;when the structure element of large deformation bolt approaches the drawing end,the fluctuation range of drawing force decreases,the distributions of bolt axial force and interfacial shear stress of anchorage section are steady and the increasing rate of interfacial shear stress decreases,which are advantageous for keeping the stress stability of the anchorage body.During the working process of large deformation bolt,the strain of bolt body is small,the working resistance is stable and the distributions of bolt axial force and interfacial shear stress are steady.When a rock burst event occurs,the bolt and bonding interface cannot easily break,which weakens the dynamic disaster degree.展开更多
The deformation of soft rock roadway caused by floor heave is a major challenge for coal mines in China western mining areas. To achieve security and stability of soft rock roadway, this work considered the headgate a...The deformation of soft rock roadway caused by floor heave is a major challenge for coal mines in China western mining areas. To achieve security and stability of soft rock roadway, this work considered the headgate at panel 11505 of the Yushujing Coal Mine as background. First, based on the limit equilibrium method and slip line field theory,a model of floor heave was established, the mechanism of floor heave control was analyzed, and an optimized support method was proposed. Then, the displacement, stress and failure zones around the surrounding rock with the original and optimized support were studied by FLAC. Finally, the serviceability of the support method was verified by field application. The results showed that the main deformation form of soft rock roadway is floor heave, and 0.5 m is relatively reasonable thicknesses of the inverted arch. The extrusion failure zone and shear failure zone were mainly affected by tensile and shear failure, respectively. The modification of floor and the effective support are key points. The failure zone was consistent between numerical simulation and theoretical calculation. The maximum convergences of floor heave determined by numerical simulation and field measurement were 220 mm and 240 mm, respectively, which were reduced by 55% and 60% compared with the original support, and the convergence between sidewalls decreased considerably. The optimized support method controls the floor heave well.展开更多
Anchoring mechanism and failure characteristics of composite soft rock with weak interface usually exhibit remarkable difference from those in single rock mass.In order to fully understand the reinforcement mechanism ...Anchoring mechanism and failure characteristics of composite soft rock with weak interface usually exhibit remarkable difference from those in single rock mass.In order to fully understand the reinforcement mechanism of composite soft roof in western mining area of China,a mechanical model of composite soft rock with weak interface and rock bolt which considering the transverse shear sliding between different rock layers was established firstly.The anchoring effect was quantified by a factor defined as anchoring effect coefficient and its evolution equation was further deduced based on the deformation relationship and homogenized distribution assumption of stress acting on composite structure.Meanwhile,the numerical simulation model of composite soft rock with shear joint was prompted by finite element method.Then detailed analysis were carried out for the deformation features,stress distribution and failure behavior of rock mass and rock bolt near the joint under transverse load.The theoretical result indicates that the anchoring effect of rock-bolt through weak joint changes with the working status of rock mass and closely relates with the physical and geometric parameters of rock mass and rock bolt.From the numerical results,the bending deformation of rock bolt accurately characterized by Doseresp model is mainly concentrated between two plastic hinges near the shear joint.The maximum tensile and compression stresses distribute in the plastic hinge.However,the maximum shear stress appears at the positions of joint surface.The failure zones of composite rock are produced firstly at the joint surface due to the reaction of rock bolt.The above results laid a theoretical and computational foundation for further study of anchorage failure in composite soft rock.展开更多
In China,Beishan granite is chosen as a potential host surrounding rock of a high-level radioactive waste(HLW)repository.For this research,Beishan granite specimens were heated up to 300℃,400℃ and 500℃,respectively...In China,Beishan granite is chosen as a potential host surrounding rock of a high-level radioactive waste(HLW)repository.For this research,Beishan granite specimens were heated up to 300℃,400℃ and 500℃,respectively.And conventional triaxial compression tests were conducted after cooling down the samples.The results show that after 300℃,400℃ and 500℃ heating treatment,the diameter of samples increases by 0.066%,0.143%and 0.409%,respectively,which is a little larger than the axial length changes.Mechanical tests show that peak strength increases slightly with increasing temperature.However,the dilatancy threshold is lower than that observed for samples which have not experienced heating treatment.Peak strain and dilatancy threshold strain show a strong temperature dependence.The higher the temperature,the greater the strain.Furthermore,increasing temperature has negative influence on threshold elastic modulus E_(c) and tangent elastic modulus E_(t).Poisson ratio decreases when temperature increases from 300℃ to 500℃,but it is still larger than that observed for samples which have not experienced heating treatment.In addition,AE monitoring shows a quiet period in the initial loading stage,which proves that the micro cracks are closed during heating and contribute to the increase of peak strength.展开更多
Strainburst is one type of rockburst that generally occurs in deep tunnel.In this study,the strainburst behaviors of marble specimens were investigated under tunnel-excavation-induced stress condition,and two stress p...Strainburst is one type of rockburst that generally occurs in deep tunnel.In this study,the strainburst behaviors of marble specimens were investigated under tunnel-excavation-induced stress condition,and two stress paths were designed,a commonly used stress path in true triaxial unloading rockburst tests and a new test path in which the intermediate principal stress was varied.During the tests,a high-speed camera was used to record the strainburst process,and an acoustic emission(AE)monitoring system was used to monitor the AE characteristics of failure.In these two stress paths,all the marble specimens exhibited strainbursts;however,when the intermediate principal stress was varied,the rockburst became more violent.The obtained results indicate that the intermediate principal stress has a significant effect on rockburst behavior of marble.Under a higher intermediate principal stress before the unloading,more elastic strain energy was accumulated in the specimen,and the cumulative AE energy was higher in the rockburst-induced failure,i.e.,more elastic strain energy was released during the failure.Therefore,more violent failure was observed:more rock fragments with a higher mass and larger size were ejected outward.展开更多
Lots of field investigations have proven that layer-crack structure usually appears during the excavation process of deep rock or coal mass.To provide experimental data for studying the formation mechanism of layer-cr...Lots of field investigations have proven that layer-crack structure usually appears during the excavation process of deep rock or coal mass.To provide experimental data for studying the formation mechanism of layer-crack structure,this study researches the influence of lateral pressure on the mechanical behavior of different rock types.Four rock types have been tested and the formation mechanism of macro-fracture surface is analyzed.Results indicate that the brittleness and burst proneness of rock or coal material are stronger than that of gypsum material due to the different mineral compositions and structures.When the lateral pressure is less than 10%uniaxial strength,the peak stress and elastic modulus increase with the increase of lateral pressure;but when the lateral pressure is larger than 10%uniaxial strength,the two parameters decrease slightly or keep steady.This is because when the lateral pressure reaches a certain value,local failure will be formed during the process of applying lateral pressure.Under the condition of low lateral pressure,the failure of the specimen is dominated by the tensile mechanism;under the condition of relatively high lateral pressure,the area of the specimen close to the free surface is tensile splitting failure,and the area far from the free surface is shear failure.展开更多
The onset times of acoustic signals with spikes,heavy bodies and unclear takeoffs are difficult to be picked accurately by the automatic method at present.To deal with this problem,an improved joint method based on th...The onset times of acoustic signals with spikes,heavy bodies and unclear takeoffs are difficult to be picked accurately by the automatic method at present.To deal with this problem,an improved joint method based on the discrete wavelet transform(DWT),modified energy ratio(MER)and Akaike information criterion(AIC)pickers,has been proposed in this study.First,the DWT is used to decompose the signal into various components.Then,the joint application of MER and AIC pickers is carried out to pick the initial onset times of all selected components,where the minimum AIC position ahead of MER onset time is regarded as the initial onset time.Last,the average for initial onset times of all selected components is calculated as the final onset time of this signal.This improved joint method is tested and validated by the acoustic signals with different signal to noise ratios(SNRs)and waveforms.The results show that the improved joint method is not affected by the variations of SNR,and the onset times picked by this method are always accurate in different SNRs.Moreover,the onset times of all acoustic signals with spikes,heavy bodies and unclear takeoffs can be accurately picked by the improved joint method.Compared to some other methods including MER,AIC,DWT-MER and DWT-AIC,the improved joint method has better SNR stabilities and waveform adaptabilities.展开更多
Soft and medium-hard rocks are subjected to high rheology under high stress,and they are prone to a relatively large-degree of deformation when perturbed by external impacting loads.The phenomenon where rock deformati...Soft and medium-hard rocks are subjected to high rheology under high stress,and they are prone to a relatively large-degree of deformation when perturbed by external impacting loads.The phenomenon where rock deformation is developed due to external impacting perturbation in the rheological state is defined as the rock rheological perturbation effect.This work presents a new experimental system for investigating the rock rheological perturbation effect with experiments on medium-hard red sandstone.Results from our analysis show that red sandstone changes under two mechanical mechanisms:deformation-hardening effects at low stress states,and damage-fracture effects at high stress states when impacted by certain external impacting loads.Red sandstone tested in our experiments has a strain threshold of about 90% of the ultimate strain under the perturbation effect;the red sandstone is sensitive to a perturbed load when its actual strain exceeds the threshold.The perturbed deformation process of the rock can be divided into three phases:decline,approximately constant speed and acceleration.The rock will be rapidly destroyed when the perturbed deformation accumulates to a certain degree.The perturbation effect of rock deformation under uniaxial compression is more obvious than that under axial compression.Based on our experiment,a constitutive relation of the rock rheological perturbation effect is developed.展开更多
基金Project supported by Joint Innovative Center for Safe and Effective Mining Technology and Equipment of Coal Resources of Shandong Province,ChinaProject supported by Taishan Scholar Program of Shandong Province,China+2 种基金Project(2014JQJH106)supported by Shandong University of Science and Technology Research Fund,ChinaProject(LAK2012-1)supported by Science and Technology Development Program of Safety Production of Shandong Province,ChinaProject(2012ZHTD06)supported by Science Research Innovative Group of College of Mining and Safety Engineering of Shandong University of Science and Technology,China
文摘Coal mine belt fire develops very rapidly and is difficult to control. If not suppressed quickly, a belt fire could easily lead to airflow disorder and undermine the ventilation system. However, belt fire can be prevented effectively by establishing fire airflow control system. In this work, the 5th belt roadway of Kongzhuang coal mine was taken as the object of investigation, where geometrical models of this roadway were established firstly. Then, based on mathematical model of fire smoke flow, the CO volume fraction, smoke density distribution, air temperature and pollutant velocity vector in the roadway before and after taking airflow control measures were simulated by using Fluent software. It can be known from the simulation that with the normal ventilation status in 5th belt roadway, the countercurrent of smoke does not happen when a fire occurs; the roadway's section is almost filled with CO at 10 m downstream from the fire source, and with air velocity getting stable gradually, the CO concentration reaches about 15 %. After taking airflow control measures, the effect range of temperature field which are harmful to the miners decreases from 69 m to 30 m; and the distance of the roadway fully filled with CO is 5 m farther than that before taking measures. Finally, according to the numerical simulation results and the actual condition of the belt roadway, the warning and automatic remote airflow control system with short-circuit method for the 5th belt roadway was designed to guarantee the safety production.
基金Project(2019SDZY02)supported by Major Scientific and Technological Innovation Project of Shandong Provincial Key Research Development Program,ChinaProject(ZR2019ZD13)supported by Major Program of Shandong Provincial Natural Science Foundation,ChinaProject(52274086)supported by the National Natural Science Foundation of China。
文摘Roof pre-splitting is an effective method to control the roof with potential rock burst risk.In this study,three-point bending tests were carried out by using fine sandstone specimens with different pre-cracked lengths as test objects,and digital speckle correlation method(DSCM)and acoustic emission(AE)technology were used to track the entire process of crack propagation.The effect of pre-cracks on the fracture of rock beams was evaluated,and the mechanical mechanism of the rock beam fracture process was analyzed.The rock beam pre-splitting design method was developed,and the application effect of the method was proved by the microseismic monitoring data obtained from the 10303 working face of Jining No.2 coal mine in China.The results show that the loading time history curve of pre-cracked beams exhibits obvious residual characteristics.Compared with the intact rock beam,the tensile strength,and maximum tensile strain of 35 mm pre-cracked rock beam are decreased by 32.4% and 33.1%,respectively and the acoustic emission b value is increased by 30.2%.According to the pre-splitting design method of rock beam,the maximum and average microseismic energy of the 10303 working face after pre-splitting construction are reduced by 25.6% and 6.4%,respectively,with excellent prevention and control effect of thick roof.
基金Project(52204101)supported by the National Natural Science Foundation of ChinaProject(ZR2022QE137)supported by the Natural Science Foundation of Shandong Province,ChinaProject(SKLGDUEK2023)supported by the Open Project of State Key Laboratory for Geomechanics and Deep Underground Engineering in China University of Mining&Technology,Beijing,China。
文摘During the construction and operation of the abandoned mine pumped storage power station,the underground space surrounding rock body faces the complex stress environment under the action of mining disturbance,frequent pumping,water storage and other dynamic disturbances.The stability of the abandoned mine surrounding rock body is the basis for guaranteeing the safety and effectiveness of water storage in the underground space of the abandoned mine.By considering the two main factors of different stress levels and disturbance amplitudes,the mechanical properties,damage characteristics and acoustic emission characteristics of the abandoned mine perimeter rock body under dynamic disturbance were investigated using a creep-disturbed dynamic impact loading system.The experimental results show that:1)The stress level is considered to be the major contributing factor of the failure of muddy sandstone,followed by the amplitude of the disturbances;2)The time required for the destruction of muddy sandstone decreases with the increase of amplitude.When the stress level is 80%,the sandstone specimens have a decreasing number of cycles as the disturbance amplitude increases.The disturbance amplitude is sequentially increased from 4 MPa to 5,6,7,and 8 MPa,the number of cycles required for specimen destruction decreases significantly by 96.71%,99.13%,99.60%,and 99.93%,respectively;3)Disturbance amplitude and stress level have a significant effect on muddy sandstone damage and damage occurs only after a certain threshold is reached.With the increase of stress level and disturbance amplitude,the macroscopic damage of muddy sandstone is mainly conical,with obvious flake spalling and poor damage integrity;4)According to the time-dependent changes in AE energy and ringing counts,the acoustic emission activity during the failure process could be divided into three phases,namely,weakening period,smooth period,and surge period,corresponding to the compaction phase,elastic rise phase and post-peak damage phase.The research results are of reference significance for the damage evolution analysis of muddy sandstone under dynamic disturbance and the safety and stability of abandoned mine perimeter rock body.
基金Project(2021YFC2900600)supported by the Young Scientist Project of National Key Research and Development Program of ChinaProject(52074166)supported by the National Natural Science Foundation of China+1 种基金Projects(ZR2021YQ38,ZR2020QE121)supported by the Natural Science Foundation of Shandong Province,ChinaProject(2022KJ101)supported by the Science and Technology Support Plan for Youth Innovation of Colleges and Universities in Shandong Province,China。
文摘In practical engineering applications,rock mass are often found to be subjected to a triaxial stress state.Concurrently,defects like joints and fractures have a notable impact on the mechanical behavior of rock mass.Such defects are identified as crucial contributors to the failure and instability of the surrounding rock,subsequently impacting the engineering stability.The study aimed to investigate the impact of fracture geometry and confining pressure on the deformation,failure characteristics,and strength of specimens using sand powder 3D printing technology and conventional triaxial compression tests.The results indicate that the number of fractures present considerably influences the peak strength,axial peak strain and elastic modulus of the specimens.Confining pressure is an important factor affecting the failure pattern of the specimen,under which the specimen is more prone to shear failure,but the initiation,expansion and penetration processes of secondary cracks in different fracture specimens are different.This study confirmed the feasibility of using sand powder 3D printing specimens as soft rock analogs for triaxial compression research.The insights from this research are deemed essential for a deeper understanding of the mechanical behavior of fractured surrounding rocks when under triaxial stress state.
基金Projects(52074166,51774195,51704185)supported by the National Natural Science Foundation of ChinaProject(2019M652436)supported by the China Postdoctoral Science Foundation。
文摘In actual production,deep coal mine roadways are often under typical static-dynamic coupling stress(SDCS)conditions with high ground stress and strong dynamic disturbances.With the increasing number of disasters and accidents induced by SDCS conditions,the safe and efficient production of coal mines is seriously threatened.Therefore,it is of great practical significance to study the deformation and failure characteristics of the roadway surrounding rock under SDCS.In this paper,the effects of different in-situ stress fields and dynamic load conditions on the surrounding rock are studied by numerical simulations,and the deformation and failure characteristics are obtained.According to the simulation results,the horizontal stress,vertical stress and dynamic disturbance have a positive correlation with the plastic failure of the surrounding rock.Among these factors,the influence of the dynamic disturbance is the most substantial.Under the same stress conditions,the extents of deformation and plastic failure of the roof and ribs are always greater than those of the floor.The effect of horizontal stresses on the roadway deformation is more notable than that of vertical stresses.The results indicate that for the roadway under high-stress conditions,the in-situ stress test must be strengthened first.After determining the magnitude of the in-situ stress,the location of the roadway should be reasonably arranged in the design to optimize the mining sequence.For roadways that are strongly disturbed by dynamic loads,rock supports(rebar/cable bolts,steel set etc.)that are capable of maintaining their effectiveness without failure after certain dynamic loads are required.The results of this study contribute to understanding the characteristics of the roadway deformation and failure under SDCS,and can be used to provide a basis for the support design and optimization under similar geological and geotechnical circumstances.
基金Projects(51774196,51804181,51874190)supported by the National Natural Science Foundation of ChinaProject(2019GSF111020)supported by the Key R&D Program of Shandong Province,ChinaProject(201908370205)supported by the China Scholarship Council。
文摘The deformation and failure of coal and rock is energy-driving results according to thermodynamics.It is important to study the strain energy characteristics of coal-rock composite samples to better understand the deformation and failure mechanism of of coal-rock composite structures.In this research,laboratory tests and numerical simulation of uniaxial compressions of coal-rock composite samples were carried out with five different loading rates.The test results show that strength,deformation,acoustic emission(AE)and energy evolution of coal-rock composite sample all have obvious loading rate effects.The uniaxial compressive strength and elastic modulus increase with the increase of loading rate.And with the increase of loading rate,the AE energy at the peak strength of coal-rock composites increases first,then decreases,and then increases.With the increase of loading rate,the AE cumulative count first decreases and then increases.And the total absorption energy and dissipation energy of coal-rock composite samples show non-linear increasing trends,while release elastic strain energy increases first and then decreases.The laboratory experiments conducted on coal-rock composite samples were simulated numerically using the particle flow code(PFC).With careful selection of suitable material constitutive models for coal and rock,and accurate estimation and calibration of mechanical parameters of coal-rock composite sample,it was possible to obtain a good agreement between the laboratory experimental and numerical results.This research can provide references for understanding failure of underground coalrock composite structure by using energy related measuring methods.
基金Project(2018YFC0604703)supported by the National Key R&D Program of ChinaProjects(51804181,51874190)supported by the National Natural Science Foundation of China+3 种基金Project(ZR2018QEE002)supported by the Shandong Province Natural Science Fund,ChinaProject(ZR2018ZA0603)supported by the Major Program of Shandong Province Natural Science Foundation,ChinaProject(2019GSF116003)supported by the Key R&D Project of Shandong Province,ChinaProject(SDKDYC190234)supported by the Shandong University of Science and Technology,Graduate Student Technology Innovation Project,China。
文摘The stability control of surrounding rock for large or super-large section chamber is a difficult technical problem in deep mining condition.Based on the in-site geological conditions of Longgu coal mine,this paper used the dynamic module of FLAC3D to study the response characteristics of deep super-large section chamber under dynamic and static combined loading condition.Results showed that under the static loading condition,the maximum vertical stress,deformation and failure range are large,where the stress concentration coefficient is 1.64.The maximum roof-to-floor and two-sides deformations are 54.6 mm and 53.1 mm,respectively.Then,under the dynamic and static combined loading condition:(1)The influence of dynamic load frequency on the two-sides is more obvious;(2)The dynamic load amplitude has the greatest influence on the stress concentration degree,and the plastic failure tends to develop to the deeper;(3)With the dynamic load source distance increase,the response of surrounding rock is gradually attenuated.On this basis,empirical equations for each dynamic load conditions were obtained by using regression analysis method,and all correlation coefficients are greater than 0.99.This research provided reference for the supporting design of deep super-large section chamber under same or similar conditions.
基金Project(2019SDZY02)supported by the Major Scientific and Technological Innovation Project of Shandong Provincial Key Research Development Program,ChinaProject(51904165)supported by the National Natural Science Foundation of ChinaProject(ZR2019QEE026)supported by the Shandong Provincial Natural Science Foundation,China。
文摘To research the anchoring effect of large deformation bolt,tensile and drawing models are established.Then,the evolution laws of drawing force,bolt axial force and interfacial shear stress are analyzed.Additionally,the influence of structure element position on the anchoring effect of large deformation bolt is discussed.At last,the energy-absorbing support mechanism is discussed.Results show that during the drawing process of normal bolt,drawing force,bolt axial force and interfacial shear stress all gradually increase as increasing the drawing displacement,but when the large deformation bolt enters the structural deformation stage,these three values will keep stable;when the structure element of large deformation bolt approaches the drawing end,the fluctuation range of drawing force decreases,the distributions of bolt axial force and interfacial shear stress of anchorage section are steady and the increasing rate of interfacial shear stress decreases,which are advantageous for keeping the stress stability of the anchorage body.During the working process of large deformation bolt,the strain of bolt body is small,the working resistance is stable and the distributions of bolt axial force and interfacial shear stress are steady.When a rock burst event occurs,the bolt and bonding interface cannot easily break,which weakens the dynamic disaster degree.
基金Project(51974174) supported by the National Natural Science Foundation of ChinaProject(ZR2019YQ26) supported by the Natural Science Foundation of Shandong Province (Excellent Youth Fund),China。
文摘The deformation of soft rock roadway caused by floor heave is a major challenge for coal mines in China western mining areas. To achieve security and stability of soft rock roadway, this work considered the headgate at panel 11505 of the Yushujing Coal Mine as background. First, based on the limit equilibrium method and slip line field theory,a model of floor heave was established, the mechanism of floor heave control was analyzed, and an optimized support method was proposed. Then, the displacement, stress and failure zones around the surrounding rock with the original and optimized support were studied by FLAC. Finally, the serviceability of the support method was verified by field application. The results showed that the main deformation form of soft rock roadway is floor heave, and 0.5 m is relatively reasonable thicknesses of the inverted arch. The extrusion failure zone and shear failure zone were mainly affected by tensile and shear failure, respectively. The modification of floor and the effective support are key points. The failure zone was consistent between numerical simulation and theoretical calculation. The maximum convergences of floor heave determined by numerical simulation and field measurement were 220 mm and 240 mm, respectively, which were reduced by 55% and 60% compared with the original support, and the convergence between sidewalls decreased considerably. The optimized support method controls the floor heave well.
基金Projects(51774196,41472280,51578327)supported by the National Natural Science Foundation of ChinaProject(2016M592221)supported by the China Postdoctoral Science FoundationProject(BJRC20160501)supported by the SDUST Young Teachers Teaching Talent Training Plan,China
文摘Anchoring mechanism and failure characteristics of composite soft rock with weak interface usually exhibit remarkable difference from those in single rock mass.In order to fully understand the reinforcement mechanism of composite soft roof in western mining area of China,a mechanical model of composite soft rock with weak interface and rock bolt which considering the transverse shear sliding between different rock layers was established firstly.The anchoring effect was quantified by a factor defined as anchoring effect coefficient and its evolution equation was further deduced based on the deformation relationship and homogenized distribution assumption of stress acting on composite structure.Meanwhile,the numerical simulation model of composite soft rock with shear joint was prompted by finite element method.Then detailed analysis were carried out for the deformation features,stress distribution and failure behavior of rock mass and rock bolt near the joint under transverse load.The theoretical result indicates that the anchoring effect of rock-bolt through weak joint changes with the working status of rock mass and closely relates with the physical and geometric parameters of rock mass and rock bolt.From the numerical results,the bending deformation of rock bolt accurately characterized by Doseresp model is mainly concentrated between two plastic hinges near the shear joint.The maximum tensile and compression stresses distribute in the plastic hinge.However,the maximum shear stress appears at the positions of joint surface.The failure zones of composite rock are produced firstly at the joint surface due to the reaction of rock bolt.The above results laid a theoretical and computational foundation for further study of anchorage failure in composite soft rock.
基金Projects(52104135, 51674266) supported by the National Natural Science Foundation of ChinaProject supported by the Qingdao Postdoctoral Applied Research Project Foundation,China。
文摘In China,Beishan granite is chosen as a potential host surrounding rock of a high-level radioactive waste(HLW)repository.For this research,Beishan granite specimens were heated up to 300℃,400℃ and 500℃,respectively.And conventional triaxial compression tests were conducted after cooling down the samples.The results show that after 300℃,400℃ and 500℃ heating treatment,the diameter of samples increases by 0.066%,0.143%and 0.409%,respectively,which is a little larger than the axial length changes.Mechanical tests show that peak strength increases slightly with increasing temperature.However,the dilatancy threshold is lower than that observed for samples which have not experienced heating treatment.Peak strain and dilatancy threshold strain show a strong temperature dependence.The higher the temperature,the greater the strain.Furthermore,increasing temperature has negative influence on threshold elastic modulus E_(c) and tangent elastic modulus E_(t).Poisson ratio decreases when temperature increases from 300℃ to 500℃,but it is still larger than that observed for samples which have not experienced heating treatment.In addition,AE monitoring shows a quiet period in the initial loading stage,which proves that the micro cracks are closed during heating and contribute to the increase of peak strength.
基金Project(2016YFC0801403) supported by the National Key Research and Development Program of ChinaProject(2017RCJJ012) supported by the Scientific Research Foundation of Shandong University of Science and Technology for Recruited Talents,China+1 种基金Project(ZR2018MEE009) supported by the Shandong Provincial Natural Science Foundation,ChinaProject(MDPC2017ZR04) supported by the Open Project Fund for State Key Laboratory of Mining Disaster Prevention and Control Co-founded by Shandong Province and the Ministry of Science and Technology of China
文摘Strainburst is one type of rockburst that generally occurs in deep tunnel.In this study,the strainburst behaviors of marble specimens were investigated under tunnel-excavation-induced stress condition,and two stress paths were designed,a commonly used stress path in true triaxial unloading rockburst tests and a new test path in which the intermediate principal stress was varied.During the tests,a high-speed camera was used to record the strainburst process,and an acoustic emission(AE)monitoring system was used to monitor the AE characteristics of failure.In these two stress paths,all the marble specimens exhibited strainbursts;however,when the intermediate principal stress was varied,the rockburst became more violent.The obtained results indicate that the intermediate principal stress has a significant effect on rockburst behavior of marble.Under a higher intermediate principal stress before the unloading,more elastic strain energy was accumulated in the specimen,and the cumulative AE energy was higher in the rockburst-induced failure,i.e.,more elastic strain energy was released during the failure.Therefore,more violent failure was observed:more rock fragments with a higher mass and larger size were ejected outward.
基金Project(51904165)supported by the National Natural Science Foundation of ChinaProject(ZR2019QEE026)supported by the Shandong Provincial Natural Science Foundation,ChinaProject(ZR2019ZD13)supported by the Major Program of Shandong Provincial Natural Science Foundation,China。
文摘Lots of field investigations have proven that layer-crack structure usually appears during the excavation process of deep rock or coal mass.To provide experimental data for studying the formation mechanism of layer-crack structure,this study researches the influence of lateral pressure on the mechanical behavior of different rock types.Four rock types have been tested and the formation mechanism of macro-fracture surface is analyzed.Results indicate that the brittleness and burst proneness of rock or coal material are stronger than that of gypsum material due to the different mineral compositions and structures.When the lateral pressure is less than 10%uniaxial strength,the peak stress and elastic modulus increase with the increase of lateral pressure;but when the lateral pressure is larger than 10%uniaxial strength,the two parameters decrease slightly or keep steady.This is because when the lateral pressure reaches a certain value,local failure will be formed during the process of applying lateral pressure.Under the condition of low lateral pressure,the failure of the specimen is dominated by the tensile mechanism;under the condition of relatively high lateral pressure,the area of the specimen close to the free surface is tensile splitting failure,and the area far from the free surface is shear failure.
基金Project(2015CB060200) supported by the National Basic Research Program of ChinaProject(41772313) supported by the National Natural Science Foundation of ChinaProject(2018zzts736) supported by the Independent Innovation Exploration Project of Central South University,China
文摘The onset times of acoustic signals with spikes,heavy bodies and unclear takeoffs are difficult to be picked accurately by the automatic method at present.To deal with this problem,an improved joint method based on the discrete wavelet transform(DWT),modified energy ratio(MER)and Akaike information criterion(AIC)pickers,has been proposed in this study.First,the DWT is used to decompose the signal into various components.Then,the joint application of MER and AIC pickers is carried out to pick the initial onset times of all selected components,where the minimum AIC position ahead of MER onset time is regarded as the initial onset time.Last,the average for initial onset times of all selected components is calculated as the final onset time of this signal.This improved joint method is tested and validated by the acoustic signals with different signal to noise ratios(SNRs)and waveforms.The results show that the improved joint method is not affected by the variations of SNR,and the onset times picked by this method are always accurate in different SNRs.Moreover,the onset times of all acoustic signals with spikes,heavy bodies and unclear takeoffs can be accurately picked by the improved joint method.Compared to some other methods including MER,AIC,DWT-MER and DWT-AIC,the improved joint method has better SNR stabilities and waveform adaptabilities.
基金Projects(51474218,51304127,50474029)supported by the National Natural Science Foundation of ChinaProject(2016M590646)supported by China Postdoctoral Science FoundationProject(2016121)supported by Qingdao Postdoctoral Applied Research Foundation,China
文摘Soft and medium-hard rocks are subjected to high rheology under high stress,and they are prone to a relatively large-degree of deformation when perturbed by external impacting loads.The phenomenon where rock deformation is developed due to external impacting perturbation in the rheological state is defined as the rock rheological perturbation effect.This work presents a new experimental system for investigating the rock rheological perturbation effect with experiments on medium-hard red sandstone.Results from our analysis show that red sandstone changes under two mechanical mechanisms:deformation-hardening effects at low stress states,and damage-fracture effects at high stress states when impacted by certain external impacting loads.Red sandstone tested in our experiments has a strain threshold of about 90% of the ultimate strain under the perturbation effect;the red sandstone is sensitive to a perturbed load when its actual strain exceeds the threshold.The perturbed deformation process of the rock can be divided into three phases:decline,approximately constant speed and acceleration.The rock will be rapidly destroyed when the perturbed deformation accumulates to a certain degree.The perturbation effect of rock deformation under uniaxial compression is more obvious than that under axial compression.Based on our experiment,a constitutive relation of the rock rheological perturbation effect is developed.
