In architecture and urban design,solar energy plays an important role to save fossil energy and preserve environment.Passive or active use of this energy needs especial consideration in the preliminary stage of design...In architecture and urban design,solar energy plays an important role to save fossil energy and preserve environment.Passive or active use of this energy needs especial consideration in the preliminary stage of design to the probable shadows.This work will answer two questions:1) How is it possible to distinguish shadow need periods during a year in a specific climate-2) How is it possible to produce shadow in hot periods without being deprived of pleasant sunshine in cold periods-In this regard,it will introduce the usage process and opportunities of "shading mask" of Olgyay as an easy and useful graphical method in six steps.At the end,different ways of using this method in design will be discussed.Several research projects that have been done in past 30 years will support the argument as examples of this method.展开更多
The Society for the Study of Chinese Architecture,founded in 1930 by the late Qing dynasty official Zhu Qiqian,was the first research institute studying ancient Chinese architecture in China.As traditional Chinese gar...The Society for the Study of Chinese Architecture,founded in 1930 by the late Qing dynasty official Zhu Qiqian,was the first research institute studying ancient Chinese architecture in China.As traditional Chinese garden is one of the most important architecture types in ancient China,the founder Zhu Qiqian noticed this issue from the start of the Society establishment,and listed the study of traditional garden as one of the important research topics.Their works initiated the study of traditional Chinese garden research in the architectural industry in China.展开更多
Taking the bending stiffness, static sag, and geometric non-linearity into consideration, the space nonlinear vibration partial differential equations were derived. The partical differential equations were discretized...Taking the bending stiffness, static sag, and geometric non-linearity into consideration, the space nonlinear vibration partial differential equations were derived. The partical differential equations were discretized in space by finite center difference approximation, then the nonlinear ordinal differential equations were obtained. A hybrid method involving the combination of the Newmark method and the pseudo-force strategy was proposed to analyze the nonlinear transient response of the inclined cable-dampers system subjected to arbitrary dynamic loading. As an example, two typical stay cables were calculated by the present method. The results reveal both the validity and the deficiency of the viscoelasticity damper for vibration control of stay cables. The efficiency and accuracy of the proposed method is also verified by comparing the results with those obtained by using Runge-Kutta direct integration technique. A new time history analysis method is provided for the research on the stay cable vibration control.展开更多
The buckling behavior of single layer space structure is very sensitive. The joint rigidity, moreover, is one of the main factors of stability which may determine the entire failure behavior. Thus, the reasonable stif...The buckling behavior of single layer space structure is very sensitive. The joint rigidity, moreover, is one of the main factors of stability which may determine the entire failure behavior. Thus, the reasonable stiffness of joint system, which is neither total pin assumption nor perfect fix condition, is very important to apply to the real single layer space one. Therefore, the purpose of this work was to investigate the buckling behavior of single layer space structure, using the development of the upgraded stiffness matrix for the joint rigidity. To derive tangential stiffness matrix, a displacement function was assumed using translational and rotational displacement at the node. The geometrical nonlinear analysis was simulated not only with perfect model but also with imperfect one. As a result, the one and two free nodal numerical models were investigated using derived stiffness matrix. It was figured out that the buckling load increases in proportion to joint rigidity with rise-span ratio. The stability of numerical model is very sensitive with the initial imperfection, responding of bifurcation in the structure.展开更多
Vegetation plays a key role in improving wind environment of residential districts,and is helpful for creating a comfortable and beautiful living environment.The optimal design of vegetation for wind environment impro...Vegetation plays a key role in improving wind environment of residential districts,and is helpful for creating a comfortable and beautiful living environment.The optimal design of vegetation for wind environment improvement in winter was investigated by carrying out field experiments in Heqingyuan residential area in Beijing,and after that,numerical simulation with SPOTE(simulation platform for outdoor thermal environment) experiments for outdoor thermal environment of vegetation was adopted for comparison.The conclusions were summarized as follows:1) By comparing the experimental data with simulation results,it could be concluded that the wind field simulated was consistent with the actual wind field,and the flow distribution impacted by vegetation could be accurately reflected;2) The wind velocity with vegetation was lower than that without vegetation,and the wind velocity was reduced by 46%;3) By adjusting arrangement and types of vegetation in the regions with excessively large wind velocity,the pedestrian-level wind velocity could be obviously improved through the simulation and comparison.展开更多
The former studies indicate that loading rates significantly affect dynamic behavior of brittle materials,for instance,the dynamic compressive and tensile strength increase with loading rates.However,there still are m...The former studies indicate that loading rates significantly affect dynamic behavior of brittle materials,for instance,the dynamic compressive and tensile strength increase with loading rates.However,there still are many unknown or partially unknown aspects.For example,whether loading rates have effect on crack dynamic propagating behavior(propagation toughness,velocity and arrest,etc).To further explore the effect of loading rates on crack dynamic responses,a large-size single-cleavage trapezoidal open(SCTO)specimen was proposed,and impacting tests using the SCTO specimen under drop plate impact were conducted.Crack propagation gauges(CPGs)were employed in measuring impact loads,crack propagation time and velocities.In order to verify the testing result,the corresponding numerical model was established using explicit dynamic software AUTODYN,and the simulation result is basically consistent with the experimental results.The ABAQUS software was used to calculate the dynamic SIFs.The universal function was calculated by fractal method.The experimental-numerical method was employed in determining initiation toughness and propagation toughness.The results indicate that crack propagating velocities,dynamic fracture toughness and energy release rates increase with loading rates;crack delayed initiation time decreases with loading rates.展开更多
This research was conducted to study the performances of the heat and multilayer reflection insulators used for buildings in South Korea to realize eco-friendly, low-energy-consumption, green construction, and to cont...This research was conducted to study the performances of the heat and multilayer reflection insulators used for buildings in South Korea to realize eco-friendly, low-energy-consumption, green construction, and to contribute to energy consumption reduction in buildings and to the nation＇s greenhouse gas emission reduction policy （targeting 30% reduction compared to BAUCousiness as usual） by 2020）. The heat insulation performance test is about the temperatures on surfaces of test piece. The high air temperature and the low air temperature were measured to determine the overall heat transfer coefficient and thermal conductivity. The conclusions are drawn that the heat transmission coefficients for each type of existing reflection insulator are： A-1 （0.045 W/（m-K））, A-2 （0.031 W/（m.K））, A-3 （0.042 W/（m.K））, A-4 （0.078 W/（m.K））, and the average heat conductivity is 0.049 W/（m-K）; The heat conductivity for each type of Styrofoam insulator are 0.030 W/（m.K） for B-l, 0.032 W/（m-K） for B-2, 0.037 W/（m＇K） for B-3, 0.037 W/（m.K） for B-4, and the average heat conductivity is 0.035 W/（m＇K） regardless of the thickness of the insulator; The heat conductivity values of the multilayer reflection insulators are converted based on the thickness and type C-1 （0.020 W/（m.K））, C-2 （0.018 W/（m.K））, C-3 （0.016 W/（m.K））, and C-4 （0.012 W/（m.K））; The multilayer reflection insulator keeps the indoor-side surface temperature high （during winter） or low （in summer）, enhances the comfort of the building occupants, and conducts heating and moisture resistance to prevent dew condensation on the glass-outer-wall surface.展开更多
Before-after study with the empirical Bayes(EB)method is the state-of-the-art approach for estimating crash modification factors(CMFs).The EB method not only addresses the regression-to-the-mean bias,but also improves...Before-after study with the empirical Bayes(EB)method is the state-of-the-art approach for estimating crash modification factors(CMFs).The EB method not only addresses the regression-to-the-mean bias,but also improves accuracy.However,the performance of the CMFs derived from the EB method has never been fully investigated.This study aims to examine the accuracy of CMFs estimated with the EB method.Artificial realistic data(ARD)and real crash data are used to evaluate the CMFs.The results indicate that:1)The CMFs derived from the EB before-after method are nearly the same as the true values.2)The estimated CMF standard errors do not reflect the true values.The estimation remains at the same level regardless of the pre-assumed CMF standard error.The EB before-after study is not sensitive to the variation of CMF among sites.3)The analyses with real-world traffic and crash data with a dummy treatment indicate that the EB method tends to underestimate the standard error of the CMF.Safety researchers should recognize that the CMF variance may be biased when evaluating safety effectiveness by the EB method.It is necessary to revisit the algorithm for estimating CMF variance with the EB method.展开更多
In order to assess the differences between the human body thermal sensation in naturally ventilated space and that in air-conditioned space,the fuzzy evaluation model was adopted in the research of thermal sensation i...In order to assess the differences between the human body thermal sensation in naturally ventilated space and that in air-conditioned space,the fuzzy evaluation model was adopted in the research of thermal sensation in naturally ventilated space.Based on the questionnaires and field measurements,the membership functions were presented by the statistic of the covering frequency to the fuzzy subset.Dry-bulb temperature was taken as the only independent variable for membership functions.The maximum values of membership grades are all at 0.5 or so,which is a distinction character on thermal comfort of naturally ventilated space.By the calculating results of membership grades value to different fuzzy evaluation subsets,the Predicted Mean Vote(PMV)was obtained.Furthermore,energy coefficient(Ea)was introduced to calculate the energy consumption,and the prediction methods of residential building energy consumption were also discussed.Finally,the importance of evaluation model of thermal sense is shown through the energy consumption prediction in a specific residential building.展开更多
This paper focused on residential district planning process.Using GIS and SketchUp software,a common digital relief map model of a residential district was created,and the air distribution(both velocity and temperatur...This paper focused on residential district planning process.Using GIS and SketchUp software,a common digital relief map model of a residential district was created,and the air distribution(both velocity and temperature)within this residential district was established by CFD simulation.So,the velocity and temperature of the air at any location within the residential district,as well as the worse flow area and overheat area can be clearly presented.An index of micro thermal environment for the air distribution evaluation was established.Depending on a certain residential district planning model,from the air parameters of the micro environment at any location within the residential district,such as air velocity and air temperature,the index of micro thermal environment was obtained by certain principles and data processing process.By this index,the residential district planning scheme was evaluated corresponding to the thermal characteristics of the residential district.If this index is not good enough or unsatisfied,the residential district planning idea and process can be changed or improved accordingly in order to get a better thermal characteristics of the residential district judged by the established evaluation index system.展开更多
This work aims at finding pedestrian walking characteristics at U-type stairs according to the width change of stairs and appropriate spot for installing piezoelectric energy harvesting.The number of pedestrian at two...This work aims at finding pedestrian walking characteristics at U-type stairs according to the width change of stairs and appropriate spot for installing piezoelectric energy harvesting.The number of pedestrian at two kinds of stairs(one is stairs with 1.5 m in width and the other is stairs with 3 m in width) was estimated by calculating the number of steps on the stairs by a zone which is divided into 30 cm×30 cm.The result shows high density in the middle in the case of narrow stairs but traffic is concentrated on stair inside(pillar side) in stairs with large width.In conclusion,the location for installation of piezoelectric energy harvesting system should be considered differently on stairs width and the number of installation depends on total expected traffic and the expected traffic for a device.展开更多
In this study,based on the established heat transfer and mechanical stress models,thermal stress distribution of glazing unit filled with paraffin was studied for various temperature differences between indoor and out...In this study,based on the established heat transfer and mechanical stress models,thermal stress distribution of glazing unit filled with paraffin was studied for various temperature differences between indoor and outdoor conditions.The strain produced on the surface of glazing unit filled with paraffin varies greatly in the outdoor temperature range of-30℃-40 ℃.Furthermore,phase change material(PCM) layer between the glass panes significantly affects the strain values at different temperatures,which can respectively reach up to about 250×10^(-6) and down to-300×10^(-6) for tensile and compressive strains once the paraffin is in liquid state.Additionally,impacts of boundary conditions on the strain values are more pronounced within the distance of 0.01 m from the edges of the glazing window.The presented model and outcomes can be used as a guide to simulate thermal stress in glazing units filled with paraffin.展开更多
To study the effects of perceived control on human thermal sensation and thermal comfort in heated environments,a psychological experiment was conducted.In total,24 subjects participated in an experiment.The experimen...To study the effects of perceived control on human thermal sensation and thermal comfort in heated environments,a psychological experiment was conducted.In total,24 subjects participated in an experiment.The experiment consisted of two cases in which the indoor temperature was set at 18℃ with different cold radiation temperatures.The experiment lasted for 120 min and was divided into three phases,adaptation,without perceived control and perceived control.In the second phase,the subjects were told in advance that the indoor temperature could not be adjusted.In the third phase,subjects were told that they could adjust the indoor temperature to meet their own thermal expectations,but the indoor temperature could not actually be changed.The results showed that the effect of perceived control on thermal sensation was related to the thermal expectation.For people with strong expectations for a neutral environment,perceived control improved their thermal sensation by satisfying their thermal expectations.For people with low thermal expectations,perceived control reduced their thermal tolerance to the environment,eventually leading to thermal discomfort.These new findings provide more supports for the importance of psychological effects and a reference for the personal control of heating temperatures.展开更多
In recent years,regional integration of Chinese cities has gradually developed.Meanwhile,metropolitan areas and urban agglomerations have taken shape.On the one hand,the development of the metropolitan area has brough...In recent years,regional integration of Chinese cities has gradually developed.Meanwhile,metropolitan areas and urban agglomerations have taken shape.On the one hand,the development of the metropolitan area has brought about urban spatial expansion,as well as population and economic growth.On the other hand,it has led to problems such as the urban sprawl and suburbanization,increasing pressure on environmental resources,and the decline of urban central areas.Under this background,the Guangdong-Hong Kong-Macao Greater Bay Area Development Plan Outline proposes to accelerate the integration of Guangzhou-Foshan(Guang Fo)Metropolitan Coordinating Region(MCR),and to construct a networked space pattern driven by urban poles and shafts.Based on the academic research of Metropolitan Coordinating Region(MCR),as well as the theory of urban spatial structure and morphology,this study focus on urban spatial patterns and elements in different scales,from two individual cites(Guangzhou and Foshan),Guang Fo MCR,to Guangdong-Hong Kong-Macao(GHM)Greater Bay Area.With GIS and the mapping method,the spatial elements such as green space,water system,built-up area,road network,rail transit network and main pivot points of the Guang Fo MCR are classified,laid out individually and again overlaid in order to figure out the relationship of these elements.At the same time,through the comparative case study of the Randstad MCR in the Netherlands,the enlightenment of solving the development problem of MCR is hopefully to be obtained.As delta cities,the Guang Fo MCR is cut by the multi-channel water network,while the urban built-up area is concentrated in the middle of the MCR and spread out along the traffic corridor to the suburban district.The traffic structure of the Guang Fo MCR is characterized by the outward radiation of the central area of Guangzhou and Foshan.Simultaneously,the traffic connection between Guangzhou and Foshan is relatively weak.Compared with the polycentric spatial structure,which is called Decentralized Compact pattern of Randstad MCR,the Guang Fo MCR presents a city form with little hierarchy but homogeneity,and its urban space is disorderly spread.The bluegreen system of water and vegetation is fragmented because of the urban invasion in Guang Fo MCR,while the green heart in central Randstad is well preserved.As a result,it is well advised to explore a more resilient and ecological urban development in Guang Fo MCR.展开更多
In order to calculate the air temperature of the near surface layer in urban environment,the surface layer air was divided into several sections in the vertical direction,and some energy balance equations were develop...In order to calculate the air temperature of the near surface layer in urban environment,the surface layer air was divided into several sections in the vertical direction,and some energy balance equations were developed for each air layer,in which the heat exchange due to vertical turbulence and horizontal air flow was taken into account.Then,the vertical temperature distribution of the surface layer air was obtained through the coupled calculation using the energy balance equations of underlying surfaces and building walls.Moreover,the measured air temperatures in a small area(with a horizontal scale of less than 500 m) and a large area(with a horizontal scale of more than 1 000 m) in Guangzhou in summer were used to validate the proposed model.The calculated results accord well with the measured ones,with a maximum relative error of 4.18%.It is thus concluded that the proposed model is a high-accuracy method to theoretically analyze the urban heat island and the thermal environment.展开更多
The article combines institutional change and social participation of the subjects. By investigating the expanding of community subject and gradually cultivating their ability to participate,we can test the achievemen...The article combines institutional change and social participation of the subjects. By investigating the expanding of community subject and gradually cultivating their ability to participate,we can test the achievements of community development in our country,and lay a foundation for reaching the social development goals.展开更多
For the release of hazardous contaminant indoors, source identification is critical for developing effective response measures. A method which can quickly and accurately identify the position, emission rate, and relea...For the release of hazardous contaminant indoors, source identification is critical for developing effective response measures. A method which can quickly and accurately identify the position, emission rate, and release time of a single constant contaminant source by using real sensors was presented. The method was numerically demonstrated and validated by a case study of contaminant release in a three-dimensional office. The effects of the measurement errors and total sampling period of sensor on the performance of source identification were thoroughly studied. The results indicate that the adverse effects of the measurement errors can be mitigated by extending the total sampling period. For reaching a desirable accuracy of source identification, the total sampling period should exceed a certain threshold, which can be determined by repeatedly running the identification method tmtil the results tend to be stable. The method presented can contribute to develop an onsite source identification system for protecting occupants from indoor releases.展开更多
For the rural housing in Yanbian region in winter,the indoor thermal environment is bad but the energy consumption is high.And in order to solve the problem,the life particularities of the local residents,such as the ...For the rural housing in Yanbian region in winter,the indoor thermal environment is bad but the energy consumption is high.And in order to solve the problem,the life particularities of the local residents,such as the inhabitation custom and the different living ways,were analyzed.The comfortable temperature felt by the local residents was surveyed and summarized according to different age's stage.The subjective comfortable temperature was calculated by using the thermal comfort formula set up by D.A.Mcintyre.The result shows that the comfortable temperature between the survey and the calculation is different.After analyzing the survey and the result calculations,the range of local indoor comfortable temperature was given,which provides a reference basis for calculating the thermal comfort and energy efficiency as well as designing green rural houses.展开更多
In order to simultaneously measure the initiation toughness of pure mode Ⅰ and mode Ⅱ cracks in one specimen,a large-size double-cracked concave-convex plate(DCCP)specimen configuration was proposed.Impacting tests ...In order to simultaneously measure the initiation toughness of pure mode Ⅰ and mode Ⅱ cracks in one specimen,a large-size double-cracked concave-convex plate(DCCP)specimen configuration was proposed.Impacting tests were implemented in the drop plate impact device.Strain gauges were employed to measure impact loads and crack initiation time.The corresponding numerical model was established by using the dynamic finite difference program AUTODYN,and the experimental-numerical method and ABAQUS code were utilized to obtain the initial fracture toughness of the crack.Using experiments and numerical research,we concluded that the DCCP specimen is suitable for measuring the initial fracture toughness of pure mode Ⅰ and mode Ⅱ cracks at the same time;the dynamic initiation toughness increases with the increase of loading rate and the crack initiation time decreases with increasing loading rate;the initiation toughness of mode Ⅱ crack is 0.5 times that of mode Ⅰ crack when subjected to the same loading rate.For the pre-crack in the vicinity of the bottom of a sample,when its length increases from 20 to 100 mm,the dynamic initiation toughness of the pure mode Ⅰ crack gradually decreases,and the longer the lower crack length is,the easier the crack would initiate,but the dynamic initiation toughness of pure mode Ⅱ crack varies little.展开更多
The present work investigates higher order stress,strain and deformation analyses of a shear deformable doubly curved shell manufactures by a Copper(Cu)core reinforced with graphene origami auxetic metamaterial subjec...The present work investigates higher order stress,strain and deformation analyses of a shear deformable doubly curved shell manufactures by a Copper(Cu)core reinforced with graphene origami auxetic metamaterial subjected to mechanical and thermal loads.The effective material properties of the graphene origami auxetic reinforced Cu matrix are developed using micromechanical models cooperate both material properties of graphene and Cu in terms of temperature,volume fraction and folding degree.The principle of virtual work is used to derive governing equations with accounting thermal loading.The numerical results are analytically obtained using Navier's technique to investigate impact of significant parameters such as thermal loading,graphene amount,folding degree and directional coordinate on the stress,strain and deformation responses of the structure.The graphene origami materials may be used in aerospace vehicles and structures and defence technology because of their low weight and high stiffness.A verification study is presented for approving the formulation,solution methodology and numerical results.展开更多
文摘In architecture and urban design,solar energy plays an important role to save fossil energy and preserve environment.Passive or active use of this energy needs especial consideration in the preliminary stage of design to the probable shadows.This work will answer two questions:1) How is it possible to distinguish shadow need periods during a year in a specific climate-2) How is it possible to produce shadow in hot periods without being deprived of pleasant sunshine in cold periods-In this regard,it will introduce the usage process and opportunities of "shading mask" of Olgyay as an easy and useful graphical method in six steps.At the end,different ways of using this method in design will be discussed.Several research projects that have been done in past 30 years will support the argument as examples of this method.
文摘The Society for the Study of Chinese Architecture,founded in 1930 by the late Qing dynasty official Zhu Qiqian,was the first research institute studying ancient Chinese architecture in China.As traditional Chinese garden is one of the most important architecture types in ancient China,the founder Zhu Qiqian noticed this issue from the start of the Society establishment,and listed the study of traditional garden as one of the important research topics.Their works initiated the study of traditional Chinese garden research in the architectural industry in China.
文摘Taking the bending stiffness, static sag, and geometric non-linearity into consideration, the space nonlinear vibration partial differential equations were derived. The partical differential equations were discretized in space by finite center difference approximation, then the nonlinear ordinal differential equations were obtained. A hybrid method involving the combination of the Newmark method and the pseudo-force strategy was proposed to analyze the nonlinear transient response of the inclined cable-dampers system subjected to arbitrary dynamic loading. As an example, two typical stay cables were calculated by the present method. The results reveal both the validity and the deficiency of the viscoelasticity damper for vibration control of stay cables. The efficiency and accuracy of the proposed method is also verified by comparing the results with those obtained by using Runge-Kutta direct integration technique. A new time history analysis method is provided for the research on the stay cable vibration control.
基金Project(12 High-tech Urban C11) supported by High-tech Urban Development Program of Ministry of Land,Transport and Maritime Affairs,Korea
文摘The buckling behavior of single layer space structure is very sensitive. The joint rigidity, moreover, is one of the main factors of stability which may determine the entire failure behavior. Thus, the reasonable stiffness of joint system, which is neither total pin assumption nor perfect fix condition, is very important to apply to the real single layer space one. Therefore, the purpose of this work was to investigate the buckling behavior of single layer space structure, using the development of the upgraded stiffness matrix for the joint rigidity. To derive tangential stiffness matrix, a displacement function was assumed using translational and rotational displacement at the node. The geometrical nonlinear analysis was simulated not only with perfect model but also with imperfect one. As a result, the one and two free nodal numerical models were investigated using derived stiffness matrix. It was figured out that the buckling load increases in proportion to joint rigidity with rise-span ratio. The stability of numerical model is very sensitive with the initial imperfection, responding of bifurcation in the structure.
基金Project(50878111) supported by the National Natural Science Foundation of China
文摘Vegetation plays a key role in improving wind environment of residential districts,and is helpful for creating a comfortable and beautiful living environment.The optimal design of vegetation for wind environment improvement in winter was investigated by carrying out field experiments in Heqingyuan residential area in Beijing,and after that,numerical simulation with SPOTE(simulation platform for outdoor thermal environment) experiments for outdoor thermal environment of vegetation was adopted for comparison.The conclusions were summarized as follows:1) By comparing the experimental data with simulation results,it could be concluded that the wind field simulated was consistent with the actual wind field,and the flow distribution impacted by vegetation could be accurately reflected;2) The wind velocity with vegetation was lower than that without vegetation,and the wind velocity was reduced by 46%;3) By adjusting arrangement and types of vegetation in the regions with excessively large wind velocity,the pedestrian-level wind velocity could be obviously improved through the simulation and comparison.
基金Projects(11672194,U19A2098)supported by the National Natural Science Foundation of ChinaProject(2018SCU12047)supported by Fundamental Research Funds for the Central Universities,ChinaProject(2018JZ0036)supported by the Project of Science and Technology of Sichuan Province,China。
文摘The former studies indicate that loading rates significantly affect dynamic behavior of brittle materials,for instance,the dynamic compressive and tensile strength increase with loading rates.However,there still are many unknown or partially unknown aspects.For example,whether loading rates have effect on crack dynamic propagating behavior(propagation toughness,velocity and arrest,etc).To further explore the effect of loading rates on crack dynamic responses,a large-size single-cleavage trapezoidal open(SCTO)specimen was proposed,and impacting tests using the SCTO specimen under drop plate impact were conducted.Crack propagation gauges(CPGs)were employed in measuring impact loads,crack propagation time and velocities.In order to verify the testing result,the corresponding numerical model was established using explicit dynamic software AUTODYN,and the simulation result is basically consistent with the experimental results.The ABAQUS software was used to calculate the dynamic SIFs.The universal function was calculated by fractal method.The experimental-numerical method was employed in determining initiation toughness and propagation toughness.The results indicate that crack propagating velocities,dynamic fracture toughness and energy release rates increase with loading rates;crack delayed initiation time decreases with loading rates.
基金Project(NRF-2010-0024155) supported by the National Research Foundation of Korea
文摘This research was conducted to study the performances of the heat and multilayer reflection insulators used for buildings in South Korea to realize eco-friendly, low-energy-consumption, green construction, and to contribute to energy consumption reduction in buildings and to the nation＇s greenhouse gas emission reduction policy （targeting 30% reduction compared to BAUCousiness as usual） by 2020）. The heat insulation performance test is about the temperatures on surfaces of test piece. The high air temperature and the low air temperature were measured to determine the overall heat transfer coefficient and thermal conductivity. The conclusions are drawn that the heat transmission coefficients for each type of existing reflection insulator are： A-1 （0.045 W/（m-K））, A-2 （0.031 W/（m.K））, A-3 （0.042 W/（m.K））, A-4 （0.078 W/（m.K））, and the average heat conductivity is 0.049 W/（m-K）; The heat conductivity for each type of Styrofoam insulator are 0.030 W/（m.K） for B-l, 0.032 W/（m-K） for B-2, 0.037 W/（m＇K） for B-3, 0.037 W/（m.K） for B-4, and the average heat conductivity is 0.035 W/（m＇K） regardless of the thickness of the insulator; The heat conductivity values of the multilayer reflection insulators are converted based on the thickness and type C-1 （0.020 W/（m.K））, C-2 （0.018 W/（m.K））, C-3 （0.016 W/（m.K））, and C-4 （0.012 W/（m.K））; The multilayer reflection insulator keeps the indoor-side surface temperature high （during winter） or low （in summer）, enhances the comfort of the building occupants, and conducts heating and moisture resistance to prevent dew condensation on the glass-outer-wall surface.
基金Project(51978082)supported by the National Natural Science Foundation of ChinaProject(19B022)supported by the Outstanding Youth Foundation of Hunan Education Department,ChinaProject(2019QJCZ056)supported by the Young Teacher Development Foundation of Changsha University of Science&Technology,China。
文摘Before-after study with the empirical Bayes(EB)method is the state-of-the-art approach for estimating crash modification factors(CMFs).The EB method not only addresses the regression-to-the-mean bias,but also improves accuracy.However,the performance of the CMFs derived from the EB method has never been fully investigated.This study aims to examine the accuracy of CMFs estimated with the EB method.Artificial realistic data(ARD)and real crash data are used to evaluate the CMFs.The results indicate that:1)The CMFs derived from the EB before-after method are nearly the same as the true values.2)The estimated CMF standard errors do not reflect the true values.The estimation remains at the same level regardless of the pre-assumed CMF standard error.The EB before-after study is not sensitive to the variation of CMF among sites.3)The analyses with real-world traffic and crash data with a dummy treatment indicate that the EB method tends to underestimate the standard error of the CMF.Safety researchers should recognize that the CMF variance may be biased when evaluating safety effectiveness by the EB method.It is necessary to revisit the algorithm for estimating CMF variance with the EB method.
基金Supported by National Natural Science Foundation of China(50508035)the National Science Foundation for Post-doctoral Scientists of China(20070411121)
文摘In order to assess the differences between the human body thermal sensation in naturally ventilated space and that in air-conditioned space,the fuzzy evaluation model was adopted in the research of thermal sensation in naturally ventilated space.Based on the questionnaires and field measurements,the membership functions were presented by the statistic of the covering frequency to the fuzzy subset.Dry-bulb temperature was taken as the only independent variable for membership functions.The maximum values of membership grades are all at 0.5 or so,which is a distinction character on thermal comfort of naturally ventilated space.By the calculating results of membership grades value to different fuzzy evaluation subsets,the Predicted Mean Vote(PMV)was obtained.Furthermore,energy coefficient(Ea)was introduced to calculate the energy consumption,and the prediction methods of residential building energy consumption were also discussed.Finally,the importance of evaluation model of thermal sense is shown through the energy consumption prediction in a specific residential building.
文摘This paper focused on residential district planning process.Using GIS and SketchUp software,a common digital relief map model of a residential district was created,and the air distribution(both velocity and temperature)within this residential district was established by CFD simulation.So,the velocity and temperature of the air at any location within the residential district,as well as the worse flow area and overheat area can be clearly presented.An index of micro thermal environment for the air distribution evaluation was established.Depending on a certain residential district planning model,from the air parameters of the micro environment at any location within the residential district,such as air velocity and air temperature,the index of micro thermal environment was obtained by certain principles and data processing process.By this index,the residential district planning scheme was evaluated corresponding to the thermal characteristics of the residential district.If this index is not good enough or unsatisfied,the residential district planning idea and process can be changed or improved accordingly in order to get a better thermal characteristics of the residential district judged by the established evaluation index system.
基金Project(NRF-2011-0000868)supported by the National Research Foundation of Korea(NRF)funded by the Korea government(MEST)Project(2011-0003968)supported by Basic Science Research Program through the National Research Foundation of Korea(NRF)
文摘This work aims at finding pedestrian walking characteristics at U-type stairs according to the width change of stairs and appropriate spot for installing piezoelectric energy harvesting.The number of pedestrian at two kinds of stairs(one is stairs with 1.5 m in width and the other is stairs with 3 m in width) was estimated by calculating the number of steps on the stairs by a zone which is divided into 30 cm×30 cm.The result shows high density in the middle in the case of narrow stairs but traffic is concentrated on stair inside(pillar side) in stairs with large width.In conclusion,the location for installation of piezoelectric energy harvesting system should be considered differently on stairs width and the number of installation depends on total expected traffic and the expected traffic for a device.
基金Project(52078110) supported by the National Natural Science Foundation of ChinaProject(2018KYQD15) supported by Beibu Gulf Universityt,China。
文摘In this study,based on the established heat transfer and mechanical stress models,thermal stress distribution of glazing unit filled with paraffin was studied for various temperature differences between indoor and outdoor conditions.The strain produced on the surface of glazing unit filled with paraffin varies greatly in the outdoor temperature range of-30℃-40 ℃.Furthermore,phase change material(PCM) layer between the glass panes significantly affects the strain values at different temperatures,which can respectively reach up to about 250×10^(-6) and down to-300×10^(-6) for tensile and compressive strains once the paraffin is in liquid state.Additionally,impacts of boundary conditions on the strain values are more pronounced within the distance of 0.01 m from the edges of the glazing window.The presented model and outcomes can be used as a guide to simulate thermal stress in glazing units filled with paraffin.
基金Project(2018YFC0704500)supported by the National Key R&D Program of China during the 13th Five-Year Plan Period。
文摘To study the effects of perceived control on human thermal sensation and thermal comfort in heated environments,a psychological experiment was conducted.In total,24 subjects participated in an experiment.The experiment consisted of two cases in which the indoor temperature was set at 18℃ with different cold radiation temperatures.The experiment lasted for 120 min and was divided into three phases,adaptation,without perceived control and perceived control.In the second phase,the subjects were told in advance that the indoor temperature could not be adjusted.In the third phase,subjects were told that they could adjust the indoor temperature to meet their own thermal expectations,but the indoor temperature could not actually be changed.The results showed that the effect of perceived control on thermal sensation was related to the thermal expectation.For people with strong expectations for a neutral environment,perceived control improved their thermal sensation by satisfying their thermal expectations.For people with low thermal expectations,perceived control reduced their thermal tolerance to the environment,eventually leading to thermal discomfort.These new findings provide more supports for the importance of psychological effects and a reference for the personal control of heating temperatures.
基金the financial support given by National Natural Science Foundation Projects of International Cooperation and Exchange of China(No.51761135025)National Natural Science Foundation General Program of China(No.51778233)Science and Technology Program of Guangzhou,China(No.201707020041)
文摘In recent years,regional integration of Chinese cities has gradually developed.Meanwhile,metropolitan areas and urban agglomerations have taken shape.On the one hand,the development of the metropolitan area has brought about urban spatial expansion,as well as population and economic growth.On the other hand,it has led to problems such as the urban sprawl and suburbanization,increasing pressure on environmental resources,and the decline of urban central areas.Under this background,the Guangdong-Hong Kong-Macao Greater Bay Area Development Plan Outline proposes to accelerate the integration of Guangzhou-Foshan(Guang Fo)Metropolitan Coordinating Region(MCR),and to construct a networked space pattern driven by urban poles and shafts.Based on the academic research of Metropolitan Coordinating Region(MCR),as well as the theory of urban spatial structure and morphology,this study focus on urban spatial patterns and elements in different scales,from two individual cites(Guangzhou and Foshan),Guang Fo MCR,to Guangdong-Hong Kong-Macao(GHM)Greater Bay Area.With GIS and the mapping method,the spatial elements such as green space,water system,built-up area,road network,rail transit network and main pivot points of the Guang Fo MCR are classified,laid out individually and again overlaid in order to figure out the relationship of these elements.At the same time,through the comparative case study of the Randstad MCR in the Netherlands,the enlightenment of solving the development problem of MCR is hopefully to be obtained.As delta cities,the Guang Fo MCR is cut by the multi-channel water network,while the urban built-up area is concentrated in the middle of the MCR and spread out along the traffic corridor to the suburban district.The traffic structure of the Guang Fo MCR is characterized by the outward radiation of the central area of Guangzhou and Foshan.Simultaneously,the traffic connection between Guangzhou and Foshan is relatively weak.Compared with the polycentric spatial structure,which is called Decentralized Compact pattern of Randstad MCR,the Guang Fo MCR presents a city form with little hierarchy but homogeneity,and its urban space is disorderly spread.The bluegreen system of water and vegetation is fragmented because of the urban invasion in Guang Fo MCR,while the green heart in central Randstad is well preserved.As a result,it is well advised to explore a more resilient and ecological urban development in Guang Fo MCR.
基金Project(50808083) supported by the National Natural Science Foundation of China
文摘In order to calculate the air temperature of the near surface layer in urban environment,the surface layer air was divided into several sections in the vertical direction,and some energy balance equations were developed for each air layer,in which the heat exchange due to vertical turbulence and horizontal air flow was taken into account.Then,the vertical temperature distribution of the surface layer air was obtained through the coupled calculation using the energy balance equations of underlying surfaces and building walls.Moreover,the measured air temperatures in a small area(with a horizontal scale of less than 500 m) and a large area(with a horizontal scale of more than 1 000 m) in Guangzhou in summer were used to validate the proposed model.The calculated results accord well with the measured ones,with a maximum relative error of 4.18%.It is thus concluded that the proposed model is a high-accuracy method to theoretically analyze the urban heat island and the thermal environment.
基金the staged achievement of the MOE(Ministry of Education in China)Project of Humanities and Social Sciences(Project No.11YJC 840052)
文摘The article combines institutional change and social participation of the subjects. By investigating the expanding of community subject and gradually cultivating their ability to participate,we can test the achievements of community development in our country,and lay a foundation for reaching the social development goals.
基金Project(50908128) supported by the National Natural Science Foundation of ChinaProject(51125030) supported by the National Science Foundation for Distinguished Young Scholars in China
文摘For the release of hazardous contaminant indoors, source identification is critical for developing effective response measures. A method which can quickly and accurately identify the position, emission rate, and release time of a single constant contaminant source by using real sensors was presented. The method was numerically demonstrated and validated by a case study of contaminant release in a three-dimensional office. The effects of the measurement errors and total sampling period of sensor on the performance of source identification were thoroughly studied. The results indicate that the adverse effects of the measurement errors can be mitigated by extending the total sampling period. For reaching a desirable accuracy of source identification, the total sampling period should exceed a certain threshold, which can be determined by repeatedly running the identification method tmtil the results tend to be stable. The method presented can contribute to develop an onsite source identification system for protecting occupants from indoor releases.
基金Supported by National Natural Science Foundation of China(50378023)
文摘For the rural housing in Yanbian region in winter,the indoor thermal environment is bad but the energy consumption is high.And in order to solve the problem,the life particularities of the local residents,such as the inhabitation custom and the different living ways,were analyzed.The comfortable temperature felt by the local residents was surveyed and summarized according to different age's stage.The subjective comfortable temperature was calculated by using the thermal comfort formula set up by D.A.Mcintyre.The result shows that the comfortable temperature between the survey and the calculation is different.After analyzing the survey and the result calculations,the range of local indoor comfortable temperature was given,which provides a reference basis for calculating the thermal comfort and energy efficiency as well as designing green rural houses.
基金Projects(U19A2098,1210021843)supported by the National Natural Science Foundation of ChinaProject(2021SCU12130)supported by Fundamental Research Funds for the Central Universities,China+1 种基金Project(2021YJ0511)supported by the Sichuan Science and Technology Program,ChinaProjects(DESEYU202205,DESE202005)supported by the Open Fund of Key Laboratory of Deep Earth Science and Engineering,China。
文摘In order to simultaneously measure the initiation toughness of pure mode Ⅰ and mode Ⅱ cracks in one specimen,a large-size double-cracked concave-convex plate(DCCP)specimen configuration was proposed.Impacting tests were implemented in the drop plate impact device.Strain gauges were employed to measure impact loads and crack initiation time.The corresponding numerical model was established by using the dynamic finite difference program AUTODYN,and the experimental-numerical method and ABAQUS code were utilized to obtain the initial fracture toughness of the crack.Using experiments and numerical research,we concluded that the DCCP specimen is suitable for measuring the initial fracture toughness of pure mode Ⅰ and mode Ⅱ cracks at the same time;the dynamic initiation toughness increases with the increase of loading rate and the crack initiation time decreases with increasing loading rate;the initiation toughness of mode Ⅱ crack is 0.5 times that of mode Ⅰ crack when subjected to the same loading rate.For the pre-crack in the vicinity of the bottom of a sample,when its length increases from 20 to 100 mm,the dynamic initiation toughness of the pure mode Ⅰ crack gradually decreases,and the longer the lower crack length is,the easier the crack would initiate,but the dynamic initiation toughness of pure mode Ⅱ crack varies little.
基金supported by Scientific Research Project of Qiqihar University(145209130)supported by the Natural Science Foundation of Inner Mongolia Autonomous Region of China(Grant No.2023LHMS05054 and 2023LHMS05017)+3 种基金the Inner Mongolia University of Technology Natural Science Foundation of China(Grant No.DC2200000903)the Program for Innovative Research Teams in Universities of the Inner Mongolia Autonomous Region of China(Grant No.NMGIRT2213)the key technological project of Inner Mongolia(Grant No.2021GG0255 and 2021GG0259)the Fundamental Research Funds for the directly affiliated Universities of Inner Mongolia Autonomous Region(Grant No.JY20220046)。
文摘The present work investigates higher order stress,strain and deformation analyses of a shear deformable doubly curved shell manufactures by a Copper(Cu)core reinforced with graphene origami auxetic metamaterial subjected to mechanical and thermal loads.The effective material properties of the graphene origami auxetic reinforced Cu matrix are developed using micromechanical models cooperate both material properties of graphene and Cu in terms of temperature,volume fraction and folding degree.The principle of virtual work is used to derive governing equations with accounting thermal loading.The numerical results are analytically obtained using Navier's technique to investigate impact of significant parameters such as thermal loading,graphene amount,folding degree and directional coordinate on the stress,strain and deformation responses of the structure.The graphene origami materials may be used in aerospace vehicles and structures and defence technology because of their low weight and high stiffness.A verification study is presented for approving the formulation,solution methodology and numerical results.
