Millimeter-wave(mm Wave) communications will be used in fifth-generation(5G) mobile communication systems, but they experience severe path loss and have high sensitivity to physical objects, leading to smaller cell ra...Millimeter-wave(mm Wave) communications will be used in fifth-generation(5G) mobile communication systems, but they experience severe path loss and have high sensitivity to physical objects, leading to smaller cell radii and complicated network architectures. A coverage extension scheme using large-scale antenna arrays(LSAAs) has been suggested and theoretically proven to be cost-efficient in combination with ultradense small cell networks. To analyze and optimize the LSAA-based network deployments, a comprehensive survey of recent advances in statistical mmWave channel modeling is first presented in terms of channel parameter estimation, large-scale path loss models, and small-scale cluster models. Next, the measurement and modeling results at two 5G candidate mmWave bands(e.g., 28 GHz and 39 GHz) are reviewed and compared in several outdoor scenarios of interest, where the propagation characteristics make crucial contributions to wireless network designs. Finally, the coverage behaviors of systems employing a large number of antenna arrays are discussed, as well as some implications on future mmWave cellular network designs.展开更多
Smart antennas have received great attention for their potentials to enable communication and perception functions at the same time.However,realizing the function synthesis remains an open challenge,and most existing ...Smart antennas have received great attention for their potentials to enable communication and perception functions at the same time.However,realizing the function synthesis remains an open challenge,and most existing system solutions are limited to narrow operating bands and high complexity and cost.Here,we propose an externally perceivable leakywave antenna(LWA)based on spoof surface plasmon polaritons(SSPPs),which can realize adaptive real-time switching between the“radiating”and“non-radiating”states and beam tracking at different frequencies.With the assistance of computer vision,the smart SSPP-LWA is able to detect the external target user or jammer,and intelligently track the target by self-adjusting the operating frequency.The proposed scheme helps to reduce the power consumption through dynamically controlling the radiating state of the antenna,and improve spectrum utilization and avoid spectrum conflicts through intelligently deciding the radiating frequency.On the other hand,it is also helpful for the physical layer communication security through switching the antenna working state according to the presence of the target and target beam tracking in real time.In addition,the proposed smart antenna can be generalized to other metamaterial systems and could be a candidate for synaesthesia integration in future smart antenna systems.展开更多
This paper presents an overview of a new very high throughput millimeterwave WLAN system operating at 45 GHz band. We begin by reviewing standards process of IEEE 802.11aj(45GHz). Then the frequency spectrum allocatio...This paper presents an overview of a new very high throughput millimeterwave WLAN system operating at 45 GHz band. We begin by reviewing standards process of IEEE 802.11aj(45GHz). Then the frequency spectrum allocation at 45 GHz band is introduced. Next, the channel measurement and mod-eling is given. Specifically, the millimeter-wave MIMO for physical layer enhancement is given in detail.展开更多
Based on the particle-in-cell technology and the secondary electron emission theory, a three-dimensional simulation method for multipactor is presented in this paper. By combining the finite difference time domain met...Based on the particle-in-cell technology and the secondary electron emission theory, a three-dimensional simulation method for multipactor is presented in this paper. By combining the finite difference time domain method and the panicle tracing method, such an algorithm is self-consistent and accurate since the interaction between electromagnetic fields and particles is properly modeled. In the time domain aspect, the generation of multipactor can be easily visualized, which makes it possible to gain a deeper insight into the physical mechanism of this effect. In addition to the classic secondary electron emission model, the measured practical secondary electron yield is used, which increases the accuracy of the algorithm. In order to validate the method, the impedance transformer and ridge waveguide filter are studied. By analyzing the evolution of the secondaries obtained by our method, multipactor thresholds of these components are estimated, which show good agreement with the experimental results. Furthermore, the most sensitive positions where multipactor occurs are determined from the phase focusing phenomenon, which is very meaningful for multipactor analysis and design.展开更多
This paper focuses on the design and implementation of an active multibeam antenna system for massive MIMO applications in 5G wireless communications.The highly integrated active multibeam antenna system is designed a...This paper focuses on the design and implementation of an active multibeam antenna system for massive MIMO applications in 5G wireless communications.The highly integrated active multibeam antenna system is designed and implemented at 5.8 GHz with 64 RF Channels and 256 antenna elements.The 64-channel highly integrated active multibeam antenna system provides a verification platform for digital beamforming algorithm and massive MIMO channel estimation for next generation wireless communications.展开更多
Multi-hop teleportation has significant value due to long-distance delivery of quantum information. Many studies about multi-hop teleportation are based on Bell pairs, partially entangled pairs or W state. The possibi...Multi-hop teleportation has significant value due to long-distance delivery of quantum information. Many studies about multi-hop teleportation are based on Bell pairs, partially entangled pairs or W state. The possibility of multi-hop teleportation constituted by partially entangled pairs relates to the number of nodes. The possibility of multi-hop teleportation constituted by double W states is （4/9）~n after n-hop teleportation. In this paper, a multi-hop teleportation scheme based on W state and EPR pairs is presented and proved. The successful possibility of quantum information transmitted hop by hop through intermediate nodes is deduced. The possibility of successful transmission is （2/3）~n after n-hop teleportation.展开更多
A layout and connection optimization for static frequency divider is presented. The layout optimization provides a new circle topology transistors placement and reasonable connection structure, which reduces the paras...A layout and connection optimization for static frequency divider is presented. The layout optimization provides a new circle topology transistors placement and reasonable connection structure, which reduces the parasitic effectively and enables self-oscillation frequency enhancement. Besides, bandwidth enhancement techniques based on a center-tap capacitor in input balun design and inductive peaking in latch design are adopted to improve further high frequency performance with low power consumption. As a proof of concept, design of a divide-by-2 static frequency divider in 0.13 μm SiGe BiCMOS technology is reported. With single-ended input clock signal, the divider is measured to be operated from 40 to 90 GHz. Phase noise measurements of a 90 GHz input clock signal indicate ideal behavior with no measurable noise contribution from the divider. The divider followed by a buffer that can deliver more than-10 dBm output power, which is sufficient to drive succeeding stage. To the author's knowledge, the divider exhibits a competitive power dissipation and the highest FOM among silicon based frequency dividers that operating higher than 70 GHz.展开更多
Ultrathin corrugated metallic structures have been proved to support spoof surface plasmon polariton (SPP) modes on two-dimension (2D) planar microwave circuits.However,to provide stronger field confinement,larger wid...Ultrathin corrugated metallic structures have been proved to support spoof surface plasmon polariton (SPP) modes on two-dimension (2D) planar microwave circuits.However,to provide stronger field confinement,larger width of strip is required to load deeper grooves,which is cumbersome in modern large-scale integrated circuits and chips.In this work,a new spoof SPP transmission line (TL) with zigzag grooves is proposed.This new structure can achieve stronger field confinement compared to conventional one with the same strip width.In other words,the proposed spoof SPP TL behaves equivalently to a conventional one with much larger size.Dispersion analysis theoretically indicates the negative correlation between the ability of field confinement and cutoff frequencies of spoof SPP TLs.Numerical simulations indicate that the cutoff frequency of the proposed TL is lower than the conventional one and can be easily modified with the fixed size.Furthermore,two samples of the new and conventional spoof SPP TLs are fabricated for experimental demonstration.Measured S-parameters and field distributions verify the ultra-strong ability of field confinement of the proposed spoof SPP TL.Hence,this novel spoof SPP structure with ultra-strong field confinement may find wide applications in microwave and terahertz engineering.展开更多
In this paper,we propose a theoretical model of the surface plasmon resonance-based optical fiber biosensor for detecting glucose concentration.The Au/ZnO/WS2 multilayer film is coated around optical fiber.Compared wi...In this paper,we propose a theoretical model of the surface plasmon resonance-based optical fiber biosensor for detecting glucose concentration.The Au/ZnO/WS2 multilayer film is coated around optical fiber.Compared with the conventional surface plasmon resonance sensor,WS2 material can increase the sensitivity of the biosensor.The absorption capacity of WS2 is used to load glucose oxidase by forming a sensitive area to recognize glucose.Refractive index of the solution is calculated and then the concentration of the glucose can be obtained by the correspondence between refractive index and glucose concentration.The highest sensitivity of the SPR biosensor with a structure of 40-nm Au/5-nm ZnO/14 layers of WS2 is 4310 nm/RIU.The proposed WS2-based SPR fiber biosensor has a unique effect on the detection of glucose concentration.It is expected to have potential applications in future medical blood glucose concentration detection.展开更多
An analytical solution is presented for the electromagnetic scattering from an infinite-length metallic carbon nanotube and a carbon nanotube bundle. The scattering field and scattering cross section are predicted usi...An analytical solution is presented for the electromagnetic scattering from an infinite-length metallic carbon nanotube and a carbon nanotube bundle. The scattering field and scattering cross section are predicted using a modal technique based on a Bessel and Hankel function for the electric line source and a quantum conductance function for the carbon nanotube. For the particular case of an isolated armchair （10, 10） carbon nanotube, the scattered field predicted from this technique is in excellent agreement with the measured result. Furthermore, the analysis indicates that the scattering pattern of an isolated carbon nanotube differs from that of the carbon nanotube bundle of identical index （m, n） metallic carbon nanotubes.展开更多
In the plasma sheath a narrow plasma channel generated by ultraintense laser pulses is simplified as a special cylindrical and hollow plasma waveguide with the infinite thickness of the plasma cladding. The electromag...In the plasma sheath a narrow plasma channel generated by ultraintense laser pulses is simplified as a special cylindrical and hollow plasma waveguide with the infinite thickness of the plasma cladding. The electromagnetic wave （EM） propagation properties of the plasma channel near the cutoff and far from the cutoff are considered. Theoretical analysis shows that TE0m and TM0m and hybrid modes emerge in the plasma channel, which is influenced by the normalized frequency parameter B and numerical aperture NA. The cutoffs of the various modes are approximated. Single-mode operation is possible without a high-frequency limitation in the channel.展开更多
A quick and exact imaging method for one-dimensional layered rough surfaces is proposed in this paper to study the scattering characteristics of a layered medium that exists widely in nature.The boundary integral equa...A quick and exact imaging method for one-dimensional layered rough surfaces is proposed in this paper to study the scattering characteristics of a layered medium that exists widely in nature.The boundary integral equations of layered rough surfaces are solved by using the propagation-inside-layer expansion combined with the forward and backward spectral acceleration method（PILE＋FB-SA）,and the back scattering data are obtained.Then,a conventional synthetic aperture radar（SAR） imaging procedure called back projection method is used to generate a two-dimensional（2D） image of the layered rough surfaces.Combined with the relative dielectric permittivity of realistic soil,the random rough surfaces with Gauss spectrum are used to simulate the layered medium with rough interfaces.Since the back scattering data are computed by using the fast numerical method,this method can be used to study layered rough surfaces with any parameter,which has a great application value in the detection and remote sensing areas.展开更多
A novel periodic boundary condition （PBC）, that is the constant transverse wavenumber （CTW） method, is introduced to solve the time delay in the transverse plane with oblique incidence. Based on the novel PBC, the...A novel periodic boundary condition （PBC）, that is the constant transverse wavenumber （CTW） method, is introduced to solve the time delay in the transverse plane with oblique incidence. Based on the novel PBC, the FDTD/PBC algorithm is proposed to study periodic structure consisting of plasma and vacuum. Then the reflection coefficient for the plasma slab from the FDTD/PBC algorithm is compared with the analytic results to show the validity of our technique. Finally, the reflection coefficients for the plasma photonic crystals are calculated using the FDTD/PBC algorithm to study the variation of bandgap characteristics with the incident angle and the plasma parameters. Thus it has provided the guiding sense for the actual manufacturing plasma photonic crystal.展开更多
The planar metamaterials comprising complementary double-ring resonators （CDRRs） show its left handed behaviour. As a consequent work, this paper presents a detailed parametric study on the magnetically resonant tra...The planar metamaterials comprising complementary double-ring resonators （CDRRs） show its left handed behaviour. As a consequent work, this paper presents a detailed parametric study on the magnetically resonant transmission characteristics of the complementary double-ring metamaterials based on its structural parameters. This will be useful for the design of compact planar metamaterials based on the transmission lines loaded with CDIRRs.展开更多
This paper investigates the radiation characteristics of metal single-walled zig-zag carbon nanotubes as a dipole antenna at terahertz wave range. The current distribution, input impedance and mutual impedance are cal...This paper investigates the radiation characteristics of metal single-walled zig-zag carbon nanotubes as a dipole antenna at terahertz wave range. The current distribution, input impedance and mutual impedance are calculated for various geometrical parameters of vertically-aligned carbon nanotubes. The numerical results demonstrate the properties of the antenna depending strongly on the geometrical parameters such as the radius, the lengths of carbon nantobues, and the spacing between nanotubes. It is found that the zig-zag carbon nanotubes exhibit very high input impedance and the mutual impedances for antenna array applications. These unique high impedance properties are different from the conventional metal thin wire antenna. The far-field patterns and gain of antenna array are also calculated. The maximum gain of array of 100-element array is up to 20.0 dB, which is larger than the gain of 0.598 dB of single dipole antenna at distance d = 0.5λ.展开更多
By using 0.15 μm GaAs pHEMT （pseudomorphic high electron mobility transistor） technology,a design of millimeter wave power amplifier microwave monolithic integrated circuit （MMIC） is presented.With careful optimi...By using 0.15 μm GaAs pHEMT （pseudomorphic high electron mobility transistor） technology,a design of millimeter wave power amplifier microwave monolithic integrated circuit （MMIC） is presented.With careful optimization on circuit structure,this two-stage power amplifier achieves a simulated gain of 15.5 dB with fluctuation of 1 dB from 33 GHz to 37 GHz.A simulated output power of more than 30 dBm in saturation can be drawn from 3 W DC supply with maximum power added efficiency （PAE） of 26%.Rigorous electromagnetic simulation is performed to make sure the simulation results are credible.The whole chip area is 3.99 mm2 including all bond pads.展开更多
Many previous studies about teleportation are based on pure state. Study of quantum channel as mixed state is more realistic but complicated as pure states degenerate into mixed states by interaction with environment,...Many previous studies about teleportation are based on pure state. Study of quantum channel as mixed state is more realistic but complicated as pure states degenerate into mixed states by interaction with environment, and the Werner state plays an important role in the study of the mixed state. In this paper, the quantum wireless multihop network is proposed and the information is transmitted hop by hop through teleportation. We deduce a specific expression of the recovered state not only after one-hop teleportation but also across multiple intermediate nodes based on Werner state in a quantum wireless multihop network. We also obtain the fidelity of multihop teleportation.展开更多
We propose the practical realization of a shrinking device by using layered structures of homogeneous isotropic materials.By mimicking the shrinking device with concentric alternating thin layers of isotropic dielectr...We propose the practical realization of a shrinking device by using layered structures of homogeneous isotropic materials.By mimicking the shrinking device with concentric alternating thin layers of isotropic dielectrics,the permittivity and the permeability in each isotropic layer can be properly determined from the effective medium theory in order to achieve the shrinking effect.The device realized by multilayer coating with dielectrics is validated by TE wave simulation,and good shrinking performance is demonstrated with only a few layers of homogeneous isotropic materials.展开更多
In this paper,the feasibility and performance of millimeter wave(mm Wave)60 GHz ultra-wide band(UWB)systems for gigabit machine-to-machine(M2M)communications are analyzed.Specifically,based on specifications,channel m...In this paper,the feasibility and performance of millimeter wave(mm Wave)60 GHz ultra-wide band(UWB)systems for gigabit machine-to-machine(M2M)communications are analyzed.Specifically,based on specifications,channel measurements and models for both line-of-sight(LOS)and non-LOS(NLOS)scenarios,60 GHz propagation mechanisms are summarized,and 60 GHz UWB link budget and performance are analyzed.Tests are performed for determining ranges and antenna configurations.Results show that gigabit capacity can be achieved with omni-directional antennas configuration at the transceiver,especially in LOS conditions.When the LOS path is blocked by a moving person or by radiowave propagation in the NLOS situation,omni-directional and directional antennas configuration at the transceiver is required,especially for a larger range between machines in office rooms.Therefore,it is essential to keep a clear LOS path in M2M applications like gigabit data transfer.The goal of this work is to provide useful information for standardizations and design of 60 GHz UWB systems.展开更多
The magneto-electric dipole antenna is a kind of complementary antenna composed of a planar electric dipole and a shorted patch antenna. It has excellent electrical characteristics including wide impedance bandwidth, ...The magneto-electric dipole antenna is a kind of complementary antenna composed of a planar electric dipole and a shorted patch antenna. It has excellent electrical characteristics including wide impedance bandwidth, low cross-polarization, low back lobe radiation, nearly identical E-plane and H-plane patterns, stable radiation pattern, and steady antenna gain over the operating frequency range. In this paper, the basic characteristics of a linearly polarized magneto-electric dipole antenna are reviewed, and a dual-polarized antenna element based on the magneto-electric dipole is presented. The design of a conical beam wideband antenna with horizontal polarization is also described. These antennas have practical applications in modern 2G, 3G, LTE, WiFi, and WiMax wireless communication systems.展开更多
基金supported in part by the National Natural Science Foundation of China under Grant No.61671145the Key R&D Program of Jiangsu Province of China under Grant BE2018121
文摘Millimeter-wave(mm Wave) communications will be used in fifth-generation(5G) mobile communication systems, but they experience severe path loss and have high sensitivity to physical objects, leading to smaller cell radii and complicated network architectures. A coverage extension scheme using large-scale antenna arrays(LSAAs) has been suggested and theoretically proven to be cost-efficient in combination with ultradense small cell networks. To analyze and optimize the LSAA-based network deployments, a comprehensive survey of recent advances in statistical mmWave channel modeling is first presented in terms of channel parameter estimation, large-scale path loss models, and small-scale cluster models. Next, the measurement and modeling results at two 5G candidate mmWave bands(e.g., 28 GHz and 39 GHz) are reviewed and compared in several outdoor scenarios of interest, where the propagation characteristics make crucial contributions to wireless network designs. Finally, the coverage behaviors of systems employing a large number of antenna arrays are discussed, as well as some implications on future mmWave cellular network designs.
基金supports from the National Natural Science Foundation of China(Grant Nos.62288101,and 61971134)National Key Research and Development Program of China(Grant Nos.2021YFB3200502,and 2017YFA0700200)+2 种基金the Major Project of the Natural Science Foundation of Jiangsu Province(Grant No.BK20212002)the Fundamental Research Funds for Central Universities(Grant No.2242021R41078)the 111 Project(Grant No.111-2-05).
文摘Smart antennas have received great attention for their potentials to enable communication and perception functions at the same time.However,realizing the function synthesis remains an open challenge,and most existing system solutions are limited to narrow operating bands and high complexity and cost.Here,we propose an externally perceivable leakywave antenna(LWA)based on spoof surface plasmon polaritons(SSPPs),which can realize adaptive real-time switching between the“radiating”and“non-radiating”states and beam tracking at different frequencies.With the assistance of computer vision,the smart SSPP-LWA is able to detect the external target user or jammer,and intelligently track the target by self-adjusting the operating frequency.The proposed scheme helps to reduce the power consumption through dynamically controlling the radiating state of the antenna,and improve spectrum utilization and avoid spectrum conflicts through intelligently deciding the radiating frequency.On the other hand,it is also helpful for the physical layer communication security through switching the antenna working state according to the presence of the target and target beam tracking in real time.In addition,the proposed smart antenna can be generalized to other metamaterial systems and could be a candidate for synaesthesia integration in future smart antenna systems.
基金supported in part by National Key Basic Research Program of China (973 Program) under Grant No. 2013CB329002National Natural Science Foundation of China under Grant No. 61132003the Natural Science Foundation of Jiangsu Province of China under Grants BK2011019 and BK20130631
文摘This paper presents an overview of a new very high throughput millimeterwave WLAN system operating at 45 GHz band. We begin by reviewing standards process of IEEE 802.11aj(45GHz). Then the frequency spectrum allocation at 45 GHz band is introduced. Next, the channel measurement and mod-eling is given. Specifically, the millimeter-wave MIMO for physical layer enhancement is given in detail.
基金Project supported by the National Key Laboratory Foundation,China(Grant No.9140C530103110C5301)
文摘Based on the particle-in-cell technology and the secondary electron emission theory, a three-dimensional simulation method for multipactor is presented in this paper. By combining the finite difference time domain method and the panicle tracing method, such an algorithm is self-consistent and accurate since the interaction between electromagnetic fields and particles is properly modeled. In the time domain aspect, the generation of multipactor can be easily visualized, which makes it possible to gain a deeper insight into the physical mechanism of this effect. In addition to the classic secondary electron emission model, the measured practical secondary electron yield is used, which increases the accuracy of the algorithm. In order to validate the method, the impedance transformer and ridge waveguide filter are studied. By analyzing the evolution of the secondaries obtained by our method, multipactor thresholds of these components are estimated, which show good agreement with the experimental results. Furthermore, the most sensitive positions where multipactor occurs are determined from the phase focusing phenomenon, which is very meaningful for multipactor analysis and design.
文摘This paper focuses on the design and implementation of an active multibeam antenna system for massive MIMO applications in 5G wireless communications.The highly integrated active multibeam antenna system is designed and implemented at 5.8 GHz with 64 RF Channels and 256 antenna elements.The 64-channel highly integrated active multibeam antenna system provides a verification platform for digital beamforming algorithm and massive MIMO channel estimation for next generation wireless communications.
基金Project supported by the National Natural Science Foundation of China(Grant No.61571105)the Prospective Future Network Project of Jiangsu Province,China(Grant No.BY2013095-1-18)the Independent Project of State Key Laboratory of Millimeter Waves,China(Grant No.Z201504)
文摘Multi-hop teleportation has significant value due to long-distance delivery of quantum information. Many studies about multi-hop teleportation are based on Bell pairs, partially entangled pairs or W state. The possibility of multi-hop teleportation constituted by partially entangled pairs relates to the number of nodes. The possibility of multi-hop teleportation constituted by double W states is （4/9）~n after n-hop teleportation. In this paper, a multi-hop teleportation scheme based on W state and EPR pairs is presented and proved. The successful possibility of quantum information transmitted hop by hop through intermediate nodes is deduced. The possibility of successful transmission is （2/3）~n after n-hop teleportation.
基金supported by National Natural Science Foundation of China under Grant 61701114the National Science and Technology Major Project under Grant 2017ZX03001020the Scientific Research Foundation of Graduate School of Southeast University (Grant No. YBJJ1811)
文摘A layout and connection optimization for static frequency divider is presented. The layout optimization provides a new circle topology transistors placement and reasonable connection structure, which reduces the parasitic effectively and enables self-oscillation frequency enhancement. Besides, bandwidth enhancement techniques based on a center-tap capacitor in input balun design and inductive peaking in latch design are adopted to improve further high frequency performance with low power consumption. As a proof of concept, design of a divide-by-2 static frequency divider in 0.13 μm SiGe BiCMOS technology is reported. With single-ended input clock signal, the divider is measured to be operated from 40 to 90 GHz. Phase noise measurements of a 90 GHz input clock signal indicate ideal behavior with no measurable noise contribution from the divider. The divider followed by a buffer that can deliver more than-10 dBm output power, which is sufficient to drive succeeding stage. To the author's knowledge, the divider exhibits a competitive power dissipation and the highest FOM among silicon based frequency dividers that operating higher than 70 GHz.
基金the National Natural Science Foundation of China under Grant Nos.61871127,61701246,61631007,61571117,61501112,61501117,61522106,61722106,61701107,and 61701108,and 111 Project under Grant No.111-2-05.
文摘Ultrathin corrugated metallic structures have been proved to support spoof surface plasmon polariton (SPP) modes on two-dimension (2D) planar microwave circuits.However,to provide stronger field confinement,larger width of strip is required to load deeper grooves,which is cumbersome in modern large-scale integrated circuits and chips.In this work,a new spoof SPP transmission line (TL) with zigzag grooves is proposed.This new structure can achieve stronger field confinement compared to conventional one with the same strip width.In other words,the proposed spoof SPP TL behaves equivalently to a conventional one with much larger size.Dispersion analysis theoretically indicates the negative correlation between the ability of field confinement and cutoff frequencies of spoof SPP TLs.Numerical simulations indicate that the cutoff frequency of the proposed TL is lower than the conventional one and can be easily modified with the fixed size.Furthermore,two samples of the new and conventional spoof SPP TLs are fabricated for experimental demonstration.Measured S-parameters and field distributions verify the ultra-strong ability of field confinement of the proposed spoof SPP TL.Hence,this novel spoof SPP structure with ultra-strong field confinement may find wide applications in microwave and terahertz engineering.
基金Project supported by the Natural Science Foundation of Jiangsu Province,China(Grant No.BK20171442)the China Postdoctoral Science Foundation(Grant No.2018T110480)+2 种基金the Open Foundation of State Key Laboratory of Millimeter Waves,China(Grant No.K202003)the Open Foundation of State Key Laboratory of Luminescent Materials and Devices,China(Grant No.2020-skllmd-03)the Fund from the Research Center of Optical Communications Engineering&Technology,Jiangsu Province,China(Grant No.ZXF201904).
文摘In this paper,we propose a theoretical model of the surface plasmon resonance-based optical fiber biosensor for detecting glucose concentration.The Au/ZnO/WS2 multilayer film is coated around optical fiber.Compared with the conventional surface plasmon resonance sensor,WS2 material can increase the sensitivity of the biosensor.The absorption capacity of WS2 is used to load glucose oxidase by forming a sensitive area to recognize glucose.Refractive index of the solution is calculated and then the concentration of the glucose can be obtained by the correspondence between refractive index and glucose concentration.The highest sensitivity of the SPR biosensor with a structure of 40-nm Au/5-nm ZnO/14 layers of WS2 is 4310 nm/RIU.The proposed WS2-based SPR fiber biosensor has a unique effect on the detection of glucose concentration.It is expected to have potential applications in future medical blood glucose concentration detection.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.60871073,60971064,and 51005001)the Open Program of the State Key Laboratory of Millimeter Wave of China(Grant No.K201006)+1 种基金the Special Funds for the Technological and Innovative Talent of Harbin City,China(Grant No.2010RFXXG010)the Youth Foundation of Harbin University of Science and Technology,China(Grant Nos.2009YF025 and 2009YF024)
文摘An analytical solution is presented for the electromagnetic scattering from an infinite-length metallic carbon nanotube and a carbon nanotube bundle. The scattering field and scattering cross section are predicted using a modal technique based on a Bessel and Hankel function for the electric line source and a quantum conductance function for the carbon nanotube. For the particular case of an isolated armchair （10, 10） carbon nanotube, the scattered field predicted from this technique is in excellent agreement with the measured result. Furthermore, the analysis indicates that the scattering pattern of an isolated carbon nanotube differs from that of the carbon nanotube bundle of identical index （m, n） metallic carbon nanotubes.
基金supported by National Natural Science Foundation of China(No.60971122)the Jiangshu Province Science Foundation(No.BK2011727)the Open Research Program in China's State Key Laboratory of Millimeter Waves(No.K201103)
文摘In the plasma sheath a narrow plasma channel generated by ultraintense laser pulses is simplified as a special cylindrical and hollow plasma waveguide with the infinite thickness of the plasma cladding. The electromagnetic wave （EM） propagation properties of the plasma channel near the cutoff and far from the cutoff are considered. Theoretical analysis shows that TE0m and TM0m and hybrid modes emerge in the plasma channel, which is influenced by the normalized frequency parameter B and numerical aperture NA. The cutoffs of the various modes are approximated. Single-mode operation is possible without a high-frequency limitation in the channel.
基金Project supported by the State Key Laboratory Fund of Millimeter Waves,Nanjing,China (Grant No. K201201)the Natural Science Foundation Research Programs of Shannxi Province,China (Grant No. 2011JM8025)
文摘A quick and exact imaging method for one-dimensional layered rough surfaces is proposed in this paper to study the scattering characteristics of a layered medium that exists widely in nature.The boundary integral equations of layered rough surfaces are solved by using the propagation-inside-layer expansion combined with the forward and backward spectral acceleration method（PILE＋FB-SA）,and the back scattering data are obtained.Then,a conventional synthetic aperture radar（SAR） imaging procedure called back projection method is used to generate a two-dimensional（2D） image of the layered rough surfaces.Combined with the relative dielectric permittivity of realistic soil,the random rough surfaces with Gauss spectrum are used to simulate the layered medium with rough interfaces.Since the back scattering data are computed by using the fast numerical method,this method can be used to study layered rough surfaces with any parameter,which has a great application value in the detection and remote sensing areas.
基金Project supported by the National Natural Science Foundation of China (Grant No. 61072002)the Ph. D. Program Foundation of the Ministry of Education of China (Grant No. 20093227120018)+2 种基金the Science and Techniques Planning Project of Jiangsu Province of China (Grant No. BE2008107)the Opening Funding of the State Key Laboratory of Millimeter Waves (Grant No. K200910)the Advanced Professional Scientific Research Foundation of Jiangsu University (Grant No. 07JDG063),and the 9th Undergraduate Research Foundation of Jiangsu University (Grant No. 09A044)
文摘A novel periodic boundary condition （PBC）, that is the constant transverse wavenumber （CTW） method, is introduced to solve the time delay in the transverse plane with oblique incidence. Based on the novel PBC, the FDTD/PBC algorithm is proposed to study periodic structure consisting of plasma and vacuum. Then the reflection coefficient for the plasma slab from the FDTD/PBC algorithm is compared with the analytic results to show the validity of our technique. Finally, the reflection coefficients for the plasma photonic crystals are calculated using the FDTD/PBC algorithm to study the variation of bandgap characteristics with the incident angle and the plasma parameters. Thus it has provided the guiding sense for the actual manufacturing plasma photonic crystal.
基金Project supported by the National Natural Science Foundation of China(Grant No.61071045)the Natural Science Foundation of Jiangsu Province of China(Grant No.bk2009265)+2 种基金the New Century Training Programme Foundation for the Talents by the State Education Commission(Grant No.NCET080107)the Key Project of Chinese Ministry of Education(Grant No.109074)the National Aerospace Science Foundation of China(Grant No.20080169002)
文摘The planar metamaterials comprising complementary double-ring resonators （CDRRs） show its left handed behaviour. As a consequent work, this paper presents a detailed parametric study on the magnetically resonant transmission characteristics of the complementary double-ring metamaterials based on its structural parameters. This will be useful for the design of compact planar metamaterials based on the transmission lines loaded with CDIRRs.
基金Project supported by the National Natural Science Foundation of China (Grant No.60571026)the Open Project of State Key Laboratory of Millimeter Wave (Grant No.K201006)the Science and Technology Research Foundation of Heilongjiang Education Bureau of China (Grant No.11531055)
文摘This paper investigates the radiation characteristics of metal single-walled zig-zag carbon nanotubes as a dipole antenna at terahertz wave range. The current distribution, input impedance and mutual impedance are calculated for various geometrical parameters of vertically-aligned carbon nanotubes. The numerical results demonstrate the properties of the antenna depending strongly on the geometrical parameters such as the radius, the lengths of carbon nantobues, and the spacing between nanotubes. It is found that the zig-zag carbon nanotubes exhibit very high input impedance and the mutual impedances for antenna array applications. These unique high impedance properties are different from the conventional metal thin wire antenna. The far-field patterns and gain of antenna array are also calculated. The maximum gain of array of 100-element array is up to 20.0 dB, which is larger than the gain of 0.598 dB of single dipole antenna at distance d = 0.5λ.
基金supported by the Innovation Fund of State Key Lab of Millimeter Waves
文摘By using 0.15 μm GaAs pHEMT （pseudomorphic high electron mobility transistor） technology,a design of millimeter wave power amplifier microwave monolithic integrated circuit （MMIC） is presented.With careful optimization on circuit structure,this two-stage power amplifier achieves a simulated gain of 15.5 dB with fluctuation of 1 dB from 33 GHz to 37 GHz.A simulated output power of more than 30 dBm in saturation can be drawn from 3 W DC supply with maximum power added efficiency （PAE） of 26%.Rigorous electromagnetic simulation is performed to make sure the simulation results are credible.The whole chip area is 3.99 mm2 including all bond pads.
基金supported by the Prospective Future Network Project of Jiangsu Province,China(Grant No.BY2013095-1-18)the Independent Project of State Key Laboratory of Millimeter Waves(Grant No.Z201504)
文摘Many previous studies about teleportation are based on pure state. Study of quantum channel as mixed state is more realistic but complicated as pure states degenerate into mixed states by interaction with environment, and the Werner state plays an important role in the study of the mixed state. In this paper, the quantum wireless multihop network is proposed and the information is transmitted hop by hop through teleportation. We deduce a specific expression of the recovered state not only after one-hop teleportation but also across multiple intermediate nodes based on Werner state in a quantum wireless multihop network. We also obtain the fidelity of multihop teleportation.
基金Project supported by the National Natural Science Foundation of China (Grant No. 60971122)the Natural Science Foundation of Jiangsu Province of China (Grant No. BK2011727)+1 种基金the Open Research Program in China’s State Key Laboratory of Millimeter Waves (Grant No. K201103)the Funding of Graduate Innovation Center in NUAA (Grant No. kfjj20110216)
文摘We propose the practical realization of a shrinking device by using layered structures of homogeneous isotropic materials.By mimicking the shrinking device with concentric alternating thin layers of isotropic dielectrics,the permittivity and the permeability in each isotropic layer can be properly determined from the effective medium theory in order to achieve the shrinking effect.The device realized by multilayer coating with dielectrics is validated by TE wave simulation,and good shrinking performance is demonstrated with only a few layers of homogeneous isotropic materials.
基金supported by the State Key Laboratory of Millimeter Waves,Southeast University,China under grant No.K201517supported by the Fundamental Research Funds for the Central Universities under Grant No.2015 XS19.
文摘In this paper,the feasibility and performance of millimeter wave(mm Wave)60 GHz ultra-wide band(UWB)systems for gigabit machine-to-machine(M2M)communications are analyzed.Specifically,based on specifications,channel measurements and models for both line-of-sight(LOS)and non-LOS(NLOS)scenarios,60 GHz propagation mechanisms are summarized,and 60 GHz UWB link budget and performance are analyzed.Tests are performed for determining ranges and antenna configurations.Results show that gigabit capacity can be achieved with omni-directional antennas configuration at the transceiver,especially in LOS conditions.When the LOS path is blocked by a moving person or by radiowave propagation in the NLOS situation,omni-directional and directional antennas configuration at the transceiver is required,especially for a larger range between machines in office rooms.Therefore,it is essential to keep a clear LOS path in M2M applications like gigabit data transfer.The goal of this work is to provide useful information for standardizations and design of 60 GHz UWB systems.
文摘The magneto-electric dipole antenna is a kind of complementary antenna composed of a planar electric dipole and a shorted patch antenna. It has excellent electrical characteristics including wide impedance bandwidth, low cross-polarization, low back lobe radiation, nearly identical E-plane and H-plane patterns, stable radiation pattern, and steady antenna gain over the operating frequency range. In this paper, the basic characteristics of a linearly polarized magneto-electric dipole antenna are reviewed, and a dual-polarized antenna element based on the magneto-electric dipole is presented. The design of a conical beam wideband antenna with horizontal polarization is also described. These antennas have practical applications in modern 2G, 3G, LTE, WiFi, and WiMax wireless communication systems.
