The shale oil reservoir is characterized by tight lithology and ultra-low permeability,and its efficient exploitation requires the technology of multi-stage and multi-cluster hydraulic fracturing in horizontal wells a...The shale oil reservoir is characterized by tight lithology and ultra-low permeability,and its efficient exploitation requires the technology of multi-stage and multi-cluster hydraulic fracturing in horizontal wells and shut-in imbibition.After multi-stage and multi-cluster hydraulic fracturing,a complex fracture network is formed,and a large volume of frac fluid is stored within the fracture network.During shut-in,imbibition and exchange between oil and water occurs under the action of the capillary force and osmotic pressure,and the formation pressure builds up in the shale reservoir.On basis of the characteristics of shale oil reservoir,we establish a model of imbibition during fracturing injection and shut-in by coupling oilewater two-phase flow and saline ion diffusion in the hydraulic fractures(HFs)network,natural fractures(NFs)and matrix system under the action of capillary force and osmotic pressure.The DFN method and the multiple continuum method are introduced to characterize fluid flow between the HF and the NF and that between the NF and the matrix respectively,which avoids the problem of a large amount of computation of seepage within the complex fracture.Then,the discrete fracture network(DFN)model and the multiple continuum model are solved with the finite element method,and it is verified in flow field,saturation field and concentration field that the models are accurate and reliable.We propose the imbibition exchange volume for quantitative evaluation of the imbibition degree and a method of calculating the imbibition exchange volume.Simulation of oil and water flow in the fracturing and shut-in stages is performed based on these models.It is found that imbibition in the shale reservoir is driven by mechanisms of pressure difference,capillary force and osmotic pressure.The osmotic pressure and capillary force only cause an increase in the imbibition rate and a reduction in the imbibition equilibrium time and do not lead to variation in the peak of imbibition exchange volume.The imbibition equilibrium time under the action of the capillary force and osmotic pressure is reduced from 150 to 45 d compared with that under the action of the pressure difference.If imbibition equilibrium is reached,low initial water saturation,strong rock compressibility,high formation water salinity and high matrix permeability enhance imbibition and exchange of oil and water in the reservoir.The leakoff volume of frac fluid is generally larger than the imbibition exchanged volume.Leakoff equilibrium occurs slightly earlier than imbibition equilibrium.The imbibition equilibrium time is mainly affected by reservoir permeability and NF density.The number of interconnected fractures mainly affects the frac fluid volume within the hydraulic fracture in the fracturing process.The stimulated reservoir volume(SRV)mainly affects frac fluid imbibition exchange in the shut-in process.展开更多
The pore-throat systems and physical properties of tight sandstone reservoirs are complex,and deposition is thought to be a fundamental control for them.In this study,the impacts of the full ranges of rock types(from ...The pore-throat systems and physical properties of tight sandstone reservoirs are complex,and deposition is thought to be a fundamental control for them.In this study,the impacts of the full ranges of rock types(from pebbly coarse sandstone to fine sandstone) on the pore structures and physical properties of the Permian tight sandstone reservoir in the eastern Ordos Basin were investigated comprehensively through a series of experiments including conventional physical testing,thin-section analysis,scanning electron microscopy,nuclear magnetic resonance analysis and high-pressure mercury injection tests.The results showed that the coarser-grained sandstones tend to have higher feldspar content and lower percentage of cements,leading to strong dissolution,weak cementation and improved porosity and permeability.The medium sandstone has the highest level of quartz and the lowest average content of feldspar,resulting in strong heterogeneity of physical properties.Only those medium sandstone reservoirs with relatively high content of feldspars have better physical properties.Additionally,the coarser-grained sandstones contain relatively large dissolution pores(nearly 200 μm),whereas the finer-grained sandstones have more intercrystalline pores with a relatively more homogeneous pore structure.The pebbly coarse sandstone and coarse sandstone reservoirs are favorable targets with best physical properties.展开更多
Tight reservoirs are typically developed by horizontal wells and multi-stage hydraulic fracturing.The conglomerate reservoir is one type of tight reservoirs,which is different from homogeneous rock,such as tight sands...Tight reservoirs are typically developed by horizontal wells and multi-stage hydraulic fracturing.The conglomerate reservoir is one type of tight reservoirs,which is different from homogeneous rock,such as tight sandstone.This is because that the existence of gravels makes conglomerate have strong hetero-geneity.Thus,it is difficult to grasp the fracture mechanism and the law of fracture propagation of conglomerate,which limits the efficient development of the conglomerate reservoir.In this paper,the fracture characteristics and factors influencing the fracturing of Mahu conglomerate were studied by uniaxial compression,acoustic emission monitoring and X-ray computed tomography(CT)scanning experiments.The results show that the fracture characteristics of conglomerates are influenced by the gravel content and cement.The conglomerate in the study area is mainly divided into carbonate cemented conglomerate and clay cemented conglomerate.The fracture complexity of carbonate cemented conglomerate first increases and then decreases with increasing gravel content.However,for clay cemented conglomerates,the fracture complexity increases over the gravel content.The crack development stress is a significant parameter in the crack assessment of conglomerates.This study is useful to understand the influence of meso-fabric characteristics of conglomerates on their fracturing and crack evolution and guides the design of hydraulic fracturing.展开更多
In the Changqing Oilfield in northwest China, when traditional petroleum exploitation encounters forestry reserves or water source protection areas, sectorial well-factory design is proposed. The most distinct feature...In the Changqing Oilfield in northwest China, when traditional petroleum exploitation encounters forestry reserves or water source protection areas, sectorial well-factory design is proposed. The most distinct feature of a sectorial well-factory is the deviation of the well from the minimum horizontal principal stress, resulting in hydraulic fracture deflection after the initiation, along with possible well interference (i.e., fracture hit) and fracture coalescence in the oblique wells. Four indexes describing well deflection are then proposed according to fracture morphology. Several fracturing designs, including stage arrangement, fracturing sequences, and fracturing techniques are applied to study the feasibility of the sectorial well-factory design. The results show that the “gradual” or “sparse” stage arrangement, large injection rate, and simultaneous multifracture treatment can help to optimize the fracture morphology and stimulation design. However, the subsequent stress shadowing effect usually adversely affects the fracturing of adjacent wells. With a small initial horizontal stress difference, large injection rate and staggered stage arrangement can achieve ideal stimulation performance. Our results can provide a guidance for optimizing stimulation design in unconventional well-factory while taking into account environmental protection.展开更多
Amphiphilic polymer gels are widely used in heterogeneous reservoirs for conformance control technology.However,in high temperature and high salinity of calcium and magnesium reservoirs,amphiphilic polymer gels cannot...Amphiphilic polymer gels are widely used in heterogeneous reservoirs for conformance control technology.However,in high temperature and high salinity of calcium and magnesium reservoirs,amphiphilic polymer gels cannot maintain effective performance.In this work,a novel reinforced amphiphilic polymer gel(F-PADC gel)was prepared by physically mixing polymer solution and fly ash(FA),which is an extremely low cost material.The viscoelasticity and stability of the F-PADC gel were studied by rheometry and micro-rheometry.The reinforced mechanism of FA on amphiphilic polymer gels was revealed.The results show that the addition of FA can make the gel more robust with a denser network structure.On the fifth day,the elastic modulus(G’)increases from 5.2 to 7.0 Pa and the viscosity modulus(G")increases from 0.4 to 0.6 Pa at the frequency of 1 Hz,which improves the viscoelasticity of the gel system.More importantly,the F-PADC gel does not degrade after aging at 85℃for 180 d.And its viscoelasticity increases obviously,G′and G"increase to 110.0 Pa and 3.5 Pa,respectively,showing excellent anti-aging stability.Moreover,FA amphiphilic polymer gels have a good injectivity and a perfect plugging rate of 98.86%,which is better than that of sole amphiphilic polymer gels.This novel mixed FA amphiphilic polymer gels can prove to be a better alternative to conventional polymer gels to enhance oil recovery in high temperature and high salinity reservoirs.展开更多
The quantitative understanding of hydraulic fracture(HF)properties guides accurate production forecasts and reserve estimation.Type curve is a powerful technique to characterize HF and reservoir properties from flowba...The quantitative understanding of hydraulic fracture(HF)properties guides accurate production forecasts and reserve estimation.Type curve is a powerful technique to characterize HF and reservoir properties from flowback and long-term production data.However,two-phase flow of water and hydrocarbon after an HF stimulation together with the complex transport mechanisms in shale nanopores exacerbate the nonlinearity of the transport equation,causing errors in type-curve analysis.Accordingly,we propose a new two-phase type-curve method to estimate HF properties,such as HF volume and permeability of fracture,through the analysis of flowback data of multi-fractured shale wells.The proposed type curve is based on a semianalytical solution that couples the two-phase flow from the matrix with the flow in HF by incorporating matrix influx,slippage effect,stress dependence,and the spatial variation of fluid properties in inorganic and organic pores.For the first time,multiple fluid transport mechanisms are considered into two-phase type-curve analysis for shale reservoirs.We analyze the flowback data from a multi-fractured horizontal well in a shale gas reservoir to verify the field application of the proposed method.The results show that the fracture properties calculated by the type-curve method are in good agreement with the long-time production data.展开更多
Regulating rheological properties of water-based drilling fluids has always been a hot topic.This paper proposed a new method for regulating rheological properties of water-based drilling fluids by ultrasonic field.Th...Regulating rheological properties of water-based drilling fluids has always been a hot topic.This paper proposed a new method for regulating rheological properties of water-based drilling fluids by ultrasonic field.The experimental results showed that the ultrasound increased the viscosity and yield point of bentonite suspension by reducing the particle size of clay,destroying the network structure between clay particles,increasing the mud yield and the cation exchange capacity of bentonite,and promoting the hydration dispersion of bentonite.The change of rheological property showed a memory effect at room temperature and high temperature.Besides,the ultrasonic energy affected the network structure between clays and polymer chains,thus regulating the rheological properties of the bentonite-polymer system.For two types of drilling fluids investigated,the rheology of the poly-sulfonate drilling fluid was regulated by damaging the grid structure between additives and clays by low-power ultrasound and reducing the clay particle size by high-power ultrasound,while the rheology of the deep-water drilling fluid was mainly regulated by disentangling the spatial grid structure between additives.Additionally,ultrasound showed no effect on the lubricity,inhibition and stability of drilling fluids,which proved the feasibility of ultrasound to regulate rheological properties of water-based drilling fluids.展开更多
基金the financial support of the National Key Research and Development Program of China(2020YFA0711804)the National Natural Science Foundation of China(Grant No.52074332)express their gratitude to project ZR2020YQ36 supported by Shandong Provincial Natural Science Foundation.
文摘The shale oil reservoir is characterized by tight lithology and ultra-low permeability,and its efficient exploitation requires the technology of multi-stage and multi-cluster hydraulic fracturing in horizontal wells and shut-in imbibition.After multi-stage and multi-cluster hydraulic fracturing,a complex fracture network is formed,and a large volume of frac fluid is stored within the fracture network.During shut-in,imbibition and exchange between oil and water occurs under the action of the capillary force and osmotic pressure,and the formation pressure builds up in the shale reservoir.On basis of the characteristics of shale oil reservoir,we establish a model of imbibition during fracturing injection and shut-in by coupling oilewater two-phase flow and saline ion diffusion in the hydraulic fractures(HFs)network,natural fractures(NFs)and matrix system under the action of capillary force and osmotic pressure.The DFN method and the multiple continuum method are introduced to characterize fluid flow between the HF and the NF and that between the NF and the matrix respectively,which avoids the problem of a large amount of computation of seepage within the complex fracture.Then,the discrete fracture network(DFN)model and the multiple continuum model are solved with the finite element method,and it is verified in flow field,saturation field and concentration field that the models are accurate and reliable.We propose the imbibition exchange volume for quantitative evaluation of the imbibition degree and a method of calculating the imbibition exchange volume.Simulation of oil and water flow in the fracturing and shut-in stages is performed based on these models.It is found that imbibition in the shale reservoir is driven by mechanisms of pressure difference,capillary force and osmotic pressure.The osmotic pressure and capillary force only cause an increase in the imbibition rate and a reduction in the imbibition equilibrium time and do not lead to variation in the peak of imbibition exchange volume.The imbibition equilibrium time under the action of the capillary force and osmotic pressure is reduced from 150 to 45 d compared with that under the action of the pressure difference.If imbibition equilibrium is reached,low initial water saturation,strong rock compressibility,high formation water salinity and high matrix permeability enhance imbibition and exchange of oil and water in the reservoir.The leakoff volume of frac fluid is generally larger than the imbibition exchanged volume.Leakoff equilibrium occurs slightly earlier than imbibition equilibrium.The imbibition equilibrium time is mainly affected by reservoir permeability and NF density.The number of interconnected fractures mainly affects the frac fluid volume within the hydraulic fracture in the fracturing process.The stimulated reservoir volume(SRV)mainly affects frac fluid imbibition exchange in the shut-in process.
基金funded by the National Science and Technology Major Project (2016ZX05061-003-001)Major Project of CNOOC (CNOOC-KJ135ZDXMLTD14)National Natural Science Foundation of China (41672116, 41672125)。
文摘The pore-throat systems and physical properties of tight sandstone reservoirs are complex,and deposition is thought to be a fundamental control for them.In this study,the impacts of the full ranges of rock types(from pebbly coarse sandstone to fine sandstone) on the pore structures and physical properties of the Permian tight sandstone reservoir in the eastern Ordos Basin were investigated comprehensively through a series of experiments including conventional physical testing,thin-section analysis,scanning electron microscopy,nuclear magnetic resonance analysis and high-pressure mercury injection tests.The results showed that the coarser-grained sandstones tend to have higher feldspar content and lower percentage of cements,leading to strong dissolution,weak cementation and improved porosity and permeability.The medium sandstone has the highest level of quartz and the lowest average content of feldspar,resulting in strong heterogeneity of physical properties.Only those medium sandstone reservoirs with relatively high content of feldspars have better physical properties.Additionally,the coarser-grained sandstones contain relatively large dissolution pores(nearly 200 μm),whereas the finer-grained sandstones have more intercrystalline pores with a relatively more homogeneous pore structure.The pebbly coarse sandstone and coarse sandstone reservoirs are favorable targets with best physical properties.
基金supported by the Natural Science Youth Project of University Scientific Research Plan in Xinjiang(XJEDU2021Y053)the Talent Introduction Research Project of China University of Petroleum Beijing at Karamay(XQSQ20200056)+1 种基金Development of Conglomerate Reservoir Laboratory in Xinjiang(2019D04008)the Strategic Cooperation Technology Projects of CNPC and CUPB(Grant No.ZLZX2020-01).
文摘Tight reservoirs are typically developed by horizontal wells and multi-stage hydraulic fracturing.The conglomerate reservoir is one type of tight reservoirs,which is different from homogeneous rock,such as tight sandstone.This is because that the existence of gravels makes conglomerate have strong hetero-geneity.Thus,it is difficult to grasp the fracture mechanism and the law of fracture propagation of conglomerate,which limits the efficient development of the conglomerate reservoir.In this paper,the fracture characteristics and factors influencing the fracturing of Mahu conglomerate were studied by uniaxial compression,acoustic emission monitoring and X-ray computed tomography(CT)scanning experiments.The results show that the fracture characteristics of conglomerates are influenced by the gravel content and cement.The conglomerate in the study area is mainly divided into carbonate cemented conglomerate and clay cemented conglomerate.The fracture complexity of carbonate cemented conglomerate first increases and then decreases with increasing gravel content.However,for clay cemented conglomerates,the fracture complexity increases over the gravel content.The crack development stress is a significant parameter in the crack assessment of conglomerates.This study is useful to understand the influence of meso-fabric characteristics of conglomerates on their fracturing and crack evolution and guides the design of hydraulic fracturing.
基金funded by the National Natural Science Foundation of China(42077247,52104029)the Fundamental Research Funds for the Central Universities.
文摘In the Changqing Oilfield in northwest China, when traditional petroleum exploitation encounters forestry reserves or water source protection areas, sectorial well-factory design is proposed. The most distinct feature of a sectorial well-factory is the deviation of the well from the minimum horizontal principal stress, resulting in hydraulic fracture deflection after the initiation, along with possible well interference (i.e., fracture hit) and fracture coalescence in the oblique wells. Four indexes describing well deflection are then proposed according to fracture morphology. Several fracturing designs, including stage arrangement, fracturing sequences, and fracturing techniques are applied to study the feasibility of the sectorial well-factory design. The results show that the “gradual” or “sparse” stage arrangement, large injection rate, and simultaneous multifracture treatment can help to optimize the fracture morphology and stimulation design. However, the subsequent stress shadowing effect usually adversely affects the fracturing of adjacent wells. With a small initial horizontal stress difference, large injection rate and staggered stage arrangement can achieve ideal stimulation performance. Our results can provide a guidance for optimizing stimulation design in unconventional well-factory while taking into account environmental protection.
基金supported by Key Program of National Natural Science Foundation of China(No.52130401)National Natural Science Foundation of China(No.52104055)+1 种基金China National Postdoctoral Program for Innovative Talents(No.BX20200386)China Postdoctoral Science Foundation(No.2021M703586)。
文摘Amphiphilic polymer gels are widely used in heterogeneous reservoirs for conformance control technology.However,in high temperature and high salinity of calcium and magnesium reservoirs,amphiphilic polymer gels cannot maintain effective performance.In this work,a novel reinforced amphiphilic polymer gel(F-PADC gel)was prepared by physically mixing polymer solution and fly ash(FA),which is an extremely low cost material.The viscoelasticity and stability of the F-PADC gel were studied by rheometry and micro-rheometry.The reinforced mechanism of FA on amphiphilic polymer gels was revealed.The results show that the addition of FA can make the gel more robust with a denser network structure.On the fifth day,the elastic modulus(G’)increases from 5.2 to 7.0 Pa and the viscosity modulus(G")increases from 0.4 to 0.6 Pa at the frequency of 1 Hz,which improves the viscoelasticity of the gel system.More importantly,the F-PADC gel does not degrade after aging at 85℃for 180 d.And its viscoelasticity increases obviously,G′and G"increase to 110.0 Pa and 3.5 Pa,respectively,showing excellent anti-aging stability.Moreover,FA amphiphilic polymer gels have a good injectivity and a perfect plugging rate of 98.86%,which is better than that of sole amphiphilic polymer gels.This novel mixed FA amphiphilic polymer gels can prove to be a better alternative to conventional polymer gels to enhance oil recovery in high temperature and high salinity reservoirs.
基金This research is supported by National Natural Science Foundation of China(No.52204057)the Science Foundation of China University of Petroleum,Beijing(No.2462021BJRC003 and 2462021YJRC012).
文摘The quantitative understanding of hydraulic fracture(HF)properties guides accurate production forecasts and reserve estimation.Type curve is a powerful technique to characterize HF and reservoir properties from flowback and long-term production data.However,two-phase flow of water and hydrocarbon after an HF stimulation together with the complex transport mechanisms in shale nanopores exacerbate the nonlinearity of the transport equation,causing errors in type-curve analysis.Accordingly,we propose a new two-phase type-curve method to estimate HF properties,such as HF volume and permeability of fracture,through the analysis of flowback data of multi-fractured shale wells.The proposed type curve is based on a semianalytical solution that couples the two-phase flow from the matrix with the flow in HF by incorporating matrix influx,slippage effect,stress dependence,and the spatial variation of fluid properties in inorganic and organic pores.For the first time,multiple fluid transport mechanisms are considered into two-phase type-curve analysis for shale reservoirs.We analyze the flowback data from a multi-fractured horizontal well in a shale gas reservoir to verify the field application of the proposed method.The results show that the fracture properties calculated by the type-curve method are in good agreement with the long-time production data.
基金financially supported by the National Natural Science Foundation of China(No.51974351No.51704322+1 种基金Major Program,No.51991361)the National Science and Technology Major Project of China(No.2016ZX05040-005)。
文摘Regulating rheological properties of water-based drilling fluids has always been a hot topic.This paper proposed a new method for regulating rheological properties of water-based drilling fluids by ultrasonic field.The experimental results showed that the ultrasound increased the viscosity and yield point of bentonite suspension by reducing the particle size of clay,destroying the network structure between clay particles,increasing the mud yield and the cation exchange capacity of bentonite,and promoting the hydration dispersion of bentonite.The change of rheological property showed a memory effect at room temperature and high temperature.Besides,the ultrasonic energy affected the network structure between clays and polymer chains,thus regulating the rheological properties of the bentonite-polymer system.For two types of drilling fluids investigated,the rheology of the poly-sulfonate drilling fluid was regulated by damaging the grid structure between additives and clays by low-power ultrasound and reducing the clay particle size by high-power ultrasound,while the rheology of the deep-water drilling fluid was mainly regulated by disentangling the spatial grid structure between additives.Additionally,ultrasound showed no effect on the lubricity,inhibition and stability of drilling fluids,which proved the feasibility of ultrasound to regulate rheological properties of water-based drilling fluids.
