In order to study the preferred skin color for printing images,two CMYK images from ISO 400 and one from iStock,including five skin color images of East Asian females was selected in this study.The images were adjuste...In order to study the preferred skin color for printing images,two CMYK images from ISO 400 and one from iStock,including five skin color images of East Asian females was selected in this study.The images were adjusted with the CMYK printing ink volume variation of the single,double and triple channels in the given 280%total ink limit conditions.A larger number of color vision normal observers were organized to carry out the color preference evaluation experiment,and the selected preferred skin colors were analyzed.The distribution range of the chromaticity values for skin color images were obtained and the results indicated that there are three regions for printing skin color preferences,and the observers have a memory preference for brighter,fairer skin colors in young female and a reddish skin colors in girl,which can provide the guidance for color adjustment of printed skin color images.展开更多
It is of great scientific significance to construct a 3D dynamic structural color with a special color effect based on the microlens array.However,the problems of imperfect mechanisms and poor color quality need to be...It is of great scientific significance to construct a 3D dynamic structural color with a special color effect based on the microlens array.However,the problems of imperfect mechanisms and poor color quality need to be solved.A method of 3D structural color turning on periodic metasurfaces fabricated by the microlens array and self-assembly technology was proposed in this study.In the experiment,Polydimethylsiloxane(PDMS)flexible film was used as a substrate,and SiO2 microspheres were scraped into grooves of the PDMS film to form 3D photonic crystal structures.By adjusting the number of blade-coated times and microsphere concentrations,high-saturation structural color micropatterns were obtained.These films were then matched with microlens arrays to produce dynamic graphics with iridescent effects.The results showed that by blade-coated two times and SiO2 microsphere concentrations of 50%are the best conditions.This method demonstrates the potential for being widely applied in the anticounterfeiting printing and ultra-high-resolution display.展开更多
In the printing industry,the common method of coloring relies on inks,which contains amounts of chemical agents,causing environment pollution.However,structural color achieves coloration through the refraction and dif...In the printing industry,the common method of coloring relies on inks,which contains amounts of chemical agents,causing environment pollution.However,structural color achieves coloration through the refraction and diffraction of light by periodic structure,offering eco-friendly and fade-resistant advantages,as well as colorful.In this study,screen printing was used to create patterned mask on paper substrates.Then,coated SiO_(2)microspheres on the mask to create structural color patterns with angle-dependent color characteristics.The patterns showed color changes from rose-red to orange to green by changing the viewing angle.By changing the color grayscale,the absorption of stray light by the substrate was enhanced,thereby the brightness and saturation of the structural color improved too.This method is simple,cost-effective,and environmentally friendly,and it has highly promising for the application in printing and anti-counterfeiting.展开更多
Based on the Reynolds equation with Reynolds boundary conditions, the Castelli method was employed to solve the Reynolds equation for oil lubrication upon bearings. By doing so, a profile of nonlinear oil film force o...Based on the Reynolds equation with Reynolds boundary conditions, the Castelli method was employed to solve the Reynolds equation for oil lubrication upon bearings. By doing so, a profile of nonlinear oil film force of single-pad journal bearings is established. According to the structure of combination journal bearings, nonlinear oil film force of combination journal bearing is obtained by retrieval, interpolation and assembly techniques. As for symmetrical flexible Jeffcott rotor systems supported by combination journal bearings, the nonlinear motions of the center of the rotor are calculated by the self-adaptive Runge-Kutta method and Poincar6 mapping with different rotational speeds. The numerical results show that the system performance is slightly better when the pivot ratio changes from 0.5 to 0.6, and reveals nonlinear phenomena of periodic, period-doubing, quasi-periodic motion, etc.展开更多
文摘In order to study the preferred skin color for printing images,two CMYK images from ISO 400 and one from iStock,including five skin color images of East Asian females was selected in this study.The images were adjusted with the CMYK printing ink volume variation of the single,double and triple channels in the given 280%total ink limit conditions.A larger number of color vision normal observers were organized to carry out the color preference evaluation experiment,and the selected preferred skin colors were analyzed.The distribution range of the chromaticity values for skin color images were obtained and the results indicated that there are three regions for printing skin color preferences,and the observers have a memory preference for brighter,fairer skin colors in young female and a reddish skin colors in girl,which can provide the guidance for color adjustment of printed skin color images.
文摘It is of great scientific significance to construct a 3D dynamic structural color with a special color effect based on the microlens array.However,the problems of imperfect mechanisms and poor color quality need to be solved.A method of 3D structural color turning on periodic metasurfaces fabricated by the microlens array and self-assembly technology was proposed in this study.In the experiment,Polydimethylsiloxane(PDMS)flexible film was used as a substrate,and SiO2 microspheres were scraped into grooves of the PDMS film to form 3D photonic crystal structures.By adjusting the number of blade-coated times and microsphere concentrations,high-saturation structural color micropatterns were obtained.These films were then matched with microlens arrays to produce dynamic graphics with iridescent effects.The results showed that by blade-coated two times and SiO2 microsphere concentrations of 50%are the best conditions.This method demonstrates the potential for being widely applied in the anticounterfeiting printing and ultra-high-resolution display.
文摘In the printing industry,the common method of coloring relies on inks,which contains amounts of chemical agents,causing environment pollution.However,structural color achieves coloration through the refraction and diffraction of light by periodic structure,offering eco-friendly and fade-resistant advantages,as well as colorful.In this study,screen printing was used to create patterned mask on paper substrates.Then,coated SiO_(2)microspheres on the mask to create structural color patterns with angle-dependent color characteristics.The patterns showed color changes from rose-red to orange to green by changing the viewing angle.By changing the color grayscale,the absorption of stray light by the substrate was enhanced,thereby the brightness and saturation of the structural color improved too.This method is simple,cost-effective,and environmentally friendly,and it has highly promising for the application in printing and anti-counterfeiting.
基金Project(2007CB707706) supported by the National Basic Research Program of China Projects(51075327,10972179) supported by the National Natural Science Foundation of China+2 种基金 Project(SKLMT-KFKT-201011) supported by Open Foundation of State Key Laboratory of Mechanical Transmission,China Projects(2009JQ7006,2007E203) supported by the Natural Science Foundation of Shaanxi Province of China Projects(09JK680,07JK340) supported by the Natural Science Foundation of Department of Education of Shaanxi Province of China
文摘Based on the Reynolds equation with Reynolds boundary conditions, the Castelli method was employed to solve the Reynolds equation for oil lubrication upon bearings. By doing so, a profile of nonlinear oil film force of single-pad journal bearings is established. According to the structure of combination journal bearings, nonlinear oil film force of combination journal bearing is obtained by retrieval, interpolation and assembly techniques. As for symmetrical flexible Jeffcott rotor systems supported by combination journal bearings, the nonlinear motions of the center of the rotor are calculated by the self-adaptive Runge-Kutta method and Poincar6 mapping with different rotational speeds. The numerical results show that the system performance is slightly better when the pivot ratio changes from 0.5 to 0.6, and reveals nonlinear phenomena of periodic, period-doubing, quasi-periodic motion, etc.
