Global interest in lithium-sulfur batteries as one of the most promising energy storage technologies has been sparked by their low sulfur cathode cost,high gravimetric,volumetric energy densities,abundant resources,an...Global interest in lithium-sulfur batteries as one of the most promising energy storage technologies has been sparked by their low sulfur cathode cost,high gravimetric,volumetric energy densities,abundant resources,and environmental friendliness.However,their practical application is significantly impeded by several serious issues that arise at the cathode-electrolyte interface,such as interface structure degradation including the uneven deposition of Li_(2)S,unstable cathode-electrolyte interphase(CEI)layer and intermediate polysulfide shuttle effect.Thus,an optimized cathode-electrolyte interface along with optimized electrodes is required for overall improvement.Herein,we comprehensively outline the challenges and corresponding strategies,including electrolyte optimization to create a dense CEI layer,regulating the Li_(2)S deposition pattern,and inhibiting the shuttle effect with regard to the solid-liquid-solid pathway,the transformation from solid-liquid-solid to solid-solid pathway,and solid-solid pathway at the cathode-electrolyte interface.In order to spur more perceptive research and hasten the widespread use of lithium-sulfur batteries,viewpoints on designing a stable interface with a deep comprehension are also put forth.展开更多
Reversible solid oxide cells(RSOCs)are capable of converting various energy resources,between electricity and chemical fuels,with high efficiency and flexibility,making them suitable for grid balancing and renewable e...Reversible solid oxide cells(RSOCs)are capable of converting various energy resources,between electricity and chemical fuels,with high efficiency and flexibility,making them suitable for grid balancing and renewable energy consumption.However,the practical application of RSOCs is still limited by the insufficient activity and stability of the electrodes in different operating modes.Herein,a highly efficient symmetrical electrode composed of La_(0.3)Sr_(0.6)Ti_(0.1)Co_(0.2)Fe_(0.7)O_(3-δ)(LSTCF)nanofibers and in situ exsolved Co_(3)Fe_(7) nanoparticles is developed for boosting the performance of RSOCs.The reversible phase transition,high activity and stability of the electrode have been confirmed by a combination of experimental(e.g.,transmission electron microscopy and X-ray absorption fine structure)and computational studies.Electrolyte-supported RSOCs with the symmetrical electrode demonstrate excellent catalytic activity and stability,achieving a high peak power density of 0.98 W cm^(-2)in the fuel cell mode using H_(2)as the fuel(or 0.53 W cm^(-2)using CH_(4)as the fuel)and a high current density of 1.09 A cm^(-2) at 1.4 V in the CO_(2)electrolysis mode(or 1.03 A cm^(-2)at 1.3 V for H_(2)O electrolysis)at 800℃while maintaining excellent durability for over 100 h.展开更多
Chattering phenomenon and singularity are still the main problems that hinder the practical application of sliding mode control. In this paper, a fixed time integral sliding mode controller is designed based on fixed ...Chattering phenomenon and singularity are still the main problems that hinder the practical application of sliding mode control. In this paper, a fixed time integral sliding mode controller is designed based on fixed time stability theory, which ensures precise convergence of the state variables of controlled system, and overcomes the drawback of convergence time growing unboundedly as the initial value increases in finite time controller. It makes the controlled system converge to the control objective within a fixed time bounded by a constant as the initial value grows, and convergence time can be changed by adjusting parameters of controllers properly. Compared with other fixed time controllers, the fixed time integral sliding mode controller proposed in this paper achieves chattering-free control, and integral expression is used to avoid singularity generated by derivation. Finally, the controller is used to stabilize four-order chaotic power system. The results demonstrate that the controller realizes the non-singular chattering-free control of chaotic oscillation in the power system and guarantees the fixed time convergence of state variables, which shows its higher superiority than other finite time controllers.展开更多
In this paper, period-doubling bifurcation in a two-stage power factor correction converter is analyzed by using the method of incremental harmonic balance （IHB） and Floquet theory. A two-stage power factor correcti...In this paper, period-doubling bifurcation in a two-stage power factor correction converter is analyzed by using the method of incremental harmonic balance （IHB） and Floquet theory. A two-stage power factor correction converter typically employs a cascade configuration of a pre-regulator boost power factor correction converter with average current mode control to achieve a near unity power factor and a tightly regulated post-regulator DC-DC Buck converter with voltage feedback control to regulate the output voltage. Based on the assumption that the tightly regulated postregulator DC-DC Buck converter is represented as a constant power sink and some other assumptions, the simplified model of the two-stage power factor correction converter is derived and its approximate periodic solution is calculated by the method of IHB. And then, the stability of the system is investigated by using Floquet theory and the stable boundaries are presented on the selected parameter spaces. Finally, some experimental results are given to confirm the effectiveness of the theoretical analysis.展开更多
Plasma-activated water(PAW),as an extended form of cold atmospheric-pressure plasma,greatly expands the application of plasma-based technology.The biological effects of PAW are closely related to the aqueous reactive ...Plasma-activated water(PAW),as an extended form of cold atmospheric-pressure plasma,greatly expands the application of plasma-based technology.The biological effects of PAW are closely related to the aqueous reactive species,which can be regulated by the activation process.In this study,surface plasma-activated air(SAA)and a He+O_(2)plasma jet(Jet)were parallelly combined(the SAA+Jet combination)or sequentially combined(the SAA→Jet combination and the Jet→SAA combination)to prepare plasma-activated saline(PAS).The PAS activated by the combinations exhibited stronger bactericidal effects than that activated by the SAA or the Jet alone.The concentrations of H_(2)O_(2)and NO_(2)^(-)were higher in the PAS activated by the Jet→SAA combination,while ONOO^(-)concentrations were close in the three kinds of PAS and^(1)O_(2)concentrations were higher in the PAS activated by the SAA+Jet combination.The analysis of scavengers also demonstrated that H_(2)O_(2),^(1)O_(2),and ONOO^(-)in the PAS activated by the SAA+Jet combination,and^(1)O_(2)in the PAS activated by the Jet→SAA combination played critical roles in bactericidal effects.Further,the effective placement time of the three PAS varied,and the PAS activated by the Jet→SAA combination could also inactivate 2.6-log_(10)of MRSA cells after placement for more than 60 min.The regulation of reactive species in plasma-activated water via different combinations of plasma devices could improve the directional application of plasma-activated water in the biomedical field.展开更多
Epoxy-based composites containing montmorillonite(MMT)modified by silylation reaction withγ-aminopropyltriethoxysilane(γ-APTES)and 3-(glycidyloxypropyl)trimethoxysilane(GPTMS)are successfully prepared.The effects of...Epoxy-based composites containing montmorillonite(MMT)modified by silylation reaction withγ-aminopropyltriethoxysilane(γ-APTES)and 3-(glycidyloxypropyl)trimethoxysilane(GPTMS)are successfully prepared.The effects of filler loading and surface modification on the electrical and thermal properties of the epoxy/MMT composites are investigated.Compared with the pure epoxy resin,the epoxy/MMT composite,whether MMT is surface-treated or not,shows low dielectric permittivity,low dielectric loss,and enhanced dielectric strength.The MMT in the epoxy/MMT composite also influences the thermal properties of the composite by improving the thermal conductivity and stability.Surface functionalization of MMT not only conduces to the better dispersion of the nanoparticles,but also significantly affects the electric and thermal properties of the hybrid by influencing the interfaces between MMT and epoxy resin.Improved interfaces are good for enhancing the electric and thermal properties of nanocomposites.What is more,the MMT modified with GPTMS rather thanγ-APTES is found to have greater influence on improving the interface between the MMT filler and polymer matrices,thus resulting in lower dielectric loss,lower electric conductivity,higher breakdown strength,lower thermal conductivity,and higher thermal stability.展开更多
In this study, the mechanisms of the anode phenomena and anode erosion with various contact materials were investigated. Arc parameters were calculated, and the anode temperature was predicted with a transient self-co...In this study, the mechanisms of the anode phenomena and anode erosion with various contact materials were investigated. Arc parameters were calculated, and the anode temperature was predicted with a transient self-consistent model. The simulation results predicted a constricted arc column and obvious anode phenomena in Cu–Cr alloy contacts than in W–Cu alloy contacts.This observation could be the reason for the concentrated anode erosion in Cu–Cr alloys. For the contacts made by pure tungsten(W) and W–Cu alloy, the anode temperature increased rapidly because of the low specific heat of W. However, the maximum energy flux from the arc column to the anode surface was lower than in other cases. The simulation results were compared with experimental results.展开更多
In this paper, a computational model is constructed to investigate the phenomenon of the initial plasma formation and current transfer in the single-wire electrical explosion in a vacuum. The process of the single-wir...In this paper, a computational model is constructed to investigate the phenomenon of the initial plasma formation and current transfer in the single-wire electrical explosion in a vacuum. The process of the single-wire electrical explosion is divided into four stages. Stage Ⅰ： the wire is in solid state. Stage Ⅱ： the melting stage. Stage Ⅲ： the wire melts completely and the initial plasma forms. Stage IV： the core and corona expand separately. The thermodynamic calculation is applied before the wire melts completely in stages Ⅰ and Ⅱ. In stage Ⅲ, a one-dimensional magnetohydrodynamics model comes into play until the instant when the voltage collapse occurs. The temperature, density, and velocity, which are derived from the magnetohydrodynamics calculation, are averaged over the distribution area. The averaged parameters are taken as the initial conditions for stage Ⅳ in which a simplified magnetohydrodynamics model is applied. A wide-range semi-empirical equation of state, which is established based on the Thomas-Fermi-Kirzhnits model, is constructed to describe the phase transition from solid state to plasma state. The initial plasma formation and the phenomenon of current transfer in the electrical explosion of aluminum wire are investigated using the computational model. Experiments of electrical explosion of aluminum wires are carried out to verify this model. Simulation results are also compared with experimental results of the electrical explosion of copper wire.展开更多
The world is witnessing increasing frequency of extreme events. The power system is the backbone critical infrastructure of our economy and is under treat of such events. The resilient power system is intended to cope...The world is witnessing increasing frequency of extreme events. The power system is the backbone critical infrastructure of our economy and is under treat of such events. The resilient power system is intended to cope with low probability, high risk extreme events including extreme natural disasters and man-made attacks. Realizing resilience in the power system has been an unprecedented mission. Equipped with today’s smart grid technologies, power system can be rendered more resilient by the strategies taken before, during and after a disruptive event erupts. Based on a thorough review of existing works, we present the most-investigated problems and solving measures according to their application stage. In the preparation stage, innovative planning frameworks considering disaster scenarios are discussed; after the event, the system can alter the topology and integrate resource allocation to alleviate load shedding. The characteristics of different disasters are investigated to facilitate enhancing resilience. The review provides a summary of resilience strategies in the power system and can shed light to future research and application.展开更多
This paper investigates the electronic relaxation of deep bulk trap and interface state in ZnO ceramics based on dielectric spectra measured in a wide range of temperature, frequency and bias, in addition to the stead...This paper investigates the electronic relaxation of deep bulk trap and interface state in ZnO ceramics based on dielectric spectra measured in a wide range of temperature, frequency and bias, in addition to the steady state response. It discusses the nature of net current flowing over the barrier affected by interface state, and then obtains temperature-dependent barrier height by approximate calculation from steady I-V （current-voltage） characteristics. Additional conductance and capacitance arising from deep bulk trap relaxation are calculated based on the displacement of the cross point between deep bulk trap and Fermi level under small AC signal. From the resonances due to deep bulk trap relaxation on dielectric spectra, the activation energies are obtained as 0.22 eV and 0.35 eV, which are consistent with the electronic levels of the main defect interstitial Zn and vacancy oxygen in the depletion layer. Under moderate bias, another resonance due to interface relaxation is shown on the dielectric spectra. The DC-like conductance is also observed in high temperature region on dielectric spectra, and the activation energy is much smaller than the barrier height in steady state condition, which is attributed to the displacement current coming from the shallow bulk trap relaxation or other factors.展开更多
The influence of copper vapor on the low-voltage circuit breaker arcs is studied. A three-dimensional （3-D） magnetohydrodynamics（MHD） model of arc motion under the effect of external magnetic field is built up. By...The influence of copper vapor on the low-voltage circuit breaker arcs is studied. A three-dimensional （3-D） magnetohydrodynamics（MHD） model of arc motion under the effect of external magnetic field is built up. By adopting the commercial computational fluid dynamics （CFD） package FLUENT based on control-volume method, the above MHD model is solved. For the mediums of air-1% Cu and air-10% Cu, the distributions of stationary temperature, pressure, electrical potential and the arc motion processes are compared with those of a pure air arc. The copper vapor diffusion process in the arc chamber and the distribution of copper vapor mass concentration are also simulated. The results shows that the copper vapor has a cooling effect on the arc plasma and can decrease the stationary voltage as well. Moreover, the presence of copper vapor can decelerate the arc motion in the quenching chambers. The maximal copper vapor concentration locates behind the arc root because of the existence of a ＂double vortex＂ near the electrodes.展开更多
Effects of A-site non-stoichiometry on the structural and electrical properties of 0.96K0.5＋xNa0.5＋xNbO3- 0.04LiSbO3 lead-free piezoelectric ceramics were examined for 0 ≤ x ≤0.02. The piezoelectric coefficients e...Effects of A-site non-stoichiometry on the structural and electrical properties of 0.96K0.5＋xNa0.5＋xNbO3- 0.04LiSbO3 lead-free piezoelectric ceramics were examined for 0 ≤ x ≤0.02. The piezoelectric coefficients exhibited a maximum, d33 = 187 pC/N at x = 0.0075, coinciding with the maximum of the grain size and the apparent density at x = 0.0075. The apparent density and the piezoelectric coefficients decreased with increasing x at higher x which was likely due to the crystal geometrical distortion of 0.96K0.5＋xNa0.5＋xNbO3-0.04LiSbO3. In addition, super-large grains were found and this may be due to liquid phase sintering. Excess （K＋＋Na＋） attracted a sum of space charges to keep the charge neutral, resulting in charge leakage during the course of ceramic polarization, influencing the piezoelectric and ferroelectric properties. These findings are of importance for guiding the design of Ko.sNao.sNbO3-based lead-free ceramics with enhanced electrical properties.展开更多
This work deals with an experimental study of a Cu planar wire array(PWA)in air and water under the stored energy 300-1200 J.A single Cu wire is adopted as a controlled trial.Four configurations of PWA and a wire with...This work deals with an experimental study of a Cu planar wire array(PWA)in air and water under the stored energy 300-1200 J.A single Cu wire is adopted as a controlled trial.Four configurations of PWA and a wire with the same mass(cross-section area)but the different specific surface areas(15-223 cm^(2)g^(-1))are exploded.The transient process is analyzed using high-speed photography in combination with the results of optical emission and discharge.Discharge characteristics revealed that PWA always has a higher electric power peak,early but higher voltage peak,as well as faster vaporization and ionization process than the single-wire case.Two to three times stronger optical emission could be obtained when replacing the single-wire with PWA,indicating a higher energy-density state is reached.Phenomenologically,in both air and water,single-wire load tends to develop a transverse stratified structure,while PWA is dominated by the uneven energy deposition among wires.Finally,the synchronism and uniformity of the PWA explosion are discussed.展开更多
This study focuses on the electrical properties and microstructure of polypropylene(PP)-based blends used for cable insulation in nuclear power plants(NPPs).The PP-based blend,comprising isotactic PP and propylene-bas...This study focuses on the electrical properties and microstructure of polypropylene(PP)-based blends used for cable insulation in nuclear power plants(NPPs).The PP-based blend,comprising isotactic PP and propylene-based elastomer(PBE)at concentrations ranging from 0 to 50 wt%,underwent a melt blending process and subsequent cobalt-60 gamma-ray irradiation with doses ranging from 0 to 250 kGy.Electrical conductivity,trap distribution,and alternating(AC)breakdown strength were chosen to assess the insulation performance.These results indicate that the addition of PBE significantly improves the electrical properties of PP under irradiation.For PP,the electrical conductivity increased with irradiation,whereas the trap depth and breakdown strength decreased sharply.Conversely,for the blend,these changes initially exhibit opposite trends.When the irradiation was increased to 250 kGy,the AC breakdown strength of the blend improved by more than 21%compared to that of PP.The physical and chemical structures of the samples were investigated to explore the improvement mechanisms.The results offer insights into the design of new cable-insulation materials suitable for NPPs.展开更多
Based on the fact that the real inductor and the real capacitor are fractional order in nature and the fractional calculus,the transfer function modeling and analysis of the open-loop Buck converter in a continuous co...Based on the fact that the real inductor and the real capacitor are fractional order in nature and the fractional calculus,the transfer function modeling and analysis of the open-loop Buck converter in a continuous conduction mode（CCM） operation are carried out in this paper.The fractional order small signal model and the corresponding equivalent circuit of the open-loop Buck converter in a CCM operation are presented.The transfer functions from the input voltage to the output voltage,from the input voltage to the inductor current,from the duty cycle to the output voltage,from the duty cycle to the inductor current,and the output impedance of the open-loop Buck converter in CCM operation are derived,and their bode diagrams and step responses are calculated,respectively.It is found that all the derived fractional order transfer functions of the system are influenced by the fractional orders of the inductor and the capacitor.Finally,the realization of the fractional order inductor and the fractional order capacitor is designed,and the corresponding PSIM circuit simulation results of the open-loop Buck converter in CCM operation are given to confirm the correctness of the derivations and the theoretical analysis.展开更多
Surface charge accumulation on insulator surface can have great influence on surface flashover performance.An experimental system is established to investigate surface charge accumulation and decay characteristics of ...Surface charge accumulation on insulator surface can have great influence on surface flashover performance.An experimental system is established to investigate surface charge accumulation and decay characteristics of Al2O3-filled epoxy resin insulators in 0.1 MPa SF6 under DC voltages.Surface potential is recorded by a Kelvin vibrating probe connected to an electrostatic voltmeter.By pre-depositing charges on insulator surface,the influence of surface charges on surface flashover performance is studied.The results reveal that surface charge distribution appearance is the combined effect of electrode injection,back discharge and gas ionization.Surface charge distribution has obvious polarity effect.It is concentrated near the HV electrode under positive voltages and dispersed under negative voltages.The difference in positive and negative surface flashover voltage is attributed to the difference in surface charge distribution under DC voltages of different polarities.Surface charge decay contains two stages,which satisfies the law of double exponential function.At first stage,surface charge decays fast,which corresponds to charges escaping from shallower traps.While it decays slowly at the second stage,which corresponds to charge escaping from deeper traps.Surface charge decay process is dominated by surface conductivity mechanism.The pre-deposited charges on insulation surface have great influence on surface flashover performance.The deposited positive charges can increase positive flashover voltage but decrease negative flashover voltage.展开更多
A new insulation system with inorganic A-B-A insulators was proposed to improve the surface flashover performance in vacuum. Inorganic A-B-A insulator samples of Mo/Al2O3 cermet-Al2O3 ceramic-Mo/Al2O3 cermet were prep...A new insulation system with inorganic A-B-A insulators was proposed to improve the surface flashover performance in vacuum. Inorganic A-B-A insulator samples of Mo/Al2O3 cermet-Al2O3 ceramic-Mo/Al2O3 cermet were prepared, in which the conductivity and permittivity of the Mo/Al2O3 cermets were controlled through different amount of metallic molybdenum powder added. The effects of both conductivity and permittivity of Mo/Al2O3 cermets on the DC and impulse surface flashover voltage in vacuum were experimentally investigated. The result showed that the DC and impulse surface flashover voltage were improved by 52% and 95%, respectively. For the distribution of electric field, two triple junctions, i.e., vacuum-layer A-cathode （TJ1） and vacuum-layer A-layer B （TJ2） were prepared with the introduction of layer A into the A-B-A insulation system. Based on the electric field distribution obtained via electrostatic field simulation and Maxwell-Wagner three-layer model, the electric field of T J1 decreases while that of T J2 increases with the increase in conductivity and permittivity of layer A under applied DC and impulse voltage, respectively. Therefore, the improvement of surface flashover performance of A-B-A insulators has been reasonably explained.展开更多
In this paper, the fractional-order mathematical model and the fractional-order state-space averaging model of the Buck-Boost converter in continuous conduction mode （CCM） are established based on the fractional cal...In this paper, the fractional-order mathematical model and the fractional-order state-space averaging model of the Buck-Boost converter in continuous conduction mode （CCM） are established based on the fractional calculus and the Adomian decomposition method. Some dynamical properties of the current-mode controlled fractional-order Buck- Boost converter are analysed. The simulation is accomplished by using SIMULINK. Numerical simulations are presented to verify the analytical results and we find that bifurcation points will be moved backward as α and β vary. At the same time, the simulation results show that the converter goes through different routes to chaos.展开更多
In this work,experimental and theoretical studies were carried out on arc-induced bubble dynamic behaviors in insulation oil.Direct experimental evidence indicated that the arc-induced bubble experiences pulsating gro...In this work,experimental and theoretical studies were carried out on arc-induced bubble dynamic behaviors in insulation oil.Direct experimental evidence indicated that the arc-induced bubble experiences pulsating growth rather than a continuous expansion.Furthermore,a theoretical model and numerical calculation method were proposed,which revealed the dynamic mechanism of bubble growth.Good agreement between the theoretical results and experimental observations verified the general correctness and feasibility of the proposed method.展开更多
In this paper,the influences of gas doping(O2,N2,Air)on the concentrations of reactive species and bactericidal effects induced by a He plasma jet are studied.Firstly,results show that gas doping causes an increase in...In this paper,the influences of gas doping(O2,N2,Air)on the concentrations of reactive species and bactericidal effects induced by a He plasma jet are studied.Firstly,results show that gas doping causes an increase in voltage and a decrease in current compared with the pure He discharge under the same discharge power,which might be attributed to the different chemical characteristics of O2 and N2 and verified by the changes in the gaseous reactive species shown in the optical emission spectroscopy(OES)and Fourier transform infrared(FTIR)spectroscopy.Secondly,the concentrations of aqueous reactive oxygen species(ROS)and reactive nitrogen species(RNS)are tightly related to the addition of O2 and N2 into the working gas.The concentrations of aqueous NO-2 and NO-3 significantly increase while the concentrations of aqueous ROS decrease with the admixture of N2.The addition of O2 has little effect on the concentrations of NO-2 and NO-3 and pH values;however,the addition of O2 increases the concentration of O-2 and deceases the concentrations of H2O2 and OH.Finally,the results of bactericidal experiments demonstrate that the inactivation efficiency of the four types of plasma jets is He+O2>He+Air>He>He+N2,which is in accordance with the changing trend of the concentration of aqueous O.-2 Simultaneously to the better understanding of the formation and removal mechanisms of reactive species in the plasma–liquid interaction,these results also prove the effectiveness of regulating the concentrations of aqueous reactive species and the bacteria inactivation effects by gas doping.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.52102302,22409161 and 52472249)the Young Talent Support Plan of Xi’an Jiaotong University(Grant No.DQ6J011)+4 种基金the Natural Science Foundation of Shaanxi Province(2023-JC-QN-0115)the China Postdoctoral Science Foundation(2022M712499)Beilin District Science and Technology Plan(GX2328)the support from Young Elite Scientists Sponsorship Program by Chinese Association for Science and Technologythe“High-Level Talent Introduction Plan”of Shaanxi Province and Siyuan Scholar of Xi’an Jiaotong University。
文摘Global interest in lithium-sulfur batteries as one of the most promising energy storage technologies has been sparked by their low sulfur cathode cost,high gravimetric,volumetric energy densities,abundant resources,and environmental friendliness.However,their practical application is significantly impeded by several serious issues that arise at the cathode-electrolyte interface,such as interface structure degradation including the uneven deposition of Li_(2)S,unstable cathode-electrolyte interphase(CEI)layer and intermediate polysulfide shuttle effect.Thus,an optimized cathode-electrolyte interface along with optimized electrodes is required for overall improvement.Herein,we comprehensively outline the challenges and corresponding strategies,including electrolyte optimization to create a dense CEI layer,regulating the Li_(2)S deposition pattern,and inhibiting the shuttle effect with regard to the solid-liquid-solid pathway,the transformation from solid-liquid-solid to solid-solid pathway,and solid-solid pathway at the cathode-electrolyte interface.In order to spur more perceptive research and hasten the widespread use of lithium-sulfur batteries,viewpoints on designing a stable interface with a deep comprehension are also put forth.
基金supported by the National Natural Science Foundation of China(No.52377212 and 51877173)program of Beijing Huairou Laboratory(ZD2022006A)+2 种基金the Key R&D Project of Shaanxi Province(2023-YBGY-057)the State Key Laboratory of Electrical Insulation and Power Equipment(EIPE22314,EIPE22306)the Natural Science Basic Research Program of Shaanxi(No.2023-JC-QN-0483).
文摘Reversible solid oxide cells(RSOCs)are capable of converting various energy resources,between electricity and chemical fuels,with high efficiency and flexibility,making them suitable for grid balancing and renewable energy consumption.However,the practical application of RSOCs is still limited by the insufficient activity and stability of the electrodes in different operating modes.Herein,a highly efficient symmetrical electrode composed of La_(0.3)Sr_(0.6)Ti_(0.1)Co_(0.2)Fe_(0.7)O_(3-δ)(LSTCF)nanofibers and in situ exsolved Co_(3)Fe_(7) nanoparticles is developed for boosting the performance of RSOCs.The reversible phase transition,high activity and stability of the electrode have been confirmed by a combination of experimental(e.g.,transmission electron microscopy and X-ray absorption fine structure)and computational studies.Electrolyte-supported RSOCs with the symmetrical electrode demonstrate excellent catalytic activity and stability,achieving a high peak power density of 0.98 W cm^(-2)in the fuel cell mode using H_(2)as the fuel(or 0.53 W cm^(-2)using CH_(4)as the fuel)and a high current density of 1.09 A cm^(-2) at 1.4 V in the CO_(2)electrolysis mode(or 1.03 A cm^(-2)at 1.3 V for H_(2)O electrolysis)at 800℃while maintaining excellent durability for over 100 h.
基金Project supported by the Science Fund for Creative Research Groups of the National Natural Science Foundation of China(Grant No.51521065)
文摘Chattering phenomenon and singularity are still the main problems that hinder the practical application of sliding mode control. In this paper, a fixed time integral sliding mode controller is designed based on fixed time stability theory, which ensures precise convergence of the state variables of controlled system, and overcomes the drawback of convergence time growing unboundedly as the initial value increases in finite time controller. It makes the controlled system converge to the control objective within a fixed time bounded by a constant as the initial value grows, and convergence time can be changed by adjusting parameters of controllers properly. Compared with other fixed time controllers, the fixed time integral sliding mode controller proposed in this paper achieves chattering-free control, and integral expression is used to avoid singularity generated by derivation. Finally, the controller is used to stabilize four-order chaotic power system. The results demonstrate that the controller realizes the non-singular chattering-free control of chaotic oscillation in the power system and guarantees the fixed time convergence of state variables, which shows its higher superiority than other finite time controllers.
基金supported by the National Natural Science Foundation of China (Grant No.51007068)the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No.20100201120028)+1 种基金the Fundamental Research Funds for the Central Universities of Chinathe State Key Laboratory of Electrical Insulation and Power Equipment of China (Grant No.EIPE10303)
文摘In this paper, period-doubling bifurcation in a two-stage power factor correction converter is analyzed by using the method of incremental harmonic balance （IHB） and Floquet theory. A two-stage power factor correction converter typically employs a cascade configuration of a pre-regulator boost power factor correction converter with average current mode control to achieve a near unity power factor and a tightly regulated post-regulator DC-DC Buck converter with voltage feedback control to regulate the output voltage. Based on the assumption that the tightly regulated postregulator DC-DC Buck converter is represented as a constant power sink and some other assumptions, the simplified model of the two-stage power factor correction converter is derived and its approximate periodic solution is calculated by the method of IHB. And then, the stability of the system is investigated by using Floquet theory and the stable boundaries are presented on the selected parameter spaces. Finally, some experimental results are given to confirm the effectiveness of the theoretical analysis.
基金supported by National Natural Science Foundation of China(No.51977174)。
文摘Plasma-activated water(PAW),as an extended form of cold atmospheric-pressure plasma,greatly expands the application of plasma-based technology.The biological effects of PAW are closely related to the aqueous reactive species,which can be regulated by the activation process.In this study,surface plasma-activated air(SAA)and a He+O_(2)plasma jet(Jet)were parallelly combined(the SAA+Jet combination)or sequentially combined(the SAA→Jet combination and the Jet→SAA combination)to prepare plasma-activated saline(PAS).The PAS activated by the combinations exhibited stronger bactericidal effects than that activated by the SAA or the Jet alone.The concentrations of H_(2)O_(2)and NO_(2)^(-)were higher in the PAS activated by the Jet→SAA combination,while ONOO^(-)concentrations were close in the three kinds of PAS and^(1)O_(2)concentrations were higher in the PAS activated by the SAA+Jet combination.The analysis of scavengers also demonstrated that H_(2)O_(2),^(1)O_(2),and ONOO^(-)in the PAS activated by the SAA+Jet combination,and^(1)O_(2)in the PAS activated by the Jet→SAA combination played critical roles in bactericidal effects.Further,the effective placement time of the three PAS varied,and the PAS activated by the Jet→SAA combination could also inactivate 2.6-log_(10)of MRSA cells after placement for more than 60 min.The regulation of reactive species in plasma-activated water via different combinations of plasma devices could improve the directional application of plasma-activated water in the biomedical field.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.21806129,51872238,51407134,and 51521065)the China Postdoctoral Science Foundation(Grant No.2016M590619)+3 种基金the Natural Science Foundation of Shandong Province,China(Grant No.ZR2016EEQ28)the State Key Laboratory of Electrical Insulation and Power Equipment,China(Grant No.EIPE14107)the Fundamental Research Funds for the Central Universities,China(Grant No.3102018zy045)the Natural Science Basic Research Plan in Shaanxi Province,China(Grant No.2017JQ5116)
文摘Epoxy-based composites containing montmorillonite(MMT)modified by silylation reaction withγ-aminopropyltriethoxysilane(γ-APTES)and 3-(glycidyloxypropyl)trimethoxysilane(GPTMS)are successfully prepared.The effects of filler loading and surface modification on the electrical and thermal properties of the epoxy/MMT composites are investigated.Compared with the pure epoxy resin,the epoxy/MMT composite,whether MMT is surface-treated or not,shows low dielectric permittivity,low dielectric loss,and enhanced dielectric strength.The MMT in the epoxy/MMT composite also influences the thermal properties of the composite by improving the thermal conductivity and stability.Surface functionalization of MMT not only conduces to the better dispersion of the nanoparticles,but also significantly affects the electric and thermal properties of the hybrid by influencing the interfaces between MMT and epoxy resin.Improved interfaces are good for enhancing the electric and thermal properties of nanocomposites.What is more,the MMT modified with GPTMS rather thanγ-APTES is found to have greater influence on improving the interface between the MMT filler and polymer matrices,thus resulting in lower dielectric loss,lower electric conductivity,higher breakdown strength,lower thermal conductivity,and higher thermal stability.
基金supported by the Sichuan Science and Technology Program (No. 2024NSFSC0867)National Natural Science Foundation of China (No. 52377157)。
文摘In this study, the mechanisms of the anode phenomena and anode erosion with various contact materials were investigated. Arc parameters were calculated, and the anode temperature was predicted with a transient self-consistent model. The simulation results predicted a constricted arc column and obvious anode phenomena in Cu–Cr alloy contacts than in W–Cu alloy contacts.This observation could be the reason for the concentrated anode erosion in Cu–Cr alloys. For the contacts made by pure tungsten(W) and W–Cu alloy, the anode temperature increased rapidly because of the low specific heat of W. However, the maximum energy flux from the arc column to the anode surface was lower than in other cases. The simulation results were compared with experimental results.
基金Project supported by the National Science Foundation of China(Grant Nos.51322706,51237006,and 51325705)the Program for New Century Excellent Talents in University,China(Grant No.NCET-11-0428)the Fundamental Research Funds for the Central Universities,China
文摘In this paper, a computational model is constructed to investigate the phenomenon of the initial plasma formation and current transfer in the single-wire electrical explosion in a vacuum. The process of the single-wire electrical explosion is divided into four stages. Stage Ⅰ： the wire is in solid state. Stage Ⅱ： the melting stage. Stage Ⅲ： the wire melts completely and the initial plasma forms. Stage IV： the core and corona expand separately. The thermodynamic calculation is applied before the wire melts completely in stages Ⅰ and Ⅱ. In stage Ⅲ, a one-dimensional magnetohydrodynamics model comes into play until the instant when the voltage collapse occurs. The temperature, density, and velocity, which are derived from the magnetohydrodynamics calculation, are averaged over the distribution area. The averaged parameters are taken as the initial conditions for stage Ⅳ in which a simplified magnetohydrodynamics model is applied. A wide-range semi-empirical equation of state, which is established based on the Thomas-Fermi-Kirzhnits model, is constructed to describe the phase transition from solid state to plasma state. The initial plasma formation and the phenomenon of current transfer in the electrical explosion of aluminum wire are investigated using the computational model. Experiments of electrical explosion of aluminum wires are carried out to verify this model. Simulation results are also compared with experimental results of the electrical explosion of copper wire.
基金funded by Science and Technology Project of State Grid,China(5202011600UG)the National Natural Science Foundation of China(51577147)
文摘The world is witnessing increasing frequency of extreme events. The power system is the backbone critical infrastructure of our economy and is under treat of such events. The resilient power system is intended to cope with low probability, high risk extreme events including extreme natural disasters and man-made attacks. Realizing resilience in the power system has been an unprecedented mission. Equipped with today’s smart grid technologies, power system can be rendered more resilient by the strategies taken before, during and after a disruptive event erupts. Based on a thorough review of existing works, we present the most-investigated problems and solving measures according to their application stage. In the preparation stage, innovative planning frameworks considering disaster scenarios are discussed; after the event, the system can alter the topology and integrate resource allocation to alleviate load shedding. The characteristics of different disasters are investigated to facilitate enhancing resilience. The review provides a summary of resilience strategies in the power system and can shed light to future research and application.
基金supported by the National Outstanding Young Investigator Grant of China (Grant No. 50625721)the National Natural Science Foundation of China (Grant No. 50972118)
文摘This paper investigates the electronic relaxation of deep bulk trap and interface state in ZnO ceramics based on dielectric spectra measured in a wide range of temperature, frequency and bias, in addition to the steady state response. It discusses the nature of net current flowing over the barrier affected by interface state, and then obtains temperature-dependent barrier height by approximate calculation from steady I-V （current-voltage） characteristics. Additional conductance and capacitance arising from deep bulk trap relaxation are calculated based on the displacement of the cross point between deep bulk trap and Fermi level under small AC signal. From the resonances due to deep bulk trap relaxation on dielectric spectra, the activation energies are obtained as 0.22 eV and 0.35 eV, which are consistent with the electronic levels of the main defect interstitial Zn and vacancy oxygen in the depletion layer. Under moderate bias, another resonance due to interface relaxation is shown on the dielectric spectra. The DC-like conductance is also observed in high temperature region on dielectric spectra, and the activation energy is much smaller than the barrier height in steady state condition, which is attributed to the displacement current coming from the shallow bulk trap relaxation or other factors.
基金National Natural Science Foundation of China(Nos.5047702,50537050,50525722)Key Projects of Science and Technology Research of the Ministry of Education of China(No.10518)
文摘The influence of copper vapor on the low-voltage circuit breaker arcs is studied. A three-dimensional （3-D） magnetohydrodynamics（MHD） model of arc motion under the effect of external magnetic field is built up. By adopting the commercial computational fluid dynamics （CFD） package FLUENT based on control-volume method, the above MHD model is solved. For the mediums of air-1% Cu and air-10% Cu, the distributions of stationary temperature, pressure, electrical potential and the arc motion processes are compared with those of a pure air arc. The copper vapor diffusion process in the arc chamber and the distribution of copper vapor mass concentration are also simulated. The results shows that the copper vapor has a cooling effect on the arc plasma and can decrease the stationary voltage as well. Moreover, the presence of copper vapor can decelerate the arc motion in the quenching chambers. The maximal copper vapor concentration locates behind the arc root because of the existence of a ＂double vortex＂ near the electrodes.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 10804130 and 60871027)the Natural Science Foundation of Shaanxi Province of China (Grant No. 2009JQ1001)the Funds of the Key Laboratory of Electrical Insulation and Power Equipment (Grant No. EIPE10202)
文摘Effects of A-site non-stoichiometry on the structural and electrical properties of 0.96K0.5＋xNa0.5＋xNbO3- 0.04LiSbO3 lead-free piezoelectric ceramics were examined for 0 ≤ x ≤0.02. The piezoelectric coefficients exhibited a maximum, d33 = 187 pC/N at x = 0.0075, coinciding with the maximum of the grain size and the apparent density at x = 0.0075. The apparent density and the piezoelectric coefficients decreased with increasing x at higher x which was likely due to the crystal geometrical distortion of 0.96K0.5＋xNa0.5＋xNbO3-0.04LiSbO3. In addition, super-large grains were found and this may be due to liquid phase sintering. Excess （K＋＋Na＋） attracted a sum of space charges to keep the charge neutral, resulting in charge leakage during the course of ceramic polarization, influencing the piezoelectric and ferroelectric properties. These findings are of importance for guiding the design of Ko.sNao.sNbO3-based lead-free ceramics with enhanced electrical properties.
基金supported in part by National Natural Science Foundation of China(No.51907007)Natural Science Foundation of Beijing(No.3212034)+1 种基金State Key Laboratory of Electrical Insulation and Power Equipment(No.EIPE20204)State Key Laboratory of Advanced Electromagnetic Engineering and Technology(No.AEET 2019KF006)。
文摘This work deals with an experimental study of a Cu planar wire array(PWA)in air and water under the stored energy 300-1200 J.A single Cu wire is adopted as a controlled trial.Four configurations of PWA and a wire with the same mass(cross-section area)but the different specific surface areas(15-223 cm^(2)g^(-1))are exploded.The transient process is analyzed using high-speed photography in combination with the results of optical emission and discharge.Discharge characteristics revealed that PWA always has a higher electric power peak,early but higher voltage peak,as well as faster vaporization and ionization process than the single-wire case.Two to three times stronger optical emission could be obtained when replacing the single-wire with PWA,indicating a higher energy-density state is reached.Phenomenologically,in both air and water,single-wire load tends to develop a transverse stratified structure,while PWA is dominated by the uneven energy deposition among wires.Finally,the synchronism and uniformity of the PWA explosion are discussed.
基金supported by the National Natural Science Foundation of China(No.52077151)the State Key Laboratory of Electrical Insulation and Power Equipment(No.EIPE23208)the Key Laboratory of Engineering Dielectrics and Its Application,Ministry of Education(No.KFM202203).
文摘This study focuses on the electrical properties and microstructure of polypropylene(PP)-based blends used for cable insulation in nuclear power plants(NPPs).The PP-based blend,comprising isotactic PP and propylene-based elastomer(PBE)at concentrations ranging from 0 to 50 wt%,underwent a melt blending process and subsequent cobalt-60 gamma-ray irradiation with doses ranging from 0 to 250 kGy.Electrical conductivity,trap distribution,and alternating(AC)breakdown strength were chosen to assess the insulation performance.These results indicate that the addition of PBE significantly improves the electrical properties of PP under irradiation.For PP,the electrical conductivity increased with irradiation,whereas the trap depth and breakdown strength decreased sharply.Conversely,for the blend,these changes initially exhibit opposite trends.When the irradiation was increased to 250 kGy,the AC breakdown strength of the blend improved by more than 21%compared to that of PP.The physical and chemical structures of the samples were investigated to explore the improvement mechanisms.The results offer insights into the design of new cable-insulation materials suitable for NPPs.
基金Project supported by the National Natural Science Foundation of China (Grant No. 51007068)the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20100201120028)+2 种基金the Natural Science Basic Research Plan in Shaanxi Province of China (Grant No. 2012JQ7026)the Fundamental Research Funds for the Central Universities of China (Grant No. 2012jdgz09)the State Key Laboratory of Electrical Insulation and Power Equipment of China (Grant No. EIPE12303)
文摘Based on the fact that the real inductor and the real capacitor are fractional order in nature and the fractional calculus,the transfer function modeling and analysis of the open-loop Buck converter in a continuous conduction mode（CCM） operation are carried out in this paper.The fractional order small signal model and the corresponding equivalent circuit of the open-loop Buck converter in a CCM operation are presented.The transfer functions from the input voltage to the output voltage,from the input voltage to the inductor current,from the duty cycle to the output voltage,from the duty cycle to the inductor current,and the output impedance of the open-loop Buck converter in CCM operation are derived,and their bode diagrams and step responses are calculated,respectively.It is found that all the derived fractional order transfer functions of the system are influenced by the fractional orders of the inductor and the capacitor.Finally,the realization of the fractional order inductor and the fractional order capacitor is designed,and the corresponding PSIM circuit simulation results of the open-loop Buck converter in CCM operation are given to confirm the correctness of the derivations and the theoretical analysis.
文摘Surface charge accumulation on insulator surface can have great influence on surface flashover performance.An experimental system is established to investigate surface charge accumulation and decay characteristics of Al2O3-filled epoxy resin insulators in 0.1 MPa SF6 under DC voltages.Surface potential is recorded by a Kelvin vibrating probe connected to an electrostatic voltmeter.By pre-depositing charges on insulator surface,the influence of surface charges on surface flashover performance is studied.The results reveal that surface charge distribution appearance is the combined effect of electrode injection,back discharge and gas ionization.Surface charge distribution has obvious polarity effect.It is concentrated near the HV electrode under positive voltages and dispersed under negative voltages.The difference in positive and negative surface flashover voltage is attributed to the difference in surface charge distribution under DC voltages of different polarities.Surface charge decay contains two stages,which satisfies the law of double exponential function.At first stage,surface charge decays fast,which corresponds to charges escaping from shallower traps.While it decays slowly at the second stage,which corresponds to charge escaping from deeper traps.Surface charge decay process is dominated by surface conductivity mechanism.The pre-deposited charges on insulation surface have great influence on surface flashover performance.The deposited positive charges can increase positive flashover voltage but decrease negative flashover voltage.
基金supported by National Science Fund for Outstanding Young Scholars of China (No. 50625721)
文摘A new insulation system with inorganic A-B-A insulators was proposed to improve the surface flashover performance in vacuum. Inorganic A-B-A insulator samples of Mo/Al2O3 cermet-Al2O3 ceramic-Mo/Al2O3 cermet were prepared, in which the conductivity and permittivity of the Mo/Al2O3 cermets were controlled through different amount of metallic molybdenum powder added. The effects of both conductivity and permittivity of Mo/Al2O3 cermets on the DC and impulse surface flashover voltage in vacuum were experimentally investigated. The result showed that the DC and impulse surface flashover voltage were improved by 52% and 95%, respectively. For the distribution of electric field, two triple junctions, i.e., vacuum-layer A-cathode （TJ1） and vacuum-layer A-layer B （TJ2） were prepared with the introduction of layer A into the A-B-A insulation system. Based on the electric field distribution obtained via electrostatic field simulation and Maxwell-Wagner three-layer model, the electric field of T J1 decreases while that of T J2 increases with the increase in conductivity and permittivity of layer A under applied DC and impulse voltage, respectively. Therefore, the improvement of surface flashover performance of A-B-A insulators has been reasonably explained.
基金Project supported by the National Natural Science Foundation of China (Grant No. 51177117)the Specialized Research Fund for the Doctoral Program of Higher Education,China (Grant No. 20100201110023)
文摘In this paper, the fractional-order mathematical model and the fractional-order state-space averaging model of the Buck-Boost converter in continuous conduction mode （CCM） are established based on the fractional calculus and the Adomian decomposition method. Some dynamical properties of the current-mode controlled fractional-order Buck- Boost converter are analysed. The simulation is accomplished by using SIMULINK. Numerical simulations are presented to verify the analytical results and we find that bifurcation points will be moved backward as α and β vary. At the same time, the simulation results show that the converter goes through different routes to chaos.
基金supported by National Natural Science Foundation of China(No.51807151)。
文摘In this work,experimental and theoretical studies were carried out on arc-induced bubble dynamic behaviors in insulation oil.Direct experimental evidence indicated that the arc-induced bubble experiences pulsating growth rather than a continuous expansion.Furthermore,a theoretical model and numerical calculation method were proposed,which revealed the dynamic mechanism of bubble growth.Good agreement between the theoretical results and experimental observations verified the general correctness and feasibility of the proposed method.
基金supported by National Natural Science Foundation of China (Grant Nos. 51722705 and 51837008)
文摘In this paper,the influences of gas doping(O2,N2,Air)on the concentrations of reactive species and bactericidal effects induced by a He plasma jet are studied.Firstly,results show that gas doping causes an increase in voltage and a decrease in current compared with the pure He discharge under the same discharge power,which might be attributed to the different chemical characteristics of O2 and N2 and verified by the changes in the gaseous reactive species shown in the optical emission spectroscopy(OES)and Fourier transform infrared(FTIR)spectroscopy.Secondly,the concentrations of aqueous reactive oxygen species(ROS)and reactive nitrogen species(RNS)are tightly related to the addition of O2 and N2 into the working gas.The concentrations of aqueous NO-2 and NO-3 significantly increase while the concentrations of aqueous ROS decrease with the admixture of N2.The addition of O2 has little effect on the concentrations of NO-2 and NO-3 and pH values;however,the addition of O2 increases the concentration of O-2 and deceases the concentrations of H2O2 and OH.Finally,the results of bactericidal experiments demonstrate that the inactivation efficiency of the four types of plasma jets is He+O2>He+Air>He>He+N2,which is in accordance with the changing trend of the concentration of aqueous O.-2 Simultaneously to the better understanding of the formation and removal mechanisms of reactive species in the plasma–liquid interaction,these results also prove the effectiveness of regulating the concentrations of aqueous reactive species and the bacteria inactivation effects by gas doping.
