This study elaborates on the effects of matrix rigidity on the high-velocity impact behaviour of UHMWPE textile composites using experimental and numerical methods.Textile composite samples were manufactured of a plai...This study elaborates on the effects of matrix rigidity on the high-velocity impact behaviour of UHMWPE textile composites using experimental and numerical methods.Textile composite samples were manufactured of a plain-weave fabric(comprising Spectra?1000 fibres)and four different matrix materials.High-velocity impact tests were conducted by launching a spherical steel projectile to strike on the prepared samples via a gas gun.The experimental results showed that the textile composites gradually changed from a membrane stretching mode to a plate bending mode as the matrix rigidity and thickness increased.The composites deformed in the membrane stretching mode had higher impact resistance and energy absorption capacity,and it was found that the average energy absorption per ply was much higher in this mode,although the number of broken yarns was smaller in the perforated samples.Moreover,the flexible matrix composites always had higher perforation resistance but larger deformation than the rigid matrix counterparts in the tested thickness and velocity range.A novel numerical modelling approach with enhanced computational efficiency was proposed to simulate textile composites in mesoscale resolution.The simulation results revealed that stress and strain development in the more rigid matrix composite was localised in the vicinity of the impact location,leading to larger local deformation and inferior perforation resistance.展开更多
A micromechanical investigation on simple shear behavior of dense granular assemblies was carried out by discrete element method.Three series of numerical tests were performed to examine the effects of initial porosit...A micromechanical investigation on simple shear behavior of dense granular assemblies was carried out by discrete element method.Three series of numerical tests were performed to examine the effects of initial porosity,vertical stress and particle shape on simple shear behavior of the samples,respectively.It was found that during simple shear the directions of principal stress and principal strain increment rotate differently with shear strain level.The non-coaxiality between the two directions decreases with strain level and may greatly affect the shear behavior of the assemblies,especially their peak friction angles.The numerical modelling also reveals that the rotation of the principal direction of fabric anisotropy lags behind that of the major principal stress direction during simple shear,which is described as fabric hyteresis effect.The degrees of fabric and interparticle contact force anisotropies increase as particle angularity increases,whereas the orientations of these anisotropies have not been significantly influenced by particle shape.An extended stress–dilatancy relationship based on ROWE-DAVIS framework was proposed to consider the non-coaxiality effect under principal stress rotation.The model was validated by present numerical results as well as some published physical test and numerical modelled data.展开更多
Incorporating elastomers such as polymers in protective structures to withstand high energetic dynamic loads,has gained significant interest.The main objective of this study is to investigate the influence of a Polyur...Incorporating elastomers such as polymers in protective structures to withstand high energetic dynamic loads,has gained significant interest.The main objective of this study is to investigate the influence of a Polyurea coating towards the blast-induced response in steel plates.As such,Polyurea coated steel plates were tested under near-field blast loads,produced by the detonation of 1 kg of spherical nitromethane charges,at a standoff distance of 150 mm.Mild steel(XLERPLATE 350)and high-strength steel(BIS80)plates with thicknesses of 10 mm were Polyurea coated with thicknesses of 6 mm and 12 mm on either the front(facing the charge)or the back face.The deformation profiles were measured using 3D scanning.Numerical simulations were performed using the non-linear finite element code LS-DYNA.The strain-dependent behaviour of the steel and Polyurea were represented by Johnson-cook and Money-Rivlin constitutive models,respectively.The numerical models were validated by comparing the plate deflection results obtained from the experiments and were then used in the subsequent parametric study to investigate the optimum thickness of the Polyurea coating.The results indicate that back face coating contributes towards an approximately 20%reduction in the residual deformation as well as the absence of melting of the Polyurea layer,while the front-face coating can be used a means of providing additional standoff distance to the steel plates.展开更多
This paper presents a time-efficient numerical approach to modelling high explosive(HE)blastwave propagation using Computational Fluid Dynamics(CFD).One of the main issues of using conventional CFD modelling in high e...This paper presents a time-efficient numerical approach to modelling high explosive(HE)blastwave propagation using Computational Fluid Dynamics(CFD).One of the main issues of using conventional CFD modelling in high explosive simulations is the ability to accurately define the initial blastwave properties that arise from the ignition and consequent explosion.Specialised codes often employ Jones-Wilkins-Lee(JWL)or similar equation of state(EOS)to simulate blasts.However,most available CFD codes are limited in terms of EOS modelling.They are restrictive to the Ideal Gas Law(IGL)for compressible flows,which is generally unsuitable for blast simulations.To this end,this paper presents a numerical approach to simulate blastwave propagation for any generic CFD code using the IGL EOS.A new method known as the Input Cavity Method(ICM)is defined where input conditions of the high explosives are given in the form of pressure,velocity and temperature time-history curves.These time history curves are input at a certain distance from the centre of the charge.It is shown that the ICM numerical method can accurately predict over-pressure and impulse time history at measured locations for the incident,reflective and complex multiple reflection scenarios with high numerical accuracy compared to experimental measurements.The ICM is compared to the Pressure Bubble Method(PBM),a common approach to replicating initial conditions for a high explosive in Finite Volume modelling.It is shown that the ICM outperforms the PBM on multiple fronts,such as peak values and overall overpressure curve shape.Finally,the paper also presents the importance of choosing an appropriate solver between the Pressure Based Solver(PBS)and Density-Based Solver(DBS)and provides the advantages and disadvantages of either choice.In general,it is shown that the PBS can resolve and capture the interactions of blastwaves to a higher degree of resolution than the DBS.This is achieved at a much higher computational cost,showing that the DBS is much preferred for quick turnarounds.展开更多
文摘This study elaborates on the effects of matrix rigidity on the high-velocity impact behaviour of UHMWPE textile composites using experimental and numerical methods.Textile composite samples were manufactured of a plain-weave fabric(comprising Spectra?1000 fibres)and four different matrix materials.High-velocity impact tests were conducted by launching a spherical steel projectile to strike on the prepared samples via a gas gun.The experimental results showed that the textile composites gradually changed from a membrane stretching mode to a plate bending mode as the matrix rigidity and thickness increased.The composites deformed in the membrane stretching mode had higher impact resistance and energy absorption capacity,and it was found that the average energy absorption per ply was much higher in this mode,although the number of broken yarns was smaller in the perforated samples.Moreover,the flexible matrix composites always had higher perforation resistance but larger deformation than the rigid matrix counterparts in the tested thickness and velocity range.A novel numerical modelling approach with enhanced computational efficiency was proposed to simulate textile composites in mesoscale resolution.The simulation results revealed that stress and strain development in the more rigid matrix composite was localised in the vicinity of the impact location,leading to larger local deformation and inferior perforation resistance.
基金Projects(50909057,51208294,41372319)supported by the National Natural Science Foundation of ChinaProject(15ZZ081)supported by Innovation Program of Shanghai Municipal Education Commission,ChinaProject(20131129)supported by Innovation Program of Shanghai Postgraduate Education,China
文摘A micromechanical investigation on simple shear behavior of dense granular assemblies was carried out by discrete element method.Three series of numerical tests were performed to examine the effects of initial porosity,vertical stress and particle shape on simple shear behavior of the samples,respectively.It was found that during simple shear the directions of principal stress and principal strain increment rotate differently with shear strain level.The non-coaxiality between the two directions decreases with strain level and may greatly affect the shear behavior of the assemblies,especially their peak friction angles.The numerical modelling also reveals that the rotation of the principal direction of fabric anisotropy lags behind that of the major principal stress direction during simple shear,which is described as fabric hyteresis effect.The degrees of fabric and interparticle contact force anisotropies increase as particle angularity increases,whereas the orientations of these anisotropies have not been significantly influenced by particle shape.An extended stress–dilatancy relationship based on ROWE-DAVIS framework was proposed to consider the non-coaxiality effect under principal stress rotation.The model was validated by present numerical results as well as some published physical test and numerical modelled data.
文摘Incorporating elastomers such as polymers in protective structures to withstand high energetic dynamic loads,has gained significant interest.The main objective of this study is to investigate the influence of a Polyurea coating towards the blast-induced response in steel plates.As such,Polyurea coated steel plates were tested under near-field blast loads,produced by the detonation of 1 kg of spherical nitromethane charges,at a standoff distance of 150 mm.Mild steel(XLERPLATE 350)and high-strength steel(BIS80)plates with thicknesses of 10 mm were Polyurea coated with thicknesses of 6 mm and 12 mm on either the front(facing the charge)or the back face.The deformation profiles were measured using 3D scanning.Numerical simulations were performed using the non-linear finite element code LS-DYNA.The strain-dependent behaviour of the steel and Polyurea were represented by Johnson-cook and Money-Rivlin constitutive models,respectively.The numerical models were validated by comparing the plate deflection results obtained from the experiments and were then used in the subsequent parametric study to investigate the optimum thickness of the Polyurea coating.The results indicate that back face coating contributes towards an approximately 20%reduction in the residual deformation as well as the absence of melting of the Polyurea layer,while the front-face coating can be used a means of providing additional standoff distance to the steel plates.
文摘This paper presents a time-efficient numerical approach to modelling high explosive(HE)blastwave propagation using Computational Fluid Dynamics(CFD).One of the main issues of using conventional CFD modelling in high explosive simulations is the ability to accurately define the initial blastwave properties that arise from the ignition and consequent explosion.Specialised codes often employ Jones-Wilkins-Lee(JWL)or similar equation of state(EOS)to simulate blasts.However,most available CFD codes are limited in terms of EOS modelling.They are restrictive to the Ideal Gas Law(IGL)for compressible flows,which is generally unsuitable for blast simulations.To this end,this paper presents a numerical approach to simulate blastwave propagation for any generic CFD code using the IGL EOS.A new method known as the Input Cavity Method(ICM)is defined where input conditions of the high explosives are given in the form of pressure,velocity and temperature time-history curves.These time history curves are input at a certain distance from the centre of the charge.It is shown that the ICM numerical method can accurately predict over-pressure and impulse time history at measured locations for the incident,reflective and complex multiple reflection scenarios with high numerical accuracy compared to experimental measurements.The ICM is compared to the Pressure Bubble Method(PBM),a common approach to replicating initial conditions for a high explosive in Finite Volume modelling.It is shown that the ICM outperforms the PBM on multiple fronts,such as peak values and overall overpressure curve shape.Finally,the paper also presents the importance of choosing an appropriate solver between the Pressure Based Solver(PBS)and Density-Based Solver(DBS)and provides the advantages and disadvantages of either choice.In general,it is shown that the PBS can resolve and capture the interactions of blastwaves to a higher degree of resolution than the DBS.This is achieved at a much higher computational cost,showing that the DBS is much preferred for quick turnarounds.
