Based on the upper bound of limit analysis, the plane-strain analysis of the slopes reinforced with a row of piles to the 3D case was extended. A 3D rotational failure mechanism was adopted to yield the upper bound of...Based on the upper bound of limit analysis, the plane-strain analysis of the slopes reinforced with a row of piles to the 3D case was extended. A 3D rotational failure mechanism was adopted to yield the upper bound of the factor of safety. Parametric studies were carried out to explore the end effects of the slope failures and the effects of the pile location and diameter on the safety of the reinforced slopes. The results demonstrate that the end effects nearly have no effects on the most suitable location of the installed piles but have significant influence on the safety of the slopes. For a slope constrained to a narrow width, the slope becomes more stable owing to the contribution of the end effects. When the slope is reinforced with a row of piles in small space between piles, the effects of group piles are significant for evaluating the safety of slopes. The presented method is more appropriate for assessing the stability of slopes reinforced with piles and can be also utilized in the design of plies stabilizing the unstable slopes.展开更多
The desorption test was conducted to evaluate the desorption behavior of Pb(Ⅱ)and Cd(Ⅱ)using citric acid.The influential factors that were considered included initial Pb(Ⅱ),Cd(Ⅱ)contamination levels in soil,concen...The desorption test was conducted to evaluate the desorption behavior of Pb(Ⅱ)and Cd(Ⅱ)using citric acid.The influential factors that were considered included initial Pb(Ⅱ),Cd(Ⅱ)contamination levels in soil,concentration of citric acid,reaction time,soil pH value and ionic strength.The test results indicated that the desorption was a rapid reaction(less than 6 h),and the removal percentages of Cd(Ⅱ)and Pb(Ⅱ)increased with the increasing contamination levels,concentration of citric acid and the addition of Na^+,Ca^(2+),Na^+, Cl~– and the chelating of organic ligands.展开更多
Based on the results of conventional triaxial compression tests and triaxial compression creep tests on Xiangjiaba sandstone,the failure modes in short-term tests and creep tests,fractography of sandstone after creep ...Based on the results of conventional triaxial compression tests and triaxial compression creep tests on Xiangjiaba sandstone,the failure modes in short-term tests and creep tests,fractography of sandstone after creep failure,short-term and creep failure criterion are analyzed.In the short-term tests and creep tests,the sandstone samples fail in a mix mode consisting of shear failure in a single main plane and tensile failure.Confining pressure can restrict brittle failure and enhance the ductility of sandstone.In the creep tests,brittle fracture is reduced and plastic deformation can fully be developed compared to the condition of short-term tests.And the shear fracture surfaces are flat and they are covered by small particles as a result of friction.When confining pressure increases,particle size decreases while the degree of friction on shear plane increases.On the tensile failure plane,the tensile trace and direction of tearing could be clearly observed.There are obvious tearing steps on the tensile failure plane and tearing laminated structure on the front edge of tearing fracture.The same criterion can be used for the short-term and creep behavior,and the fitting effect using the MOGI criterion is better than the DRUCKER PRAGER criterion.The cohesion and friction angle calculated by the MOGI criterion are in good accordance with those calculated by the MOHR COULOMB criterion.展开更多
For the Guanshui Road Station tunnel project of Guiyang Metro Line 2,the wind pavilion group was moved out of the main tunnel to reduce the number of openings in the main tunnel,and the wind pavilion group was excavat...For the Guanshui Road Station tunnel project of Guiyang Metro Line 2,the wind pavilion group was moved out of the main tunnel to reduce the number of openings in the main tunnel,and the wind pavilion group was excavated in a triangular configuration at the entrance of the main tunnel.Based on the finite element software ABAQUS,a three-dimensional model is established to study the influence of different triangular-distribution tunnels excavation schemes on the surface settlement and tunnel stability.The objective of this study is to reveal the change rules of surface settlement,deformation and force in the support structures and the surrounding rock and identify the best excavation scheme for this tunnel configuration.Results show that to control the surface settlement and the deformation of the support structures,the optimal excavation sequence involves excavating the upper fresh air exhaust tunnel before the lower running tunnel.To control the stress of the support structures,the optimal excavation involves excavating the lower running tunnel before the upper fresh air exhaust tunnel.In this project,the most reasonable excavation sequence of the tunnel is from top to bottom.The most reasonable thickness of tunnel penetration is 5 m.展开更多
To assess the effectiveness of vacuum preloading combined electroosmotic strengthening of ultra-soft soil and study the mechanism of the process, a comprehensive experimental investigation was performed. A laboratory ...To assess the effectiveness of vacuum preloading combined electroosmotic strengthening of ultra-soft soil and study the mechanism of the process, a comprehensive experimental investigation was performed. A laboratory test cell was designed and applied to evaluate the vacuum preloading combined electroosmosis. Several factors were taken into consideration, including the directions of the electroosmotic current and water induced by vacuum preloading and the replenishment of groundwater from the surrounding area. The results indicate that electroosmosis together with vacuum preloading improve the soil strength greatly, with an increase of approximately 60%, and reduce the water content of the soil on the basis of consolidation of vacuum preloading, howeve~ further settlement is not obvious with only 1.7 mm. The reinforcement effect of vacuum preloading combined electroosmosis is better than that of electroosmosis after vacuum preloading. Elemental analysis using X-ray fluorescence proves that the soil strengthening during electroosmotic period in this work is mainly caused by electroosmosis-induced electrochemical reactions, the concentrations of Al2O3 in the VPCEO region increase by 2.2%, 1.5%, and 0.9% at the anode, the midpoint between the electrodes, and the cathode, respectively.展开更多
Many high earth-rockfill dams are constructed in the west of China. The seismic intensity at the dam site is usually very high, thus it is of great importance to ensure the safety of the dam in meizoseismal area. A 3D...Many high earth-rockfill dams are constructed in the west of China. The seismic intensity at the dam site is usually very high, thus it is of great importance to ensure the safety of the dam in meizoseismal area. A 3D FEM model is established to analyze the seismic responses of Shiziping earth-rockfill dam. The nonlinear elastic Duncan-Chang constitutive model and the equivalent viscoelastic constitutive model are used to simulate the static and dynamic stress strain relationships of the dam materials, respectively. Four groups of seismic waves are inputted from the top of the bedrock to analyze the dynamic responses of the dam. The numerical results show that the calculated dynamic magnification factors display a good consistency with the specification values. The site spectrum results in larger acceleration response than the specification spectrum. The analysis of relative dynamic displacement indicates that the displacement at the downstream side of the dam is larger than that at the upstream side. The displacement response reduces from the center of river valley to two banks. The displacement responses corresponding to the specification spectrum are a little smaller than those corresponding to the site spectrum. The analysis of shear stress indicates that a large shear stress area appears in the upstream overburden layer, where the shear stress caused by site waves is larger than that caused by specification waves. The analysis of dynamic principal stress indicates that the minimum dynamic stresses in corridor caused by specification and site waves have little difference. The maximum and minimum dynamic stresses are relatively large at two sides. The largest tensile stress occurs at two sides of the floor of grouting corridor, which may result in the crack near the corridor side. The numerical results present good consistency with the observation data of the grouting corridor in Wenchuan earthquake.展开更多
Past earthquakes have revealed that topographic features have significant impacts on the characteristics of ground motions,which may cause the amplification and de-amplification of input seismic waves.The topographic ...Past earthquakes have revealed that topographic features have significant impacts on the characteristics of ground motions,which may cause the amplification and de-amplification of input seismic waves.The topographic effect with the assumption of plane seismic waves on the seismic responses of bridges has been investigated in the existing literature;however,the influence of near-source topographic effects has not been thoroughly understood.The objective of this study is to numerically explore the near-source topographic effects on the seismic behaviors of an existing railway bridge crossing a symmetrical V-shaped canyon.The influence of the source of incident waves is estimated.Numerical results demonstrate that the topographic effects can noticeably amplify the seismic responses of the bridge.Compared to the bridge without crossing a canyon,the peak displacements of the girder,pier,and bearing in the case of the canyon crossing bridge increase by 15.2%,2.9%−14.5%,and 24.2%−229.6%,respectively.The piers at the illuminated side of the canyon experience larger seismic responses compared to the piers at the shaded side of the canyon due to the unequal motion amplitudes at each support.As the source-to-canyon distance increases,the seismic responses of the piers show an increasing trend.展开更多
During CO_(2) injection in deep saline aquifers, salt precipitation happens around the injection well because of capillary driven back flow, inducing permeability impairment. The permeability impairment affects CO_(2)...During CO_(2) injection in deep saline aquifers, salt precipitation happens around the injection well because of capillary driven back flow, inducing permeability impairment. The permeability impairment affects CO_(2) injectivity and migration. Different values of three characteristic parameters for capillary pressure function (air entry pressure, empirical parameter m and liquid residual saturation) as well as input absolute value of maximum capillary are chosen in numerical simulation to figure out their effects on salt precipitation. Verma & Pruess model is then used for quantifying permeability impairment. Results show that permeability decreases with higher air entry pressure, larger liquid residual saturation, and especially smaller value of empirical parameter m. To enhance CO_(2) injectivity and avoid blocking of CO_(2) migration, a homogenous formation with large pore size should be chosen before CO_(2) injection into deep saline aquifer.展开更多
基金Projects(51278382,51479050)supported by the National Natural Science Foundation of ChinaProject(2015CB057901)supported by the National Key Basic Research Program of China+3 种基金Project(201501035-03)supported by the Public Service Sector R&D Project of Ministry of Water Resource of ChinaProject(2014B06814)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(B13024)supported by the"111"ProjectProject(YK913004)supported by the Open Foundation of Key Laboratory of Failure Mechanism and Safety Control Techniques of Earthrock Dam of the Ministry of Water Resources,China
文摘Based on the upper bound of limit analysis, the plane-strain analysis of the slopes reinforced with a row of piles to the 3D case was extended. A 3D rotational failure mechanism was adopted to yield the upper bound of the factor of safety. Parametric studies were carried out to explore the end effects of the slope failures and the effects of the pile location and diameter on the safety of the reinforced slopes. The results demonstrate that the end effects nearly have no effects on the most suitable location of the installed piles but have significant influence on the safety of the slopes. For a slope constrained to a narrow width, the slope becomes more stable owing to the contribution of the end effects. When the slope is reinforced with a row of piles in small space between piles, the effects of group piles are significant for evaluating the safety of slopes. The presented method is more appropriate for assessing the stability of slopes reinforced with piles and can be also utilized in the design of plies stabilizing the unstable slopes.
基金Projects(51708377,51678311)supported by the National Natural Science Foundation of ChinaProject(BK20170339)supported by the Natural Science Foundation of Jiangsu Province,China+6 种基金Project(2016M591756)supported by the China Postdoctoral Science FoundationProject(17KJB560008)supported by the Natural Science Fund for Colleges and Universities in Jiangsu Province,ChinaProject(1601175C)supported by the Jiangsu Planned Projects for Postdoctoral Research Funds,ChinaProject(2016ZD18)supported by the Jiangsu Provincial Department of Housing and Urban-Rural Development,ChinaProject(2016T05)supported by the Jiangsu Provincial Transport Bureau,ChinaProject(2017A610304)supported by the Natural Science Foundation of Ningbo City,ChinaProject supported by the Bureau of Housing and Urban-Rural Development of Suzhou,China
文摘The desorption test was conducted to evaluate the desorption behavior of Pb(Ⅱ)and Cd(Ⅱ)using citric acid.The influential factors that were considered included initial Pb(Ⅱ),Cd(Ⅱ)contamination levels in soil,concentration of citric acid,reaction time,soil pH value and ionic strength.The test results indicated that the desorption was a rapid reaction(less than 6 h),and the removal percentages of Cd(Ⅱ)and Pb(Ⅱ)increased with the increasing contamination levels,concentration of citric acid and the addition of Na^+,Ca^(2+),Na^+, Cl~– and the chelating of organic ligands.
基金Project(2011CB013504)supported by National Basic Research Program of ChinaProjects(51109069,11172090)supported by the National Natural Science Foundation of China+1 种基金Project(2009B14014)supported by the Fundamental Research Funds for the Central Universities of ChinaProject Financially supported by the Program for Changjiang Scholars and lnnovative Research Team in University,China
文摘Based on the results of conventional triaxial compression tests and triaxial compression creep tests on Xiangjiaba sandstone,the failure modes in short-term tests and creep tests,fractography of sandstone after creep failure,short-term and creep failure criterion are analyzed.In the short-term tests and creep tests,the sandstone samples fail in a mix mode consisting of shear failure in a single main plane and tensile failure.Confining pressure can restrict brittle failure and enhance the ductility of sandstone.In the creep tests,brittle fracture is reduced and plastic deformation can fully be developed compared to the condition of short-term tests.And the shear fracture surfaces are flat and they are covered by small particles as a result of friction.When confining pressure increases,particle size decreases while the degree of friction on shear plane increases.On the tensile failure plane,the tensile trace and direction of tearing could be clearly observed.There are obvious tearing steps on the tensile failure plane and tearing laminated structure on the front edge of tearing fracture.The same criterion can be used for the short-term and creep behavior,and the fitting effect using the MOGI criterion is better than the DRUCKER PRAGER criterion.The cohesion and friction angle calculated by the MOGI criterion are in good accordance with those calculated by the MOHR COULOMB criterion.
基金Projects(B200204032,2019B07914)supported by the Fundamental Research Funds for the Central Universities,ChinaProjects(51878667,51678571,51808193)supported by the National Natural Science Foundation of China。
文摘For the Guanshui Road Station tunnel project of Guiyang Metro Line 2,the wind pavilion group was moved out of the main tunnel to reduce the number of openings in the main tunnel,and the wind pavilion group was excavated in a triangular configuration at the entrance of the main tunnel.Based on the finite element software ABAQUS,a three-dimensional model is established to study the influence of different triangular-distribution tunnels excavation schemes on the surface settlement and tunnel stability.The objective of this study is to reveal the change rules of surface settlement,deformation and force in the support structures and the surrounding rock and identify the best excavation scheme for this tunnel configuration.Results show that to control the surface settlement and the deformation of the support structures,the optimal excavation sequence involves excavating the upper fresh air exhaust tunnel before the lower running tunnel.To control the stress of the support structures,the optimal excavation involves excavating the lower running tunnel before the upper fresh air exhaust tunnel.In this project,the most reasonable excavation sequence of the tunnel is from top to bottom.The most reasonable thickness of tunnel penetration is 5 m.
基金Project(2009B13014) supported by the Fundamental Research Funds for the Central Universities of ChinaProject(IRT1125) supported by the Program for Changjiang Scholars and Innovative Research Team in University,China
文摘To assess the effectiveness of vacuum preloading combined electroosmotic strengthening of ultra-soft soil and study the mechanism of the process, a comprehensive experimental investigation was performed. A laboratory test cell was designed and applied to evaluate the vacuum preloading combined electroosmosis. Several factors were taken into consideration, including the directions of the electroosmotic current and water induced by vacuum preloading and the replenishment of groundwater from the surrounding area. The results indicate that electroosmosis together with vacuum preloading improve the soil strength greatly, with an increase of approximately 60%, and reduce the water content of the soil on the basis of consolidation of vacuum preloading, howeve~ further settlement is not obvious with only 1.7 mm. The reinforcement effect of vacuum preloading combined electroosmosis is better than that of electroosmosis after vacuum preloading. Elemental analysis using X-ray fluorescence proves that the soil strengthening during electroosmotic period in this work is mainly caused by electroosmosis-induced electrochemical reactions, the concentrations of Al2O3 in the VPCEO region increase by 2.2%, 1.5%, and 0.9% at the anode, the midpoint between the electrodes, and the cathode, respectively.
基金Foundation item： Project（IRTl125） supported by the Program for Changjiang Scholars and Innovative Research Team in Universities of China Project（B13024） supported by the ＂111＂ Project Project（BK2012811） supported by the Natural Science Foundation of Jiangsu Province, China
文摘Many high earth-rockfill dams are constructed in the west of China. The seismic intensity at the dam site is usually very high, thus it is of great importance to ensure the safety of the dam in meizoseismal area. A 3D FEM model is established to analyze the seismic responses of Shiziping earth-rockfill dam. The nonlinear elastic Duncan-Chang constitutive model and the equivalent viscoelastic constitutive model are used to simulate the static and dynamic stress strain relationships of the dam materials, respectively. Four groups of seismic waves are inputted from the top of the bedrock to analyze the dynamic responses of the dam. The numerical results show that the calculated dynamic magnification factors display a good consistency with the specification values. The site spectrum results in larger acceleration response than the specification spectrum. The analysis of relative dynamic displacement indicates that the displacement at the downstream side of the dam is larger than that at the upstream side. The displacement response reduces from the center of river valley to two banks. The displacement responses corresponding to the specification spectrum are a little smaller than those corresponding to the site spectrum. The analysis of shear stress indicates that a large shear stress area appears in the upstream overburden layer, where the shear stress caused by site waves is larger than that caused by specification waves. The analysis of dynamic principal stress indicates that the minimum dynamic stresses in corridor caused by specification and site waves have little difference. The maximum and minimum dynamic stresses are relatively large at two sides. The largest tensile stress occurs at two sides of the floor of grouting corridor, which may result in the crack near the corridor side. The numerical results present good consistency with the observation data of the grouting corridor in Wenchuan earthquake.
基金Projects(51908123,51678140,U1934205)supported by the National Natural Science Foundation of ChinaProjects(BK20190370,BK20180383) supported by the Natural Science Foundation of Jiangsu Province,China+1 种基金Project(18KJA580005) supported by the Natural Science Foundation of Jiangsu Higher Education Institutions of ChinaProject(KYY2019096(19-21)) supported by the Science and Technology Research Plan of China Railway Eryuan Engineering Group Corporation。
文摘Past earthquakes have revealed that topographic features have significant impacts on the characteristics of ground motions,which may cause the amplification and de-amplification of input seismic waves.The topographic effect with the assumption of plane seismic waves on the seismic responses of bridges has been investigated in the existing literature;however,the influence of near-source topographic effects has not been thoroughly understood.The objective of this study is to numerically explore the near-source topographic effects on the seismic behaviors of an existing railway bridge crossing a symmetrical V-shaped canyon.The influence of the source of incident waves is estimated.Numerical results demonstrate that the topographic effects can noticeably amplify the seismic responses of the bridge.Compared to the bridge without crossing a canyon,the peak displacements of the girder,pier,and bearing in the case of the canyon crossing bridge increase by 15.2%,2.9%−14.5%,and 24.2%−229.6%,respectively.The piers at the illuminated side of the canyon experience larger seismic responses compared to the piers at the shaded side of the canyon due to the unequal motion amplitudes at each support.As the source-to-canyon distance increases,the seismic responses of the piers show an increasing trend.
基金Foundation item:Project(51179060)supported by the National Natural Science Foundation of ChinaProject(20110094130002)supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China
文摘During CO_(2) injection in deep saline aquifers, salt precipitation happens around the injection well because of capillary driven back flow, inducing permeability impairment. The permeability impairment affects CO_(2) injectivity and migration. Different values of three characteristic parameters for capillary pressure function (air entry pressure, empirical parameter m and liquid residual saturation) as well as input absolute value of maximum capillary are chosen in numerical simulation to figure out their effects on salt precipitation. Verma & Pruess model is then used for quantifying permeability impairment. Results show that permeability decreases with higher air entry pressure, larger liquid residual saturation, and especially smaller value of empirical parameter m. To enhance CO_(2) injectivity and avoid blocking of CO_(2) migration, a homogenous formation with large pore size should be chosen before CO_(2) injection into deep saline aquifer.
