This paper explores the deformation mechanism and control technology of roof pre-splitting for gob-side entries in hard roof full-mechanized longwall caving panel(LTCC).The investigation utilizes a comprehensive appro...This paper explores the deformation mechanism and control technology of roof pre-splitting for gob-side entries in hard roof full-mechanized longwall caving panel(LTCC).The investigation utilizes a comprehensive approach that integrates field monitoring,theoretical analysis,and numerical simulation.Theoretical analysis has illuminated the influence of the length of the lateral cantilever beam of the main roof(LCBM)above the roadway on the stability of the gob-side entry behind the panel.Numerical simulations have further revealed that the longer LCBM results in heightened vertical stress within the coal pillar,developed cracks around the roadway,and more pronounced damage to the roadway.Moreover,numerical simulations also demonstrate the potential of roof pre-splitting technology in optimizing the fracture position of the hard roof.This technology significantly reduces the length of the LCBM,thereby alleviating stress concentration in the coal pillars and integrated coal rib while minimizing the destruction of the gob-side entry.Therefore,this manuscript first proposes the use of roof pre-splitting technology to control roadway deformation,and automatically retain the entry within a hard roof LTCC panel.Field implementation has demonstrated that the proposed automatically retained entry by roof pre-splitting technology effectively reduces gob-side entry deformation and achieves automatically retained entry.展开更多
Acoustic emission tests were performed using a split Hopkinson pressure bar system(SHPB) on 50-mm-diameter bars of granite, limestone, sandstone and skarn. The results show that the amplitude distribution of hits is n...Acoustic emission tests were performed using a split Hopkinson pressure bar system(SHPB) on 50-mm-diameter bars of granite, limestone, sandstone and skarn. The results show that the amplitude distribution of hits is not well centralized around 50 d B, and that some hits with large amplitudes, usually larger than 70 d B, occur in the early stages of each test, which is different from the findings from static and low-loading-rate tests. Furthermore, the dominant frequency range of the recorded acoustic emission waveforms is between 300 k Hz and 500 k Hz, and frequency components higher than 500 k Hz are not significant. The hit with the largest values of amplitude, counts, signal strength, and absolute energy in each test, displays a waveform with similar frequency characteristics and greater correlation with the waveform obtained from the elastic input bar of the split Hopkinson pressure bar system compared with the waveforms of the other hits. This indicates that the hit with the largest values of amplitude, counts, signal strength, and absolute energy is generated by elastic wave propagation instead of fracture within the rock specimen.展开更多
To investigate the influence of confining pressure and pore water pressure on strength characteristics,energy storage state and energy release intensity at peak failure of deep sandstone,a series of triaxial compressi...To investigate the influence of confining pressure and pore water pressure on strength characteristics,energy storage state and energy release intensity at peak failure of deep sandstone,a series of triaxial compression tests under hydraulic coupling conditions are carried out.By analyzing the process of rock deformation and failure,the stress thresholds of the rock are obtained.The change trend of total energy density,elastic energy density and dissipated energy density of deep sandstone in the pre-peak stage is obtained by the graphical integration method.By comparing the dynamic energy storage level of rocks under different confining pressures,the influence of pore water pressure on the energy dissipation at stress thresholds of crack closure stress,crack initiation stress,crack damage stress and peak stress is analyzed.Based on the ratio of pre-peak total energy density to post-peak total energy density,the interaction mechanism of confining pressure and pore water pressure for the rock burst proneness of deep sandstone is studied.The experimental results show that the peak stress of sandstone increases with the increase of confining pressure,while the existence of pore water pressure can weaken the peak stress of sandstone.In the stress stage from crack closure stress to peak stress,the dynamic energy storage level of rock presents a trend of the inverse“check mark”.Meanwhile,the larger the confining pressure,the higher the energy storage level of rock.However,the pore water pressure increases the degree of energy dissipation of rock and reduces the energy storage capacity of rock,and the degree of dissipation is linear with pore water pressure.The increase of confining pressure aggravates the instability and failure of deep sandstone,while pore water pressure has the opposite effect.The research results will provide necessary data support for the stability analysis of rock mass excavation in sandstone stratum under high stress and high pore water pressure.展开更多
基金Project(52104139)supported by the National Natural Science Foundation of China Youth Science FoundationProject(SKLGDUEK2132)supported by the State Key Laboratory for Geomechanics and Deep Underground Engineering,China University of Mining and Technology/China University of Mining and Technology-BeijingProjects([2020]2Y030,[2020]2Y019,[2020j3007,[2020]3008,and[2022j0il]supported by the Guizhou Province Science and Technology Planning,China Project(2022B01051)supported by the Key Research and Development Special Tasks of Xinjiang,China。
文摘This paper explores the deformation mechanism and control technology of roof pre-splitting for gob-side entries in hard roof full-mechanized longwall caving panel(LTCC).The investigation utilizes a comprehensive approach that integrates field monitoring,theoretical analysis,and numerical simulation.Theoretical analysis has illuminated the influence of the length of the lateral cantilever beam of the main roof(LCBM)above the roadway on the stability of the gob-side entry behind the panel.Numerical simulations have further revealed that the longer LCBM results in heightened vertical stress within the coal pillar,developed cracks around the roadway,and more pronounced damage to the roadway.Moreover,numerical simulations also demonstrate the potential of roof pre-splitting technology in optimizing the fracture position of the hard roof.This technology significantly reduces the length of the LCBM,thereby alleviating stress concentration in the coal pillars and integrated coal rib while minimizing the destruction of the gob-side entry.Therefore,this manuscript first proposes the use of roof pre-splitting technology to control roadway deformation,and automatically retain the entry within a hard roof LTCC panel.Field implementation has demonstrated that the proposed automatically retained entry by roof pre-splitting technology effectively reduces gob-side entry deformation and achieves automatically retained entry.
基金Projects(51204206,41272304,41372278) supported by the National Natural Science Foundation of ChinaProject(20110162120057) supported by Ph D Program Foundation of Ministry of Education ChinaProject(201012200232) supported by the Freedom Explore Program of Central South University,China
文摘Acoustic emission tests were performed using a split Hopkinson pressure bar system(SHPB) on 50-mm-diameter bars of granite, limestone, sandstone and skarn. The results show that the amplitude distribution of hits is not well centralized around 50 d B, and that some hits with large amplitudes, usually larger than 70 d B, occur in the early stages of each test, which is different from the findings from static and low-loading-rate tests. Furthermore, the dominant frequency range of the recorded acoustic emission waveforms is between 300 k Hz and 500 k Hz, and frequency components higher than 500 k Hz are not significant. The hit with the largest values of amplitude, counts, signal strength, and absolute energy in each test, displays a waveform with similar frequency characteristics and greater correlation with the waveform obtained from the elastic input bar of the split Hopkinson pressure bar system compared with the waveforms of the other hits. This indicates that the hit with the largest values of amplitude, counts, signal strength, and absolute energy is generated by elastic wave propagation instead of fracture within the rock specimen.
基金Project(2016YFC0600801)supported by the National Key Research Development Program of ChinaProject(51774021)supported by the National Natural Science Foundation of ChinaProject(2019SDZY05)supported by the Major Scientific and Technological Innovation Project of Shandong Province,China。
文摘To investigate the influence of confining pressure and pore water pressure on strength characteristics,energy storage state and energy release intensity at peak failure of deep sandstone,a series of triaxial compression tests under hydraulic coupling conditions are carried out.By analyzing the process of rock deformation and failure,the stress thresholds of the rock are obtained.The change trend of total energy density,elastic energy density and dissipated energy density of deep sandstone in the pre-peak stage is obtained by the graphical integration method.By comparing the dynamic energy storage level of rocks under different confining pressures,the influence of pore water pressure on the energy dissipation at stress thresholds of crack closure stress,crack initiation stress,crack damage stress and peak stress is analyzed.Based on the ratio of pre-peak total energy density to post-peak total energy density,the interaction mechanism of confining pressure and pore water pressure for the rock burst proneness of deep sandstone is studied.The experimental results show that the peak stress of sandstone increases with the increase of confining pressure,while the existence of pore water pressure can weaken the peak stress of sandstone.In the stress stage from crack closure stress to peak stress,the dynamic energy storage level of rock presents a trend of the inverse“check mark”.Meanwhile,the larger the confining pressure,the higher the energy storage level of rock.However,the pore water pressure increases the degree of energy dissipation of rock and reduces the energy storage capacity of rock,and the degree of dissipation is linear with pore water pressure.The increase of confining pressure aggravates the instability and failure of deep sandstone,while pore water pressure has the opposite effect.The research results will provide necessary data support for the stability analysis of rock mass excavation in sandstone stratum under high stress and high pore water pressure.
基金Project(202206430008) supported by the China Scholarship Council ProgramProject (52104139) supported by the National Natural Science Foundation of China+2 种基金Project(SKLGDUEK2132) supported by the State Key Laboratory for Geomechanics and Deep Underground Engineering,China University of Mining&Technology/China University of Mining&Technology,Beijing,ChinaProjects([2020]2Y030,[2020]2Y019,[2020]3007,[2020]3008,[2022]011) supported by the Science and Technology Planning of Guizhou Province,ChinaProject(2022B01051) supported by the Key Research and Development Special Tasks of Xinjiang Uygur Autonomous Region,China。
