Zeolites NaY and Ce（IV）Y were employed as adsorbents to remove organic sulfur compounds from model gasoline （MG） solutions with and without toluene in static adsorption experiments at room temperature （RT） and a...Zeolites NaY and Ce（IV）Y were employed as adsorbents to remove organic sulfur compounds from model gasoline （MG） solutions with and without toluene in static adsorption experiments at room temperature （RT） and atmospheric pressure. The adsorbents were characterized by XRD, XRF and pyridine infrared spectrum （IR）. The adsorption experiments show that the desulfurization performance of Ce（IV）Y is much better than that of NaY. The sulfur removal over both NaY and Ce（IV）Y decreases with the increase of toluene concentration in MG, however, the decline tendency on Ce（IV）Y is smooth, and it is steep on NaY. FT-IR spectra of thiophene adsorption indicate that thiophene molecules are mainly adsorbed on NaY via π electron interaction, but on Ce（IV）Y, in addition to the π electron interaction, both Ce^4＋-S direct interaction and protonation of thiophene also play important roles. Toluene molecules are adsorbed on NaY also via π electron interaction. Although the amount of Bronsted acid sites is increased due to the introduction of Ce^4＋ ions into NaY zeolite, it is not found to influence the adsorption mode of toluene over Ce（IV）Y. Compared with NaY zeolite, the improved desulfurization performance over Ce（IV）Y for removing organic sulfur compounds from MG solution, especially those containing large amount of aromatics, may be ascribed to the direct Ce（IV）-S interaction, which is much resistant to the influence resulted from toluene adsorption.展开更多
Hierarchical beta zeolites with SiO2/Al2O3 molar ratios of 16 to 25 were obtained by alkaline treatment in NaOH solution. The effects of treatment temperature on crystallinity, textural properties and chemical composi...Hierarchical beta zeolites with SiO2/Al2O3 molar ratios of 16 to 25 were obtained by alkaline treatment in NaOH solution. The effects of treatment temperature on crystallinity, textural properties and chemical composites were studied by XRD, N2 sorption, FT-IR and XRF techniques. The desulfurization performance of parent and alkaline-treated beta zeolites was investigated by static absorption in four model fuels, containing four sulfur compounds of different molecular sizes like thiophene （TP）, 3-methylthiophene （3-MT）, benzothiophene （BT） and dibenzothiophene （DBT）, respectively. The crystallinity was observed to be successfully maintained when the treatment temperature was below 50 ℃. Mesoporosity of beta zeolite was evidently developed with alkaline treatment. The formation of mesopore remarkably improved the desulfurization performance for TP, 3-MT, BT and DBT, especially for DBT with larger molecular diameter. Though the addition of toluene in the model fuels resulted in a significant drop of the desulfurization performance of mesoporous beta zeolite, the introduction of cerium ions to some extent mitigated the effect of toluene, which means that both the adsorbent’s porous structure and the adsorption mode are responsible for the desulfurization performance. The adsorbent of cerium ion-exchanged mesoporous beta showed about 80% recovery of desulfurization after the first regeneration.展开更多
基金supported by the Fundamental Research Funds for the Key Universities (Grant No. DUT10LK25)the National Natural Science Foundation of China (Grant No. 21106014)
文摘Zeolites NaY and Ce（IV）Y were employed as adsorbents to remove organic sulfur compounds from model gasoline （MG） solutions with and without toluene in static adsorption experiments at room temperature （RT） and atmospheric pressure. The adsorbents were characterized by XRD, XRF and pyridine infrared spectrum （IR）. The adsorption experiments show that the desulfurization performance of Ce（IV）Y is much better than that of NaY. The sulfur removal over both NaY and Ce（IV）Y decreases with the increase of toluene concentration in MG, however, the decline tendency on Ce（IV）Y is smooth, and it is steep on NaY. FT-IR spectra of thiophene adsorption indicate that thiophene molecules are mainly adsorbed on NaY via π electron interaction, but on Ce（IV）Y, in addition to the π electron interaction, both Ce^4＋-S direct interaction and protonation of thiophene also play important roles. Toluene molecules are adsorbed on NaY also via π electron interaction. Although the amount of Bronsted acid sites is increased due to the introduction of Ce^4＋ ions into NaY zeolite, it is not found to influence the adsorption mode of toluene over Ce（IV）Y. Compared with NaY zeolite, the improved desulfurization performance over Ce（IV）Y for removing organic sulfur compounds from MG solution, especially those containing large amount of aromatics, may be ascribed to the direct Ce（IV）-S interaction, which is much resistant to the influence resulted from toluene adsorption.
基金supported by the Fundamental Research Funds for the Central Universities(No.DUT10LK25)the Natural Science Foundation of China(No.21106014)
文摘Hierarchical beta zeolites with SiO2/Al2O3 molar ratios of 16 to 25 were obtained by alkaline treatment in NaOH solution. The effects of treatment temperature on crystallinity, textural properties and chemical composites were studied by XRD, N2 sorption, FT-IR and XRF techniques. The desulfurization performance of parent and alkaline-treated beta zeolites was investigated by static absorption in four model fuels, containing four sulfur compounds of different molecular sizes like thiophene （TP）, 3-methylthiophene （3-MT）, benzothiophene （BT） and dibenzothiophene （DBT）, respectively. The crystallinity was observed to be successfully maintained when the treatment temperature was below 50 ℃. Mesoporosity of beta zeolite was evidently developed with alkaline treatment. The formation of mesopore remarkably improved the desulfurization performance for TP, 3-MT, BT and DBT, especially for DBT with larger molecular diameter. Though the addition of toluene in the model fuels resulted in a significant drop of the desulfurization performance of mesoporous beta zeolite, the introduction of cerium ions to some extent mitigated the effect of toluene, which means that both the adsorbent’s porous structure and the adsorption mode are responsible for the desulfurization performance. The adsorbent of cerium ion-exchanged mesoporous beta showed about 80% recovery of desulfurization after the first regeneration.
